/*- * Copyright (c) 1995, David Greenman * Copyright (c) 2001 Jonathan Lemon * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/fxp/if_fxp.c,v 1.118 2001/09/05 23:33:58 brooks Exp $ */ /* * Intel EtherExpress Pro/100B PCI Fast Ethernet driver */ /* * RTEMS Revision Preliminary History * * July XXX, 2002 W. Eric Norum * Placed in RTEMS CVS repository. All further modifications will be * noted in the CVS log and not in this comment. * * July 11, 2002 W. Eric Norum * Minor modifications to get driver working with NIC on VersaLogic * Bobcat PC-104 single-board computer. The Bobcat has no video * driver so printf/printk calls are directed to COM2:. This * arrangement seems to require delays after the printk calls or * else things lock up. Perhaps the RTEMS pc386 console code * should be modified to insert these delays itself. * * June 27, 2002 W. Eric Norum * Obtained from Thomas Doerfler . * A big thank-you to Thomas for making this available. * * October 01, 2001 Thomas Doerfler * Original RTEMS modifications. */ #if defined(__i386__) /*#define DEBUG_OUT 0*/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pci.h" #ifdef NS #include #include #endif #include #include /* for vtophys */ #include #include "if_fxpreg.h" #include "if_fxpvar.h" /* * some adaptation replacements for RTEMS */ static rtems_interval fxp_ticksPerSecond; #define device_printf(device,format,args...) printk(format,## args) #define DELAY(n) rtems_task_wake_after(((n)*fxp_ticksPerSecond/1000000)+1) #ifdef DEBUG_OUT #define DBGLVL_PRINTK(LVL,format, args...) \ if (DEBUG_OUT >= (LVL)) { \ printk(format, ## args); \ } #else #define DBGLVL_PRINTK(LVL,format, args...) #endif /* * RTEMS event used by interrupt handler to signal driver tasks. * This must not be any of the events used by the network task synchronization. */ #define INTERRUPT_EVENT RTEMS_EVENT_1 /* * remapping between PCI device and CPU memmory address view... */ #if defined(__i386) #define vtophys(p) (u_int32_t)(p) #else #define vtophys(p) vtophys(p) #endif #define NFXPDRIVER 1 static struct fxp_softc fxp_softc[NFXPDRIVER]; static int fxp_is_verbose = TRUE; /* * NOTE! On the Alpha, we have an alignment constraint. The * card DMAs the packet immediately following the RFA. However, * the first thing in the packet is a 14-byte Ethernet header. * This means that the packet is misaligned. To compensate, * we actually offset the RFA 2 bytes into the cluster. This * alignes the packet after the Ethernet header at a 32-bit * boundary. HOWEVER! This means that the RFA is misaligned! */ #define RFA_ALIGNMENT_FUDGE 2 /* * Set initial transmit threshold at 64 (512 bytes). This is * increased by 64 (512 bytes) at a time, to maximum of 192 * (1536 bytes), if an underrun occurs. */ static int tx_threshold = 64; /* * The configuration byte map has several undefined fields which * must be one or must be zero. Set up a template for these bits * only, (assuming a 82557 chip) leaving the actual configuration * to fxp_init. * * See struct fxp_cb_config for the bit definitions. */ static u_char fxp_cb_config_template[] = { 0x0, 0x0, /* cb_status */ 0x0, 0x0, /* cb_command */ 0x0, 0x0, 0x0, 0x0, /* link_addr */ 0x0, /* 0 */ 0x0, /* 1 */ 0x0, /* 2 */ 0x0, /* 3 */ 0x0, /* 4 */ 0x0, /* 5 */ 0x32, /* 6 */ 0x0, /* 7 */ 0x0, /* 8 */ 0x0, /* 9 */ 0x6, /* 10 */ 0x0, /* 11 */ 0x0, /* 12 */ 0x0, /* 13 */ 0xf2, /* 14 */ 0x48, /* 15 */ 0x0, /* 16 */ 0x40, /* 17 */ 0xf0, /* 18 */ 0x0, /* 19 */ 0x3f, /* 20 */ 0x5 /* 21 */ }; struct fxp_ident { u_int16_t devid; char *name; int warn; }; #define UNTESTED 1 /* * Claim various Intel PCI device identifiers for this driver. The * sub-vendor and sub-device field are extensively used to identify * particular variants, but we don't currently differentiate between * them. */ static struct fxp_ident fxp_ident_table[] = { { 0x1229, "Intel Pro 10/100B/100+ Ethernet", UNTESTED }, { 0x2449, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1209, "Intel Embedded 10/100 Ethernet", 0 }, { 0x1029, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1030, "Intel Pro/100 Ethernet", 0 }, { 0x1031, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1032, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1033, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1034, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1035, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1036, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1037, "Intel Pro/100 Ethernet", UNTESTED }, { 0x1038, "Intel Pro/100 Ethernet", UNTESTED }, { 0x103B, "Intel Pro/100 Ethernet (82801BD PRO/100 VM (LOM))", 0 }, { 0, NULL }, }; #if 0 static int fxp_probe(device_t dev); static int fxp_attach(device_t dev); static int fxp_detach(device_t dev); static int fxp_shutdown(device_t dev); #endif int fxp_output (struct ifnet *, struct mbuf *, struct sockaddr *, struct rtentry *); static rtems_isr fxp_intr(rtems_vector_number v); static void fxp_init(void *xsc); static void fxp_tick(void *xsc); static void fxp_start(struct ifnet *ifp); static void fxp_stop(struct fxp_softc *sc); static void fxp_release(struct fxp_softc *sc); static int fxp_ioctl(struct ifnet *ifp, int command, caddr_t data); static void fxp_watchdog(struct ifnet *ifp); static int fxp_add_rfabuf(struct fxp_softc *sc, struct mbuf *oldm); static void fxp_mc_setup(struct fxp_softc *sc); static u_int16_t fxp_eeprom_getword(struct fxp_softc *sc, int offset, int autosize); static void fxp_eeprom_putword(struct fxp_softc *sc, int offset, u_int16_t data); static void fxp_autosize_eeprom(struct fxp_softc *sc); static void fxp_read_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words); static void fxp_write_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words); #ifdef NOTUSED static int fxp_ifmedia_upd(struct ifnet *ifp); static void fxp_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr); static int fxp_serial_ifmedia_upd(struct ifnet *ifp); static void fxp_serial_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr); static volatile int fxp_miibus_readreg(device_t dev, int phy, int reg); static void fxp_miibus_writereg(device_t dev, int phy, int reg, int value); #endif static __inline void fxp_lwcopy(volatile u_int32_t *src, volatile u_int32_t *dst); static __inline void fxp_scb_wait(struct fxp_softc *sc); static __inline void fxp_scb_cmd(struct fxp_softc *sc, int cmd); static __inline void fxp_dma_wait(volatile u_int16_t *status, struct fxp_softc *sc); /* * Inline function to copy a 16-bit aligned 32-bit quantity. */ static __inline void fxp_lwcopy(volatile u_int32_t *src, volatile u_int32_t *dst) { #ifdef __i386__ *dst = *src; #else volatile u_int16_t *a = (volatile u_int16_t *)src; volatile u_int16_t *b = (volatile u_int16_t *)dst; b[0] = a[0]; b[1] = a[1]; #endif } /* * inline access functions to pci space registers */ static __inline u_int8_t fxp_csr_read_1(struct fxp_softc *sc,int reg) { u_int8_t val; if (sc->pci_regs_are_io) { inport_byte(sc->pci_regs_base + reg,val); } else { val = *(u_int8_t *)(sc->pci_regs_base+reg); } return val; } static __inline u_int32_t fxp_csr_read_2(struct fxp_softc *sc,int reg) { u_int16_t val; if (sc->pci_regs_are_io) { inport_word(sc->pci_regs_base + reg,val); } else { val = *(u_int16_t *)(sc->pci_regs_base+reg); } return val; } static __inline u_int32_t fxp_csr_read_4(struct fxp_softc *sc,int reg) { u_int32_t val; if (sc->pci_regs_are_io) { inport_long(sc->pci_regs_base + reg,val); } else { val = *(u_int32_t *)(sc->pci_regs_base+reg); } return val; } /* * Wait for the previous command to be accepted (but not necessarily * completed). */ static __inline void fxp_scb_wait(struct fxp_softc *sc) { int i = 10000; while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i) DELAY(2); if (i == 0) device_printf(sc->dev, "SCB timeout: 0x%x 0x%x 0x%x 0x%x\n", CSR_READ_1(sc, FXP_CSR_SCB_COMMAND), CSR_READ_1(sc, FXP_CSR_SCB_STATACK), CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS), CSR_READ_2(sc, FXP_CSR_FLOWCONTROL)); } static __inline void fxp_scb_cmd(struct fxp_softc *sc, int cmd) { if (cmd == FXP_SCB_COMMAND_CU_RESUME && sc->cu_resume_bug) { CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_CB_COMMAND_NOP); fxp_scb_wait(sc); } CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd); } static __inline void fxp_dma_wait(volatile u_int16_t *status, struct fxp_softc *sc) { int i = 10000; while (!(*status & FXP_CB_STATUS_C) && --i) DELAY(2); if (i == 0) device_printf(sc->dev, "DMA timeout\n"); } static __inline unsigned int pci_get_vendor(struct fxp_softc *sc) { u_int16_t vendor; pcib_conf_read16(sc->pci_signature,0,&vendor); return vendor; } static __inline unsigned int pci_get_device(struct fxp_softc *sc) { u_int16_t device; pcib_conf_read16(sc->pci_signature,2,&device); return device; } static __inline unsigned int pci_get_subvendor(struct fxp_softc *sc) { u_int16_t subvendor; pcib_conf_read16(sc->pci_signature,0x2c,&subvendor); return subvendor; } static __inline unsigned int pci_get_subdevice(struct fxp_softc *sc) { u_int16_t subdevice; pcib_conf_read16(sc->pci_signature,0x2e,&subdevice); return subdevice; } static __inline unsigned int pci_get_revid(struct fxp_softc *sc) { u_int8_t revid; pcib_conf_read8(sc->pci_signature,0x08,&revid); return revid; } static void nopOn(const rtems_irq_connect_data* notUsed) { /* * code should be moved from fxp_Enet_initialize_hardware * to this location */ } static int fxpIsOn(const rtems_irq_connect_data* irq) { return BSP_irq_enabled_at_i8259s (irq->name); } int rtems_fxp_attach(struct rtems_bsdnet_ifconfig *config, int attaching) { int error = 0; struct fxp_softc *sc; struct ifnet *ifp; u_int16_t val16; u_int32_t val32; u_int16_t data; int i; int s; int unitNumber; char *unitName; u_int16_t dev_id; u_int8_t interrupt; int mtu; /* * Set up some timing values */ rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &fxp_ticksPerSecond); DBGLVL_PRINTK(1,"fxp_attach called\n"); /* * Parse driver name */ if ((unitNumber = rtems_bsdnet_parse_driver_name (config, &unitName)) < 0) return 0; /* * Is driver free? */ if ((unitNumber <= 0) || (unitNumber > NFXPDRIVER)) { device_printf(dev,"Bad FXP unit number.\n"); return 0; } sc = &fxp_softc[unitNumber - 1]; ifp = &sc->arpcom.ac_if; if (ifp->if_softc != NULL) { device_printf(dev,"FXP Driver already in use.\n"); return 0; } bzero(sc, sizeof(*sc)); #ifdef NOTUSED sc->dev = dev; callout_handle_init(&sc->stat_ch); mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_DEF | MTX_RECURSE); #endif s = splimp(); /* * init PCI Bios interface... */ i = pcib_init(); DBGLVL_PRINTK(2,"fxp_attach: pcib_init returned %d\n",i); if (i != PCIB_ERR_SUCCESS) { device_printf(dev, "could not initialize pci bios interface\n"); return 0; } /* * find device on pci bus */ { int j; for (j=0; fxp_ident_table[j].devid; j++ ) { i = pcib_find_by_devid( 0x8086, fxp_ident_table[j].devid, unitNumber-1, &(sc->pci_signature)); DBGLVL_PRINTK(2,"fxp_attach: find_devid returned %d " "and pci signature 0x%x\n", i,sc->pci_signature); if (PCIB_ERR_SUCCESS == i) { if ( UNTESTED == fxp_ident_table[j].warn ) { device_printf(dev,"WARNING: this chip version has NOT been reported to work under RTEMS yet.\n"); device_printf(dev," If it works OK, report it as tested in 'c/src/libchip/network/if_fxp.c'\n"); } break; } } } /* * FIXME: add search for more device types... */ if (i != PCIB_ERR_SUCCESS) { device_printf(dev, "could not find 82559ER device\n"); return 0; } /* * Enable bus mastering. Enable memory space too, in case * BIOS/Prom forgot about it. */ pcib_conf_read16(sc->pci_signature, PCI_COMMAND,&val16); val16 |= (PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER); pcib_conf_write16(sc->pci_signature, PCI_COMMAND, val16); DBGLVL_PRINTK(3,"fxp_attach: PCI_COMMAND_write = 0x%x\n",val16); pcib_conf_read16(sc->pci_signature, PCI_COMMAND,&val16); DBGLVL_PRINTK(4,"fxp_attach: PCI_COMMAND_read = 0x%x\n",val16); /* * Figure out which we should try first - memory mapping or i/o mapping? * We default to memory mapping. Then we accept an override from the * command line. Then we check to see which one is enabled. */ #ifdef NOTUSED m1 = PCI_COMMAND_MEMORY; m2 = PCI_COMMAND_IO; prefer_iomap = 0; if (resource_int_value(device_get_name(dev), device_get_unit(dev), "prefer_iomap", &prefer_iomap) == 0 && prefer_iomap != 0) { m1 = PCI_COMMAND_IO; m2 = PCI_COMMAND_MEMORY; } if (val & m1) { sc->rtp = ((m1 == PCI_COMMAND_MEMORY) ? SYS_RES_MEMORY : SYS_RES_IOPORT); sc->rgd = ((m1 == PCI_COMMAND_MEMORY) ? FXP_PCI_MMBA : FXP_PCI_IOBA); sc->mem = bus_alloc_resource(dev, sc->rtp, &sc->rgd, 0, ~0, 1, RF_ACTIVE); } if (sc->mem == NULL && (val & m2)) { sc->rtp = ((m2 == PCI_COMMAND_MEMORY) ? SYS_RES_MEMORY : SYS_RES_IOPORT); sc->rgd = ((m2 == PCI_COMMAND_MEMORY) ? FXP_PCI_MMBA : FXP_PCI_IOBA); sc->mem = bus_alloc_resource(dev, sc->rtp, &sc->rgd, 0, ~0, 1, RF_ACTIVE); } if (!sc->mem) { device_printf(dev, "could not map device registers\n"); error = ENXIO; goto fail; } if (fxp_is_verbose) { device_printf(dev, "using %s space register mapping\n", sc->rtp == SYS_RES_MEMORY? "memory" : "I/O"); } sc->sc_st = rman_get_bustag(sc->mem); sc->sc_sh = rman_get_bushandle(sc->mem); /* * Allocate our interrupt. */ rid = 0; sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (sc->irq == NULL) { device_printf(dev, "could not map interrupt\n"); error = ENXIO; goto fail; } error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, fxp_intr, sc, &sc->ih); if (error) { device_printf(dev, "could not setup irq\n"); goto fail; } #endif /* * get mapping and base address of registers */ pcib_conf_read16(sc->pci_signature, PCI_COMMAND,&val16); DBGLVL_PRINTK(4,"fxp_attach: PCI_COMMAND_read = 0x%x\n",val16); if((val16 & PCI_COMMAND_IO) != 0) { sc->pci_regs_are_io = TRUE; pcib_conf_read32(sc->pci_signature, PCI_BASE_ADDRESS_1, &val32); sc->pci_regs_base = val32 & PCI_BASE_ADDRESS_IO_MASK; } else { sc->pci_regs_are_io = FALSE; pcib_conf_read32(sc->pci_signature, PCI_BASE_ADDRESS_0, &val32); sc->pci_regs_base = val32 & PCI_BASE_ADDRESS_MEM_MASK; } DBGLVL_PRINTK(3,"fxp_attach: CSR registers are mapped in %s space" " at address 0x%x\n", sc->pci_regs_are_io ? "I/O" : "MEM", sc->pci_regs_base); /* * get interrupt level to be used */ pcib_conf_read8(sc->pci_signature, 60, &interrupt); DBGLVL_PRINTK(3,"fxp_attach: interrupt = 