# # $Id$ # Configuration Table Use ======================= sDeviceName The name of this device. deviceType This field must be RTC_ICM7170. pDeviceFns The device interface control table. This must be icm7170_fns. deviceProbe This is the address of the routine which probes to see if the device is present. pDeviceParams This field specifies the clock frequency. It may be one of the following: ICM7170_AT_32_KHZ ICM7170_AT_1_MHZ ICM7170_AT_2_MHZ ICM7170_AT_4_MHZ ulCtrlPort1 This field is the base address of the RTC area of the chip. ulCtrlPort2 This field is ignored. ulDataPort This field is ignored. getRegister setRegister These follow standard conventions.