source: rtems/c/src/lib/libcpu/sparc/include/erc32.h @ 33b304f

4.104.114.84.95
Last change on this file since 33b304f was 98e4ebf5, checked in by Joel Sherrill <joel.sherrill@…>, on 10/08/97 at 15:45:54

Fixed typo in the pointer to the license terms.

  • Property mode set to 100644
File size: 22.0 KB
Line 
1/*  erc32.h
2 *
3 *  This include file contains information pertaining to the ERC32.
4 *  The ERC32 is a custom SPARC V7 implementation based on the Cypress
5 *  601/602 chipset.  This CPU has a number of on-board peripherals and
6 *  was developed by the European Space Agency to target space applications.
7 *
8 *  NOTE:  Other than where absolutely required, this version currently
9 *         supports only the peripherals and bits used by the basic board
10 *         support package. This includes at least significant pieces of
11 *         the following items:
12 *
13 *           + UART Channels A and B
14 *           + General Purpose Timer
15 *           + Real Time Clock
16 *           + Watchdog Timer (so it can be disabled)
17 *           + Control Register (so powerdown mode can be enabled)
18 *           + Memory Control Register
19 *           + Interrupt Control
20 *
21 *  COPYRIGHT (c) 1989-1997.
22 *  On-Line Applications Research Corporation (OAR).
23 *  Copyright assigned to U.S. Government, 1994.
24 *
25 *  The license and distribution terms for this file may be
26 *  found in the file LICENSE in this distribution or at
27 *  http://www.OARcorp.com/rtems/license.html.
28 *
29 *  Ported to ERC32 implementation of the SPARC by On-Line Applications
30 *  Research Corporation (OAR) under contract to the European Space
31 *  Agency (ESA).
32 *
33 *  ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995.
34 *  European Space Agency.
35 *
36 *  $Id$
37 */
38 
39#ifndef _INCLUDE_ERC32_h
40#define _INCLUDE_ERC32_h
41
42#include <rtems/score/sparc.h>
43 
44#ifdef __cplusplus
45extern "C" {
46#endif
47
48/*
49 *  Interrupt Sources
50 *
51 *  The interrupt source numbers directly map to the trap type and to
52 *  the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
53 *  and the Interrupt Pending Registers.
54 */
55
56#define ERC32_INTERRUPT_MASKED_ERRORS             1
57#define ERC32_INTERRUPT_EXTERNAL_1                2
58#define ERC32_INTERRUPT_EXTERNAL_2                3
59#define ERC32_INTERRUPT_UART_A_RX_TX              4
60#define ERC32_INTERRUPT_UART_B_RX_TX              5
61#define ERC32_INTERRUPT_CORRECTABLE_MEMORY_ERROR  6
62#define ERC32_INTERRUPT_UART_ERROR                7
63#define ERC32_INTERRUPT_DMA_ACCESS_ERROR          8
64#define ERC32_INTERRUPT_DMA_TIMEOUT               9
65#define ERC32_INTERRUPT_EXTERNAL_3               10
66#define ERC32_INTERRUPT_EXTERNAL_4               11
67#define ERC32_INTERRUPT_GENERAL_PURPOSE_TIMER    12
68#define ERC32_INTERRUPT_REAL_TIME_CLOCK          13
69#define ERC32_INTERRUPT_EXTERNAL_5               14
70#define ERC32_INTERRUPT_WATCHDOG_TIMEOUT         15
71
72#ifndef ASM
73
74/*
75 *  Trap Types for on-chip peripherals
76 *
77 *  Source: Table 8 - Interrupt Trap Type and Default Priority Assignments
78 *
79 *  NOTE: The priority level for each source corresponds to the least
80 *        significant nibble of the trap type.
81 */
82
83#define ERC32_TRAP_TYPE( _source ) SPARC_ASYNCHRONOUS_TRAP((_source) + 0x10)
84
85#define ERC32_TRAP_SOURCE( _trap ) ((_trap) - 0x10)
86
87#define ERC32_Is_MEC_Trap( _trap ) \
88  ( (_trap) >= ERC32_TRAP_TYPE( ERC32_INTERRUPT_MASKED_ERRORS ) && \
89    (_trap) <= ERC32_TRAP_TYPE( ERC32_INTERRUPT_WATCHDOG_TIMEOUT ) )
90
91/*
92 *  Structure for ERC32 memory mapped registers. 