0x%x\n",interrupt); sc->irqInfo.name = (rtems_irq_symbolic_name)interrupt; /* * Set up interrupts */ sc->irqInfo.hdl = (rtems_irq_hdl)fxp_intr; sc->irqInfo.on = nopOn; sc->irqInfo.off = nopOn; sc->irqInfo.isOn = fxpIsOn; s = BSP_install_rtems_irq_handler (&sc->irqInfo); if (!s) rtems_panic ("Can't attach fxp interrupt handler for irq %d\n", sc->irqInfo.name); /* * Reset to a stable state. CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); */ CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET); DELAY(10); sc->cbl_base = malloc(sizeof(struct fxp_cb_tx) * FXP_NTXCB, M_DEVBUF, M_NOWAIT); DBGLVL_PRINTK(3,"fxp_attach: sc->cbl_base = 0x%x\n",sc->cbl_base); if (sc->cbl_base == NULL) goto failmem; else bzero(sc->cbl_base,sizeof(struct fxp_cb_tx) * FXP_NTXCB); sc->fxp_stats = malloc(sizeof(struct fxp_stats), M_DEVBUF, M_NOWAIT); DBGLVL_PRINTK(3,"fxp_attach: sc->fxp_stats = 0x%x\n",sc->fxp_stats); if (sc->fxp_stats == NULL) goto failmem; else bzero(sc->fxp_stats,sizeof(struct fxp_stats)); sc->mcsp = malloc(sizeof(struct fxp_cb_mcs), M_DEVBUF, M_NOWAIT); DBGLVL_PRINTK(3,"fxp_attach: sc->mcsp = 0x%x\n",sc->mcsp); if (sc->mcsp == NULL) goto failmem; /* * Pre-allocate our receive buffers. */ for (i = 0; i < FXP_NRFABUFS; i++) { if (fxp_add_rfabuf(sc, NULL) != 0) { goto failmem; } } /* * Find out how large of an SEEPROM we have. */ DBGLVL_PRINTK(3,"fxp_attach: calling fxp_autosize_eeprom\n"); fxp_autosize_eeprom(sc); /* * Determine whether we must use the 503 serial interface. */ fxp_read_eeprom(sc, &data, 6, 1); if ((data & FXP_PHY_DEVICE_MASK) != 0 && (data & FXP_PHY_SERIAL_ONLY)) sc->flags |= FXP_FLAG_SERIAL_MEDIA; /* * Find out the basic controller type; we currently only * differentiate between a 82557 and greater. */ fxp_read_eeprom(sc, &data, 5, 1); if ((data >> 8) == 1) sc->chip = FXP_CHIP_82557; DBGLVL_PRINTK(3,"fxp_attach: sc->chip = %d\n",sc->chip); /* * Enable workarounds for certain chip revision deficiencies. * * Systems based on the ICH2/ICH2-M chip from Intel have a defect * where the chip can cause a PCI protocol violation if it receives * a CU_RESUME command when it is entering the IDLE state. The * workaround is to disable Dynamic Standby Mode, so the chip never * deasserts CLKRUN#, and always remains in an active state. * * See Intel 82801BA/82801BAM Specification Update, Errata #30. */ #ifdef NOTUSED i = pci_get_device(dev); #else pcib_conf_read16(sc->pci_signature,2,&dev_id); DBGLVL_PRINTK(3,"fxp_attach: device id = 0x%x\n",dev_id); #endif if (dev_id == 0x2449 || (dev_id > 0x1030 && dev_id < 0x1039)) { device_printf(dev, "*** See Intel 82801BA/82801BAM Specification Update, Errata #30. ***\n"); fxp_read_eeprom(sc, &data, 10, 1); if (data & 0x02) { /* STB enable */ u_int16_t cksum; int i; device_printf(dev, "*** DISABLING DYNAMIC STANDBY MODE IN EEPROM ***\n"); data &= ~0x02; fxp_write_eeprom(sc, &data, 10, 1); device_printf(dev, "New EEPROM ID: 0x%x\n", data); cksum = 0; for (i = 0; i < (1 << sc->eeprom_size) - 1; i++) { fxp_read_eeprom(sc, &data, i, 1); cksum += data; } i = (1 << sc->eeprom_size) - 1; cksum = 0xBABA - cksum; fxp_read_eeprom(sc, &data, i, 1); fxp_write_eeprom(sc, &cksum, i, 1); device_printf(dev, "EEPROM checksum @ 0x%x: 0x%x -> 0x%x\n", i, data, cksum); /* * We need to do a full PCI reset here. A software * reset to the port doesn't cut it, but let's try * anyway. */ CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET); DELAY(50); device_printf(dev, "*** PLEASE REBOOT THE SYSTEM NOW FOR CORRECT OPERATION ***\n"); #if 1 /* * If the user elects to continue, try the software * workaround, as it is better than nothing. */ sc->flags |= FXP_FLAG_CU_RESUME_BUG; #endif } } /* * If we are not a 82557 chip, we can enable extended features. */ if (sc->chip != FXP_CHIP_82557) { u_int8_t tmp_val; /* * If MWI is enabled in the PCI configuration, and there * is a valid cacheline size (8 or 16 dwords), then tell * the board to turn on MWI. */ pcib_conf_read8(sc->pci_signature, PCI_CACHE_LINE_SIZE,&tmp_val); DBGLVL_PRINTK(3,"fxp_attach: CACHE_LINE_SIZE = %d\n",tmp_val); if (val16 & PCI_COMMAND_MEMORY && tmp_val != 0) sc->flags |= FXP_FLAG_MWI_ENABLE; /* turn on the extended TxCB feature */ sc->flags |= FXP_FLAG_EXT_TXCB; /* enable reception of long frames for VLAN */ sc->flags |= FXP_FLAG_LONG_PKT_EN; DBGLVL_PRINTK(3,"fxp_attach: sc->flags = 0x%x\n", sc->flags); } /* * Read MAC address. */ fxp_read_eeprom(sc, (u_int16_t *)sc->arpcom.ac_enaddr, 0, 3); if (fxp_is_verbose) { device_printf(dev, "Ethernet address %x:%x:%x:%x:%x:%x %s \n", ((u_int8_t *)sc->arpcom.ac_enaddr)[0], ((u_int8_t *)sc->arpcom.ac_enaddr)[1], ((u_int8_t *)sc->arpcom.ac_enaddr)[2], ((u_int8_t *)sc->arpcom.ac_enaddr)[3], ((u_int8_t *)sc->arpcom.ac_enaddr)[4], ((u_int8_t *)sc->arpcom.ac_enaddr)[5], sc->flags & FXP_FLAG_SERIAL_MEDIA ? ", 10Mbps" : ""); device_printf(dev, "PCI IDs: 0x%x 0x%x 0x%x 0x%x 0x%x\n", pci_get_vendor(sc), pci_get_device(sc), pci_get_subvendor(sc), pci_get_subdevice(sc), pci_get_revid(sc)); device_printf(dev, "Chip Type: %d\n", sc->chip); } #ifdef NOTUSED /* do not set up interface at all... */ /* * If this is only a 10Mbps device, then there is no MII, and * the PHY will use a serial interface instead. * * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter * doesn't have a programming interface of any sort. The * media is sensed automatically based on how the link partner * is configured. This is, in essence, manual configuration. */ if (sc->flags & FXP_FLAG_SERIAL_MEDIA) { ifmedia_init(&sc->sc_media, 0, fxp_serial_ifmedia_upd, fxp_serial_ifmedia_sts); ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL); ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL); } else { if (mii_phy_probe(dev, &sc->miibus, fxp_ifmedia_upd, fxp_ifmedia_sts)) { device_printf(dev, "MII without any PHY!\n"); error = ENXIO; goto fail; } } #endif if (config->mtu) mtu = config->mtu; else mtu = ETHERMTU; ifp->if_softc = sc; ifp->if_unit = unitNumber; ifp->if_name = unitName; ifp->if_mtu = mtu; ifp->if_baudrate = 100000000; ifp->if_init = fxp_init; ifp->if_ioctl = fxp_ioctl; ifp->if_start = fxp_start; ifp->if_output = ether_output; ifp->if_watchdog = fxp_watchdog; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX /*| IFF_MULTICAST*/; if (ifp->if_snd.ifq_maxlen == 0) ifp->if_snd.ifq_maxlen = ifqmaxlen; /* * Attach the interface. */ DBGLVL_PRINTK(3,"fxp_attach: calling if_attach\n"); if_attach (ifp); DBGLVL_PRINTK(3,"fxp_attach: calling ether_if_attach\n"); ether_ifattach(ifp); DBGLVL_PRINTK(3,"fxp_attach: return from ether_if_attach\n"); #ifdef NOTUSED /* * Tell the upper layer(s) we support long frames. */ ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); #endif /* * Let the system queue as many packets as we have available * TX descriptors. */ ifp->if_snd.ifq_maxlen = FXP_NTXCB - 1; splx(s); return (0); failmem: device_printf(dev, "Failed to malloc memory\n"); error = ENOMEM; #ifdef NOTUSED fail: #endif splx(s); fxp_release(sc); return (error); } /* * release all resources */ static void fxp_release(struct fxp_softc *sc) { #ifdef NOTUSED bus_generic_detach(sc->dev); if (sc->miibus) device_delete_child(sc->dev, sc->miibus); #endif if (sc->cbl_base) free(sc->cbl_base, M_DEVBUF); if (sc->fxp_stats) free(sc->fxp_stats, M_DEVBUF); if (sc->mcsp) free(sc->mcsp, M_DEVBUF); if (sc->rfa_headm) m_freem(sc->rfa_headm); #ifdef NOTUSED if (sc->ih) bus_teardown_intr(sc->dev, sc->irq, sc->ih); if (sc->irq) bus_release_resource(sc->dev, SYS_RES_IRQ, 0, sc->irq); if (sc->mem) bus_release_resource(sc->dev, sc->rtp, sc->rgd, sc->mem); mtx_destroy(&sc->sc_mtx); #endif } #if NOTUSED /* * Detach interface. */ static int fxp_detach(device_t dev) { struct fxp_softc *sc = device_get_softc(dev); int s; /* disable interrupts */ CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE); s = splimp(); /* * Stop DMA and drop transmit queue. */ fxp_stop(sc); /* * Close down routes etc. */ ether_ifdetach(&sc->arpcom.ac_if, ETHER_BPF_SUPPORTED); /* * Free all media structures. */ ifmedia_removeall(&sc->sc_media); splx(s); /* Release our allocated resources. */ fxp_release(sc); return (0); } /* * Device shutdown routine. Called at system shutdown after sync. The * main purpose of this routine is to shut off receiver DMA so that * kernel memory doesn't get clobbered during warmboot. */ static int fxp_shutdown(device_t dev) { /* * Make sure that DMA is disabled prior to reboot. Not doing * do could allow DMA to corrupt kernel memory during the * reboot before the driver initializes. */ fxp_stop((struct fxp_softc *) device_get_softc(dev)); return (0); } #endif /* * Show interface statistics */ static void fxp_stats(struct fxp_softc *sc) { struct ifnet *ifp = &sc->sc_if; printf (" Output packets:%-8lu", ifp->if_opackets); printf (" Collisions:%-8lu", ifp->if_collisions); printf (" Output errors:%-8lu\n", ifp->if_oerrors); printf (" Input packets:%-8lu", ifp->if_ipackets); printf (" Input errors:%-8lu\n", ifp->if_ierrors); } static void fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int length) { u_int16_t reg; int x; /* * Shift in data. */ for (x = 1 << (length - 1); x; x >>= 1) { if (data & x) reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; else reg = FXP_EEPROM_EECS; CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); DELAY(1); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK); DELAY(1); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); DELAY(1); } } /* * Read from the serial EEPROM. Basically, you manually shift in * the read opcode (one bit at a time) and then shift in the address, * and then you shift out the data (all of this one bit at a time). * The word size is 16 bits, so you have to provide the address for * every 16 bits of data. */ static u_int16_t fxp_eeprom_getword(struct fxp_softc *sc, int offset, int autosize) { u_int16_t reg, data; int x; CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); /* * Shift in read opcode. */ fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); /* * Shift in address. */ data = 0; for (x = 1 << (sc->eeprom_size - 1); x; x >>= 1) { if (offset & x) reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; else reg = FXP_EEPROM_EECS; CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); DELAY(1); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK); DELAY(1); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); DELAY(1); reg = CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO; data++; if (autosize && reg == 0) { sc->eeprom_size = data; break; } } /* * Shift out data. */ data = 0; reg = FXP_EEPROM_EECS; for (x = 1 << 15; x; x >>= 1) { CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK); DELAY(1); if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO) data |= x; CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); DELAY(1); } CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); DELAY(1); return (data); } static void fxp_eeprom_putword(struct fxp_softc *sc, int offset, u_int16_t data) { int i; /* * Erase/write enable. */ CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); fxp_eeprom_shiftin(sc, 0x4, 3); fxp_eeprom_shiftin(sc, 0x03 << (sc->eeprom_size - 2), sc->eeprom_size); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); DELAY(1); /* * Shift in write opcode, address, data. */ CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3); fxp_eeprom_shiftin(sc, offset, sc->eeprom_size); fxp_eeprom_shiftin(sc, data, 16); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); DELAY(1); /* * Wait for EEPROM to finish up. */ CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); DELAY(1); for (i = 0; i < 1000; i++) { if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO) break; DELAY(50); } CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); DELAY(1); /* * Erase/write disable. */ CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); fxp_eeprom_shiftin(sc, 0x4, 3); fxp_eeprom_shiftin(sc, 0, sc->eeprom_size); CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); DELAY(1); } /* * From NetBSD: * * Figure out EEPROM size. * * 559's can have either 64-word or 256-word EEPROMs, the 558 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet * talks about the existance of 16 to 256 word EEPROMs. * * The only known sizes are 64 and 256, where the 256 version is used * by CardBus cards to store CIS information. * * The address is shifted in msb-to-lsb, and after the last * address-bit the EEPROM is supposed to output a `dummy zero' bit, * after which follows the actual data. We try to detect this zero, by * probing the data-out bit in the EEPROM control register just after * having shifted in a bit. If the bit is zero, we assume we've * shifted enough address bits. The data-out should be tri-state, * before this, which should translate to a logical one. */ static void fxp_autosize_eeprom(struct fxp_softc *sc) { /* guess maximum size of 256 words */ sc->eeprom_size = 8; /* autosize */ (void) fxp_eeprom_getword(sc, 0, 1); } static void fxp_read_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words) { int i; for (i = 0; i < words; i++) { data[i] = fxp_eeprom_getword(sc, offset + i, 0); DBGLVL_PRINTK(4,"fxp_eeprom_read(off=0x%x)=0x%x\n", offset+i,data[i]); } } static void fxp_write_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words) { int i; for (i = 0; i < words; i++) fxp_eeprom_putword(sc, offset + i, data[i]); DBGLVL_PRINTK(4,"fxp_eeprom_write(off=0x%x,0x%x)\n", offset+i,data[i]); } /* * Start packet transmission on the interface. */ static void fxp_start(struct ifnet *ifp) { struct fxp_softc *sc = ifp->if_softc; struct fxp_cb_tx *txp; DBGLVL_PRINTK(3,"fxp_start called\n"); /* * See if we need to suspend xmit until the multicast filter * has been reprogrammed (which can only be done at the head * of the command chain). */ if (sc->need_mcsetup) { return; } txp = NULL; /* * We're finished if there is nothing more to add to the list or if * we're all filled up with buffers to transmit. * NOTE: One TxCB is reserved to guarantee that fxp_mc_setup() can add * a NOP command when needed. */ while (ifp->if_snd.ifq_head != NULL && sc->tx_queued < FXP_NTXCB - 1) { struct mbuf *m, *mb_head; int segment; /* * Grab a packet to transmit. */ IF_DEQUEUE(&ifp->if_snd, mb_head); /* * Get pointer to next available tx desc. */ txp = sc->cbl_last->next; /* * Go through