93 *
94 *  Source: Section 3.25.2 - Register Address Map
95 *
96 *  NOTE:  There is only one of these structures per CPU, its base address
97 *         is 0x01f80000, and the variable MEC is placed there by the
98 *         linkcmds file.
99 */
100
101typedef struct {
102  volatile unsigned32  Control;                              /* offset 0x00 */
103  volatile unsigned32  Software_Reset;                       /* offset 0x04 */
104  volatile unsigned32  Power_Down;                           /* offset 0x08 */
105  volatile unsigned32  Unimplemented_0;                      /* offset 0x0c */
106  volatile unsigned32  Memory_Configuration;                 /* offset 0x10 */
107  volatile unsigned32  IO_Configuration;                     /* offset 0x14 */
108  volatile unsigned32  Wait_State_Configuration;             /* offset 0x18 */
109  volatile unsigned32  Unimplemented_1;                      /* offset 0x1c */
110  volatile unsigned32  Memory_Access_0;                      /* offset 0x20 */
111  volatile unsigned32  Memory_Access_1;                      /* offset 0x24 */
112  volatile unsigned32  Unimplemented_2[ 7 ];                 /* offset 0x28 */
113  volatile unsigned32  Interrupt_Shape;                      /* offset 0x44 */
114  volatile unsigned32  Interrupt_Pending;                    /* offset 0x48 */
115  volatile unsigned32  Interrupt_Mask;                       /* offset 0x4c */
116  volatile unsigned32  Interrupt_Clear;                      /* offset 0x50 */
117  volatile unsigned32  Interrupt_Force;                      /* offset 0x54 */
118  volatile unsigned32  Unimplemented_3[ 2 ];                 /* offset 0x58 */
119                                                             /* offset 0x60 */
120  volatile unsigned32  Watchdog_Program_and_Timeout_Acknowledge;
121  volatile unsigned32  Watchdog_Trap_Door_Set;               /* offset 0x64 */
122  volatile unsigned32  Unimplemented_4[ 6 ];                 /* offset 0x68 */
123  volatile unsigned32  Real_Time_Clock_Counter;              /* offset 0x80 */
124  volatile unsigned32  Real_Time_Clock_Scalar;               /* offset 0x84 */
125  volatile unsigned32  General_Purpose_Timer_Counter;        /* offset 0x88 */
126  volatile unsigned32  General_Purpose_Timer_Scalar;         /* offset 0x8c */
127  volatile unsigned32  Unimplemented_5[ 2 ];                 /* offset 0x90 */
128  volatile unsigned32  Timer_Control;                        /* offset 0x98 */
129  volatile unsigned32  Unimplemented_6;                      /* offset 0x9c */
130  volatile unsigned32  System_Fault_Status;                  /* offset 0xa0 */
131  volatile unsigned32  First_Failing_Address;                /* offset 0xa4 */
132  volatile unsigned32  First_Failing_Data;                   /* offset 0xa8 */
133  volatile unsigned32  First_Failing_Syndrome_and_Check_Bits;/* offset 0xac */
134  volatile unsigned32  Error_and_Reset_Status;               /* offset 0xb0 */
135  volatile unsigned32  Error_Mask;                           /* offset 0xb4 */
136  volatile unsigned32  Unimplemented_7[ 2 ];                 /* offset 0xb8 */
137  volatile unsigned32  Debug_Control;                        /* offset 0xc0 */
138  volatile unsigned32  Breakpoint;                           /* offset 0xc4 */
139  volatile unsigned32  Watchpoint;                           /* offset 0xc8 */
140  volatile unsigned32  Unimplemented_8;                      /* offset 0xcc */
141  volatile unsigned32  Test_Control;                         /* offset 0xd0 */
142  volatile unsigned32  Test_Data;                            /* offset 0xd4 */
143  volatile unsigned32  Unimplemented_9[ 2 ];                 /* offset 0xd8 */
144  volatile unsigned32  UART_Channel_A;                       /* offset 0xe0 */
145  volatile unsigned32  UART_Channel_B;                       /* offset 0xe4 */
146  volatile unsigned32  UART_Status;                          /* offset 0xe8 */
147} ERC32_Register_Map;
148
149#endif
150
151/*
152 *  The following constants are intended to be used ONLY in assembly
153 *  language files.
154 *
155 *  NOTE:  The intended style of usage is to load the address of MEC
156 *         into a register and then use these as displacements from
157 *         that register.
158 */
159
160#ifdef ASM
161
162#define  ERC32_MEC_CONTROL_OFFSET                                  0x00
163#define  ERC32_MEC_SOFTWARE_RESET_OFFSET                           0x04
164#define  ERC32_MEC_POWER_DOWN_OFFSET                               0x08
165#define  ERC32_MEC_UNIMPLEMENTED_0_OFFSET                          0x0C
166#define  ERC32_MEC_MEMORY_CONFIGURATION_OFFSET                     0x10
167#define  ERC32_MEC_IO_CONFIGURATION_OFFSET                         0x14
168#define  ERC32_MEC_WAIT_STATE_CONFIGURATION_OFFSET                 0x18
169#define  ERC32_MEC_UNIMPLEMENTED_1_OFFSET                          0x1C
170#define  ERC32_MEC_MEMORY_ACCESS_0_OFFSET                          0x20
171#define  ERC32_MEC_MEMORY_ACCESS_1_OFFSET                          0x24
172#define  ERC32_MEC_UNIMPLEMENTED_2_OFFSET                          0x28
173#define  ERC32_MEC_INTERRUPT_SHAPE_OFFSET                          0x44
174#define  ERC32_MEC_INTERRUPT_PENDING_OFFSET                        0x48
175#define  ERC32_MEC_INTERRUPT_MASK_OFFSET                           0x4C
176#define  ERC32_MEC_INTERRUPT_CLEAR_OFFSET                          0x50
177#define  ERC32_MEC_INTERRUPT_FORCE_OFFSET                          0x54
178#define  ERC32_MEC_UNIMPLEMENTED_3_OFFSET                          0x58
179#define  ERC32_MEC_WATCHDOG_PROGRAM_AND_TIMEOUT_ACKNOWLEDGE_OFFSET 0x60
180#define  ERC32_MEC_WATCHDOG_TRAP_DOOR_SET_OFFSET                   0x64
181#define  ERC32_MEC_UNIMPLEMENTED_4_OFFSET                          0x6C
182#define  ERC32_MEC_REAL_TIME_CLOCK_COUNTER_OFFSET                  0x80
183#define  ERC32_MEC_REAL_TIME_CLOCK_SCALAR_OFFSET                   0x84
184#define  ERC32_MEC_GENERAL_PURPOSE_TIMER_COUNTER_OFFSET            0x88
185#define  ERC32_MEC_GENERAL_PURPOSE_TIMER_SCALAR_OFFSET             0x8C
186#define  ERC32_MEC_UNIMPLEMENTED_5_OFFSET                          0x90
187#define  ERC32_MEC_TIMER_CONTROL_OFFSET                            0x98
188#define  ERC32_MEC_UNIMPLEMENTED_6_OFFSET                          0x9C
189#define  ERC32_MEC_SYSTEM_FAULT_STATUS_OFFSET                      0xA0
190#define  ERC32_MEC_FIRST_FAILING_ADDRESS_OFFSET                    0xA4
191#define  ERC32_MEC_FIRST_FAILING_DATA_OFFSET                       0xA8
192#define  ERC32_MEC_FIRST_FAILING_SYNDROME_AND_CHECK_BITS_OFFSET    0xAC
193#define  ERC32_MEC_ERROR_AND_RESET_STATUS_OFFSET                   0xB0
194#define  ERC32_MEC_ERROR_MASK_OFFSET                               0xB4
195#define  ERC32_MEC_UNIMPLEMENTED_7_OFFSET                          0xB8
196#define  ERC32_MEC_DEBUG_CONTROL_OFFSET                            0xC0
197#define  ERC32_MEC_BREAKPOINT_OFFSET                               0xC4
198#define  ERC32_MEC_WATCHPOINT_OFFSET                               0xC8
199#define  ERC32_MEC_UNIMPLEMENTED_8_OFFSET                          0xCC
200#define  ERC32_MEC_TEST_CONTROL_OFFSET                             0xD0
201#define  ERC32_MEC_TEST_DATA_OFFSET                                0xD4
202#define  ERC32_MEC_UNIMPLEMENTED_9_OFFSET                          0xD8
203#define  ERC32_MEC_UART_CHANNEL_A_OFFSET                           0xE0
204#define  ERC32_MEC_UART_CHANNEL_B_OFFSET                           0xE4
205#define  ERC32_MEC_UART_STATUS_OFFSET                              0xE8
206
207#endif
208
209/*
210 *  The following defines the bits in the Configuration Register.