each of the mbufs in the chain and initialize * the transmit buffer descriptors with the physical address * and size of the mbuf. */ tbdinit: for (m = mb_head, segment = 0; m != NULL; m = m->m_next) { if (m->m_len != 0) { if (segment == FXP_NTXSEG) break; txp->tbd[segment].tb_addr = vtophys(mtod(m, vm_offset_t)); txp->tbd[segment].tb_size = m->m_len; segment++; } } if (m != NULL) { struct mbuf *mn; /* * We ran out of segments. We have to recopy this * mbuf chain first. Bail out if we can't get the * new buffers. */ MGETHDR(mn, M_DONTWAIT, MT_DATA); if (mn == NULL) { m_freem(mb_head); break; } if (mb_head->m_pkthdr.len > MHLEN) { MCLGET(mn, M_DONTWAIT); if ((mn->m_flags & M_EXT) == 0) { m_freem(mn); m_freem(mb_head); break; } } m_copydata(mb_head, 0, mb_head->m_pkthdr.len, mtod(mn, caddr_t)); mn->m_pkthdr.len = mn->m_len = mb_head->m_pkthdr.len; m_freem(mb_head); mb_head = mn; goto tbdinit; } txp->tbd_number = segment; txp->mb_head = mb_head; txp->cb_status = 0; if (sc->tx_queued != FXP_CXINT_THRESH - 1) { txp->cb_command = FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF | FXP_CB_COMMAND_S; } else { txp->cb_command = FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF | FXP_CB_COMMAND_S | FXP_CB_COMMAND_I; /* * Set a 5 second timer just in case we don't hear * from the card again. */ ifp->if_timer = 5; } txp->tx_threshold = tx_threshold; /* * Advance the end of list forward. */ #ifdef __alpha__ /* * On platforms which can't access memory in 16-bit * granularities, we must prevent the card from DMA'ing * up the status while we update the command field. * This could cause us to overwrite the completion status. */ atomic_clear_short(&sc->cbl_last->cb_command, FXP_CB_COMMAND_S); #else sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S; #endif /*__alpha__*/ sc->cbl_last = txp; /* * Advance the beginning of the list forward if there are * no other packets queued (when nothing is queued, cbl_first * sits on the last TxCB that was sent out). */ if (sc->tx_queued == 0) sc->cbl_first = txp; sc->tx_queued++; #ifdef NOTUSED /* * Pass packet to bpf if there is a listener. */ if (ifp->if_bpf) bpf_mtap(ifp, mb_head); #endif } /* * We're finished. If we added to the list, issue a RESUME to get DMA * going again if suspended. */ if (txp != NULL) { fxp_scb_wait(sc); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); } } /* * Process interface interrupts. */ static rtems_isr fxp_intr(rtems_vector_number v) { /* * FIXME: currently only works with one interface... */ struct fxp_softc *sc = &(fxp_softc[0]); /* * disable interrupts */ CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE); /* * send event to deamon */ rtems_event_send (sc->daemonTid, INTERRUPT_EVENT); } static void fxp_daemon(void *xsc) { struct fxp_softc *sc = xsc; struct ifnet *ifp = &sc->sc_if; u_int8_t statack; rtems_event_set events; rtems_interrupt_level level; #ifdef NOTUSED if (sc->suspended) { return; } #endif for (;;) { DBGLVL_PRINTK(4,"fxp_daemon waiting for event\n"); /* * wait for event to receive from interrupt function */ rtems_bsdnet_event_receive (INTERRUPT_EVENT, RTEMS_WAIT|RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &events); while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) { DBGLVL_PRINTK(4,"fxp_daemon: processing event, statack = 0x%x\n", statack); #ifdef NOTUSED /* * It should not be possible to have all bits set; the * FXP_SCB_INTR_SWI bit always returns 0 on a read. If * all bits are set, this may indicate that the card has * been physically ejected, so ignore it. */ if (statack == 0xff) return; #endif /* * First ACK all the interrupts in this pass. */ CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); /* * Free any finished transmit mbuf chains. * * Handle the CNA event likt a CXTNO event. It used to * be that this event (control unit not ready) was not * encountered, but it is now with the SMPng modifications. * The exact sequence of events that occur when the interface * is brought up are different now, and if this event * goes unhandled, the configuration/rxfilter setup sequence * can stall for several seconds. The result is that no * packets go out onto the wire for about 5 to 10 seconds * after the interface is ifconfig'ed for the first time. */ if (statack & (FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA)) { struct fxp_cb_tx *txp; for (txp = sc->cbl_first; sc->tx_queued && (txp->cb_status & FXP_CB_STATUS_C) != 0; txp = txp->next) { if (txp->mb_head != NULL) { m_freem(txp->mb_head); txp->mb_head = NULL; } sc->tx_queued--; } sc->cbl_first = txp; ifp->if_timer = 0; if (sc->tx_queued == 0) { if (sc->need_mcsetup) fxp_mc_setup(sc); } /* * Try to start more packets transmitting. */ if (ifp->if_snd.ifq_head != NULL) fxp_start(ifp); } /* * Process receiver interrupts. If a no-resource (RNR) * condition exists, get whatever packets we can and * re-start the receiver. */ if (statack & (FXP_SCB_STATACK_FR | FXP_SCB_STATACK_RNR)) { struct mbuf *m; struct fxp_rfa *rfa; rcvloop: m = sc->rfa_headm; rfa = (struct fxp_rfa *)(m->m_ext.ext_buf + RFA_ALIGNMENT_FUDGE); if (rfa->rfa_status & FXP_RFA_STATUS_C) { /* * Remove first packet from the chain. */ sc->rfa_headm = m->m_next; m->m_next = NULL; /* * Add a new buffer to the receive chain. * If this fails, the old buffer is recycled * instead. */ if (fxp_add_rfabuf(sc, m) == 0) { struct ether_header *eh; int total_len; total_len = rfa->actual_size & (MCLBYTES - 1); if (total_len < sizeof(struct ether_header)) { m_freem(m); goto rcvloop; } /* * Drop the packet if it has CRC * errors. This test is only needed * when doing 802.1q VLAN on the 82557 * chip. */ if (rfa->rfa_status & FXP_RFA_STATUS_CRC) { m_freem(m); goto rcvloop; } m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = total_len; eh = mtod(m, struct ether_header *); m->m_data += sizeof(struct ether_header); m->m_len -= sizeof(struct ether_header); m->m_pkthdr.len = m->m_len; ether_input(ifp, eh, m); } goto rcvloop; } if (statack & FXP_SCB_STATACK_RNR) { fxp_scb_wait(sc); CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(sc->rfa_headm->m_ext.ext_buf) + RFA_ALIGNMENT_FUDGE); fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); } } } /* * reenable interrupts */ rtems_interrupt_disable (level); CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL,0); rtems_interrupt_enable (level); } } /* * Update packet in/out/collision statistics. The i82557 doesn't * allow you to access these counters without doing a fairly * expensive DMA to get _all_ of the statistics it maintains, so * we do this operation here only once per second. The statistics * counters in the kernel are updated from the previous dump-stats * DMA and then a new dump-stats DMA is started. The on-chip * counters are zeroed when the DMA completes. If we can't start * the DMA immediately, we don't wait - we just prepare to read * them again next time. */ static void fxp_tick(void *xsc) { struct fxp_softc *sc = xsc; struct ifnet *ifp = &sc->sc_if; struct fxp_stats *sp = sc->fxp_stats; struct fxp_cb_tx *txp; int s; DBGLVL_PRINTK(4,"fxp_tick called\n"); ifp->if_opackets += sp->tx_good; ifp->if_collisions += sp->tx_total_collisions; if (sp->rx_good) { ifp->if_ipackets += sp->rx_good; sc->rx_idle_secs = 0; } else { /* * Receiver's been idle for another second. */ sc->rx_idle_secs++; } ifp->if_ierrors += sp->rx_crc_errors + sp->rx_alignment_errors + sp->rx_rnr_errors + sp->rx_overrun_errors; /* * If any transmit underruns occured, bump up the transmit * threshold by another 512 bytes (64 * 8). */ if (sp->tx_underruns) { ifp->if_oerrors += sp->tx_underruns; if (tx_threshold < 192) tx_threshold += 64; } s = splimp(); /* * Release any xmit buffers that have completed DMA. This isn't * strictly necessary to do here, but it's advantagous for mbufs * with external storage to be released in a timely manner rather * than being defered for a potentially long time. This limits * the delay to a maximum of one second. */ for (txp = sc->cbl_first; sc->tx_queued && (txp->cb_status & FXP_CB_STATUS_C) != 0; txp = txp->next) { if (txp->mb_head != NULL) { m_freem(txp->mb_head); txp->mb_head = NULL; } sc->tx_queued--; } sc->cbl_first = txp; /* * If we haven't received any packets in FXP_MAC_RX_IDLE seconds, * then assume the receiver has locked up and attempt to clear * the condition by reprogramming the multicast filter. This is * a work-around for a bug in the 82557 where the receiver locks * up if it gets certain types of garbage in the syncronization * bits prior to the packet header. This bug is supposed to only * occur in 10Mbps mode, but has been seen to occur in 100Mbps * mode as well (perhaps due to a 10/100 speed transition). */ if (sc->rx_idle_secs > FXP_MAX_RX_IDLE) { sc->rx_idle_secs = 0; fxp_mc_setup(sc); } /* * If there is no pending command, start another stats * dump. Otherwise punt for now. */ if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) { /* * Start another stats dump. */ fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET); } else { /* * A previous command is still waiting to be accepted. * Just zero our copy of the stats and wait for the * next timer event to update them. */ sp->tx_good = 0; sp->tx_underruns = 0; sp->tx_total_collisions = 0; sp->rx_good = 0; sp->rx_crc_errors = 0; sp->rx_alignment_errors = 0; sp->rx_rnr_errors = 0; sp->rx_overrun_errors = 0; } #ifdef NOTUSED if (sc->miibus != NULL) mii_tick(device_get_softc(sc->miibus)); #endif splx(s); /* * Schedule another timeout one second from now. */ if (sc->stat_ch == fxp_timeout_running) { timeout(fxp_tick, sc, hz); } else if (sc->stat_ch == fxp_timeout_stop_rq) { sc->stat_ch = fxp_timeout_stopped; } } /* * Stop the interface. Cancels the statistics updater and resets * the interface. */ static void fxp_stop(struct fxp_softc *sc) { struct ifnet *ifp = &sc->sc_if; struct fxp_cb_tx *txp; int i; DBGLVL_PRINTK(2,"fxp_stop called\n"); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; /* * stop stats updater. */ if (sc->stat_ch == fxp_timeout_running) { DBGLVL_PRINTK(3,"fxp_stop: trying to stop stat update tick\n"); sc->stat_ch = fxp_timeout_stop_rq; while(sc->stat_ch != fxp_timeout_stopped) { rtems_bsdnet_semaphore_release(); rtems_task_wake_after(fxp_ticksPerSecond); rtems_bsdnet_semaphore_obtain(); } DBGLVL_PRINTK(3,"fxp_stop: stat update tick stopped\n"); } /* * Issue software reset */ DBGLVL_PRINTK(3,"fxp_stop: issue software reset\n"); CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); DELAY(10); /* * Release any xmit buffers. */ DBGLVL_PRINTK(3,"fxp_stop: releasing xmit buffers\n"); txp = sc->cbl_base; if (txp != NULL) { for (i = 0; i < FXP_NTXCB; i++) { if (txp[i].mb_head != NULL) { m_freem(txp[i].mb_head); txp[i].mb_head = NULL; } } } sc->tx_queued = 0; /* * Free all the receive buffers then reallocate/reinitialize */ DBGLVL_PRINTK(3,"fxp_stop: free and reinit all receive buffers\n"); if (sc->rfa_headm != NULL) m_freem(sc->rfa_headm); sc->rfa_headm = NULL; sc->rfa_tailm = NULL; for (i = 0; i < FXP_NRFABUFS; i++) { if (fxp_add_rfabuf(sc, NULL) != 0) { /* * This "can't happen" - we're at splimp() * and we just freed all the buffers we need * above. */ panic("fxp_stop: no buffers!"); } } DBGLVL_PRINTK(2,"fxp_stop: finished\n"); } /* * Watchdog/transmission transmit timeout handler. Called when a * transmission is started on the interface, but no interrupt is * received before the timeout. This usually indicates that the * card has wedged for some reason. */ static void fxp_watchdog(struct ifnet *ifp) { struct fxp_softc *sc = ifp->if_softc; device_printf(sc->dev, "device timeout\n"); ifp->if_oerrors++; fxp_init(sc); } static void fxp_init(void *xsc) { struct fxp_softc *sc = xsc; struct ifnet *ifp = &sc->sc_if; struct fxp_cb_config *cbp; struct fxp_cb_ias *cb_ias; struct fxp_cb_tx *txp; int i, prm, s; rtems_task_wake_after(100); DBGLVL_PRINTK(2,"fxp_init called\n"); s = splimp(); /* * Cancel any pending I/O */ /* * Add line suggested by "Eugene Denisov" * on Tue, 16 Mar 2004 13:10:15 +0300 */ sc->stat_ch = fxp_timeout_stopped; fxp_stop(sc); prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; DBGLVL_PRINTK(5,"fxp_init: Initializing base of CBL and RFA memory\n"); /* * Initialize base of CBL and RFA memory. Loading with zero * sets it up for regular linear addressing. */ CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE); fxp_scb_wait(sc); fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE); /* * Initialize base of dump-stats buffer. */ DBGLVL_PRINTK(5,"fxp_init: Initializing base of dump-stats buffer\n"); fxp_scb_wait(sc); CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(sc->fxp_stats)); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR); /* * We temporarily use memory that contains the TxCB list to * construct the config CB. The TxCB list memory is rebuilt * later. */ cbp = (struct fxp_cb_config *) sc->cbl_base; DBGLVL_PRINTK(5,"fxp_init: cbp = 0x%x\n",cbp); /* * This bcopy is kind of disgusting, but there are a bunch of must be * zero and must be one bits in this structure and this is the easiest * way to initialize them all to proper values. */ bcopy(fxp_cb_config_template, (void *)(u_int32_t *)(volatile void *)&cbp->cb_status, sizeof(fxp_cb_config_template)); cbp->cb_status = 0; cbp->cb_command = FXP_CB_COMMAND_CONFIG | FXP_CB_COMMAND_EL; cbp->link_addr = -1; /* (no) next command */ cbp->byte_count = 22; /* (22) bytes to config */ cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */ cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */ cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ cbp->mwi_enable = sc->flags & FXP_FLAG_MWI_ENABLE ? 1 : 0; cbp->type_enable = 0; /* actually reserved */ cbp->read_align_en = sc->flags & FXP_FLAG_READ_ALIGN ? 1 : 0; cbp->end_wr_on_cl = sc->flags & FXP_FLAG_WRITE_ALIGN ? 1 : 0; cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */ cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */ cbp->dma_mbce = 0; /* (disable) dma max counters */ cbp->late_scb = 0; /* (don't) defer SCB update */ cbp->direct_dma_dis = 1; /* disable direct rcv dma mode */ cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */ cbp->ci_int = 1; /* interrupt on CU idle */ cbp->ext_txcb_dis = sc->flags & FXP_FLAG_EXT_TXCB ? 0 : 1; cbp->ext_stats_dis = 1; /* disable extended counters */ cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */ cbp->save_bf = sc->chip == FXP_CHIP_82557 ? 1 : prm; cbp->disc_short_rx = !prm; /* discard short packets */ cbp->underrun_retry = 1; /* retry mode (once) on DMA underrun */ cbp->two_frames = 0; /* do not limit FIFO to 2 frames */ cbp->dyn_tbd = 0; /* (no) dynamic TBD mode */ cbp->mediatype = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 0 : 1; cbp->csma_dis = 0; /* (don't) disable link */ cbp->tcp_udp_cksum = 0; /* (don't) enable checksum */ cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */ cbp->link_wake_en = 0; /* (don't) assert PME# on link change */ cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */ cbp->mc_wake_en = 0; /* (don't) enable PME# on mcmatch */ cbp->nsai = 1; /* (don't) disable source addr insert */ cbp->preamble_length = 2; /* (7 byte) preamble */ cbp->loopback = 0; /* (don't) loopback */ cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ cbp->linear_pri_mode = 0; /* (wait after xmit only) */ cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ cbp->promiscuous = prm; /* promiscuous mode */ cbp->bcast_disable = 0; /* (don't) disable broadcasts */ cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/ cbp->ignore_ul = 0; /* consider U/L bit in IA matching */ cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */ cbp->crscdt = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 1 : 0; cbp->stripping = !prm; /* truncate rx packet to byte count */ cbp->padding = 1; /* (do) pad short tx packets */ cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ cbp->long_rx_en = sc->flags & FXP_FLAG_LONG_PKT_EN ? 1 : 0; cbp->ia_wake_en = 0; /* (don't) wake up on address match */ cbp->magic_pkt_dis = 0; /* (don't) disable magic packet */ /* must set wake_en in PMCSR also */ cbp->force_fdx = 0; /* (don't) force full duplex */ cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ cbp->multi_ia = 0; /* (don't) accept multiple IAs */ cbp->mc_all = sc->flags & FXP_FLAG_ALL_MCAST ? 1 : 0; DBGLVL_PRINTK(5,"fxp_init: cbp initialized\n"); if (sc->chip == FXP_CHIP_82557) { /* * The 82557 has no hardware flow control, the values * below are the defaults for the chip. */ cbp->fc_delay_lsb = 0; cbp->fc_delay_msb = 0x40; cbp->pri_fc_thresh = 3; cbp->tx_fc_dis = 0; cbp->rx_fc_restop = 0; cbp->rx_fc_restart = 0; cbp->fc_filter = 0; cbp->pri_fc_loc = 1; } else { cbp->fc_delay_lsb = 0x1f; cbp->fc_delay_msb = 0x01; cbp->pri_fc_thresh = 3; cbp->tx_fc_dis = 0; /* enable transmit FC */ cbp->rx_fc_restop = 1; /* enable FC restop frames */ cbp->rx_fc_restart = 1; /* enable FC restart frames */ cbp->fc_filter = !prm; /* drop FC frames to host */ cbp->pri_fc_loc = 1; /* FC pri location (byte31) */ } /* * Start the config command/DMA. */ DBGLVL_PRINTK(5,"fxp_init: starting config command/DMA\n"); fxp_scb_wait(sc); CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&cbp->cb_status)); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); /* ...and wait for it to complete. */ fxp_dma_wait(&cbp->cb_status, sc); /* * Now initialize the station address. Temporarily use the TxCB * memory area like we did above for the config CB. */ DBGLVL_PRINTK(5,"fxp_init: initialize station address\n"); cb_ias = (struct fxp_cb_ias *) sc->cbl_base; cb_ias->cb_status = 0; cb_ias->cb_command = FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL; cb_ias->link_addr = -1; bcopy(sc->arpcom.ac_enaddr, (void *)(u_int32_t *)(volatile void *)cb_ias->macaddr, sizeof(sc->arpcom.ac_enaddr)); /* * Start the IAS (Individual Address Setup) command/DMA. */ DBGLVL_PRINTK(5,"fxp_init: start IAS command/DMA\n"); fxp_scb_wait(sc); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); /* ...and wait for it to complete. */ fxp_dma_wait(&cb_ias->cb_status, sc); /* * Initialize transmit control block (TxCB) list. */ DBGLVL_PRINTK(5,"fxp_init: initialize TxCB list\n"); txp = sc->cbl_base; bzero(txp, sizeof(struct fxp_cb_tx) * FXP_NTXCB); for (i = 0; i < FXP_NTXCB; i++) { txp[i].cb_status = FXP_CB_STATUS_C | FXP_CB_STATUS_OK; txp[i].cb_command = FXP_CB_COMMAND_NOP; txp[i].link_addr = vtophys(&txp[(i + 1) & FXP_TXCB_MASK].cb_status); if (sc->flags & FXP_FLAG_EXT_TXCB) txp[i].tbd_array_addr = vtophys(&txp[i].tbd[2]); else txp[i].tbd_array_addr = vtophys(&txp[i].tbd[0]); txp[i].next = &txp[(i + 1) & FXP_TXCB_MASK]; } /* * Set the suspend flag on the first TxCB and start the control * unit. It will execute the NOP and then suspend. */ DBGLVL_PRINTK(5,"fxp_init: setup suspend flag\n"); txp->cb_command = FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S; sc->cbl_first = sc->cbl_last = txp; sc->tx_queued = 1; fxp_scb_wait(sc); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); /* * Initialize receiver buffer area - RFA. */ DBGLVL_PRINTK(5,"fxp_init: initialize RFA\n"); fxp_scb_wait(sc); CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(sc->rfa_headm->m_ext.ext_buf) + RFA_ALIGNMENT_FUDGE); fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); #ifdef NOTUSED /* * Set current media. */ if (sc->miibus != NULL) mii_mediachg(device_get_softc(sc->miibus)); #endif ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; if (sc->daemonTid == 0) { /* * Start driver task */ sc->daemonTid = rtems_bsdnet_newproc ("FXPd", 4096, fxp_daemon, sc); } /* * Enable interrupts. */ CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0); splx(s); /* * Start stats updater. */ sc->stat_ch = fxp_timeout_running; DBGLVL_PRINTK(2,"fxp_init: stats updater timeout called with hz=%d\n", hz); timeout(fxp_tick, sc, hz); DBGLVL_PRINTK(2,"fxp_init finished\n"); } #ifdef NOTUSED static int fxp_serial_ifmedia_upd(struct ifnet *ifp) { return (0); } static void fxp_serial_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { ifmr->ifm_active = IFM_ETHER|IFM_MANUAL; } /* * Change media according to request. */ static int fxp_ifmedia_upd(struct ifnet *ifp) { struct fxp_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->miibus); mii_mediachg(mii); return (0); } /* * Notify the world which media we're using. */ static void fxp_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct fxp_softc *sc = ifp->if_softc; struct mii_data *mii; mii = device_get_softc(sc->miibus); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; if (ifmr->ifm_status & IFM_10_T && sc->flags & FXP_FLAG_CU_RESUME_BUG) sc->cu_resume_bug = 1; else sc->cu_resume_bug = 0; } #endif /* * Add a buffer to the end of the RFA buffer list. * Return 0 if successful, 1 for failure. A failure results in * adding the 'oldm' (if non-NULL) on to the end of the list - * tossing out its old contents and recycling it. * The RFA struct is stuck at the beginning of mbuf cluster and the * data pointer is fixed up to point just past it. */ static int fxp_add_rfabuf(struct fxp_softc *sc, struct mbuf *oldm) { u_int32_t v; struct mbuf *m; struct fxp_rfa *rfa, *p_rfa; DBGLVL_PRINTK(4,"fxp_add_rfabuf called\n"); MGETHDR(m, M_DONTWAIT, MT_DATA); if (m != NULL) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); if (oldm == NULL) return 1; m = oldm; m->m_data = m->m_ext.ext_buf; } } else { if (oldm == NULL) return 1; m = oldm; m->m_data = m->m_ext.ext_buf; } /* * Move the data pointer up so that the incoming data packet * will be 32-bit aligned. */ m->m_data += RFA_ALIGNMENT_FUDGE; /* * Get a pointer to the base of the mbuf cluster and move * data start past it. */ rfa = mtod(m, struct fxp_rfa *); m->m_data += sizeof(struct fxp_rfa); rfa->size = (u_int16_t)(MCLBYTES - sizeof(struct fxp_rfa) - RFA_ALIGNMENT_FUDGE); /* * Initialize the rest of the RFA. Note that since the RFA * is misaligned, we cannot store values directly. Instead, * we use an optimized, inline copy. */ rfa->rfa_status = 0; rfa->rfa_control = FXP_RFA_CONTROL_EL; rfa->actual_size = 0; v = -1; fxp_lwcopy(&v, (volatile u_int32_t *) rfa->link_addr); fxp_lwcopy(&v, (volatile u_int32_t *) rfa->rbd_addr); /* * If there are other buffers already on the list, attach this * one to the end by fixing up the tail to point to this one. */ if (sc->rfa_headm != NULL) { p_rfa = (struct fxp_rfa *) (sc->rfa_tailm->m_ext.ext_buf + RFA_ALIGNMENT_FUDGE); sc->rfa_tailm->m_next = m; v = vtophys(rfa); fxp_lwcopy(&v, (volatile u_int32_t *) p_rfa->link_addr); p_rfa->rfa_control = 0; } else { sc->rfa_headm = m; } sc->rfa_tailm = m; return (m == oldm); } #ifdef NOTUSED static volatile int fxp_miibus_readreg(device_t dev, int phy, int reg) { struct fxp_softc *sc = device_get_softc(dev); int count = 10000; int value; CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21)); while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 0x10000000) == 0 && count--) DELAY(10); if (count <= 0) device_printf(dev, "fxp_miibus_readreg: timed out\n"); return (value & 0xffff); } static void fxp_miibus_writereg(device_t dev, int phy, int reg, int value) { struct fxp_softc *sc = device_get_softc(dev); int count = 10000; CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) | (value & 0xffff)); while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 && count--) DELAY(10); if (count <= 0) device_printf(dev, "fxp_miibus_writereg: timed out\n"); } #endif static int fxp_ioctl(struct ifnet *ifp, int command, caddr_t data) { struct fxp_softc *sc = ifp->if_softc; #ifdef NOTUSED struct ifreq *ifr = (struct ifreq *)data; struct mii_data *mii; #endif int s, error = 0; DBGLVL_PRINTK(2,"fxp_ioctl called\n"); s = splimp(); switch (command) { case SIOCSIFADDR: case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, command, data); break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_ALLMULTI) sc->flags |= FXP_FLAG_ALL_MCAST; else sc->flags &= ~FXP_FLAG_ALL_MCAST; /* * If interface is marked up and not running, then start it. * If it is marked down and running, stop it. * XXX If it's up then re-initialize it. This is so flags * such as IFF_PROMISC are handled. */ if (ifp->if_flags & IFF_UP) { fxp_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) fxp_stop(sc); } break; case SIOCADDMULTI: case SIOCDELMULTI: if (ifp->if_flags & IFF_ALLMULTI) sc->flags |= FXP_FLAG_ALL_MCAST; else sc->flags &= ~FXP_FLAG_ALL_MCAST; /* * Multicast list has changed; set the hardware filter * accordingly. */ if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0) fxp_mc_setup(sc); /* * fxp_mc_setup() can set FXP_FLAG_ALL_MCAST, so check it * again rather than else {}. */ if (sc->flags & FXP_FLAG_ALL_MCAST) fxp_init(sc); error = 0; break; #ifdef NOTUSED case SIOCSIFMEDIA: case SIOCGIFMEDIA: if (sc->miibus != NULL) { mii = device_get_softc(sc->miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); } else { error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, command); } break; #endif case SIO_RTEMS_SHOW_STATS: fxp_stats(sc); break; default: error = EINVAL; } splx(s); return (error); } /* * Program the multicast filter. * * We have an artificial restriction that the multicast setup command * must be the first command in the chain, so we take steps to ensure * this. By requiring this, it allows us to keep up the performance of * the pre-initialized command ring (esp. link pointers) by not actually * inserting the mcsetup command in the ring - i.e. its link pointer * points to the TxCB ring, but the mcsetup descriptor itself is not part * of it. We then can do 'CU_START' on the mcsetup descriptor and have it * lead into the regular TxCB ring when it completes. * * This function must be called at splimp. */ static void fxp_mc_setup(struct fxp_softc *sc) { struct fxp_cb_mcs *mcsp = sc->mcsp; struct ifnet *ifp = &sc->sc_if; #ifdef NOTUSED struct ifmultiaddr *ifma; #endif int nmcasts; int count; DBGLVL_PRINTK(2,"fxp_mc_setup called\n"); /* * If there are queued commands, we must wait until they are all * completed. If we are already waiting, then add a NOP command * with interrupt option so that we're notified when all commands * have been completed - fxp_start() ensures that no additional * TX commands will be added when need_mcsetup is true. */ if (sc->tx_queued) { struct fxp_cb_tx *txp; /* * need_mcsetup will be true if we are already waiting for the * NOP command to be completed (see below). In this case, bail. */ if (sc->need_mcsetup) return; sc->need_mcsetup = 1; /* * Add a NOP command with interrupt so that we are notified when all * TX commands have been processed. */ txp = sc->cbl_last->next; txp->mb_head = NULL; txp->cb_status = 0; txp->cb_command = FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S | FXP_CB_COMMAND_I; /* * Advance the end of list forward. */ sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S; sc->cbl_last = txp; sc->tx_queued++; /* * Issue a resume in case the CU has just suspended. */ fxp_scb_wait(sc); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); /* * Set a 5 second timer just in case we don't hear from the * card again. */ ifp->if_timer = 5; return; } sc->need_mcsetup = 0; /* * Initialize multicast setup descriptor. */ mcsp->next = sc->cbl_base; mcsp->mb_head = NULL; mcsp->cb_status = 0; mcsp->cb_command = FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_S | FXP_CB_COMMAND_I; mcsp->link_addr = vtophys(&sc->cbl_base->cb_status); nmcasts = 0; #ifdef NOTUSED /* FIXME: Multicast not supported? */ if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0) { #if __FreeBSD_version < 500000 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { #else TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { #endif if (ifma->ifma_addr->sa_family != AF_LINK) continue; if (nmcasts >= MAXMCADDR) { sc->flags |= FXP_FLAG_ALL_MCAST; nmcasts = 0; break; } bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), (void *)(uintptr_t)(volatile void *) &sc->mcsp->mc_addr[nmcasts][0], 6); nmcasts++; } } #endif mcsp->mc_cnt = nmcasts * 6; sc->cbl_first = sc->cbl_last = (struct fxp_cb_tx *) mcsp; sc->tx_queued = 1; /* * Wait until command unit is not active. This should never * be the case when nothing is queued, but make sure anyway. */ count = 100; while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) == FXP_SCB_CUS_ACTIVE && --count) DELAY(10); if (count == 0) { device_printf(sc->dev, "command queue timeout\n"); return; } /* * Start the multicast setup command. */ fxp_scb_wait(sc); CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&mcsp->cb_status)); fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); ifp->if_timer = 2; return; } #endif /* defined(__i386__) */