211 */
212
213#define ERC32_CONFIGURATION_POWER_DOWN_MASK               0x00000001
214#define ERC32_CONFIGURATION_POWER_DOWN_ALLOWED            0x00000001
215#define ERC32_CONFIGURATION_POWER_DOWN_DISABLED           0x00000000
216
217#define ERC32_CONFIGURATION_SOFTWARE_RESET_MASK           0x00000002
218#define ERC32_CONFIGURATION_SOFTWARE_RESET_ALLOWED        0x00000002
219#define ERC32_CONFIGURATION_SOFTWARE_RESET_DISABLED       0x00000000
220
221#define ERC32_CONFIGURATION_BUS_TIMEOUT_MASK              0x00000004
222#define ERC32_CONFIGURATION_BUS_TIMEOUT_ENABLED           0x00000004
223#define ERC32_CONFIGURATION_BUS_TIMEOUT_DISABLED          0x00000000
224
225#define ERC32_CONFIGURATION_ACCESS_PROTECTION_MASK        0x00000008
226#define ERC32_CONFIGURATION_ACCESS_PROTECTION_ENABLED     0x00000008
227#define ERC32_CONFIGURATION_ACCESS_PROTECTION_DISABLED    0x00000000
228
229
230/*
231 *  The following defines the bits in the Memory Configuration Register.
232 */
233
234#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_MASK  0x00001C00
235#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_256K  ( 0 << 10 )
236#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_512K  ( 1 << 10 )
237#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_1MB   ( 2 << 10 )
238#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_2MB   ( 3 << 10 )
239#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_4MB   ( 4 << 10 )
240#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_8MB   ( 5 << 10 )
241#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_16MB  ( 6 << 10 )
242#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_32MB  ( 7 << 10 )
243
244#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_MASK  0x001C0000
245#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_128K    ( 0 << 18 )
246#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_256K    ( 1 << 18 )
247#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_512K   ( 2 << 18 )
248#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_1M   ( 3 << 18 )
249#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_2M   ( 4 << 18 )
250#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_4M  ( 5 << 18 )
251#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_8M  ( 6 << 18 )
252#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_16M  ( 7 << 18 )
253 
254/*
255 *  The following defines the bits in the Timer Control Register.
256 */
257
258#define ERC32_MEC_TIMER_CONTROL_GCR    0x00000001  /* 1 = reload at 0 */
259                                               /* 0 = stop at 0 */
260#define ERC32_MEC_TIMER_CONTROL_GCL    0x00000002  /* 1 = load and start */
261                                               /* 0 = no function */
262#define ERC32_MEC_TIMER_CONTROL_GSE    0x00000004  /* 1 = enable counting */
263                                               /* 0 = hold scalar and counter */
264#define ERC32_MEC_TIMER_CONTROL_GSL    0x00000008  /* 1 = load scalar and start */
265                                               /* 0 = no function */
266
267#define ERC32_MEC_TIMER_CONTROL_RTCCR  0x00000100  /* 1 = reload at 0 */
268                                               /* 0 = stop at 0 */
269#define ERC32_MEC_TIMER_CONTROL_RTCCL  0x00000200  /* 1 = load and start */
270                                               /* 0 = no function */
271#define ERC32_MEC_TIMER_CONTROL_RTCSE  0x00000400  /* 1 = enable counting */
272                                               /* 0 = hold scalar and counter */
273#define ERC32_MEC_TIMER_CONTROL_RTCSL  0x00000800  /* 1 = load scalar and start */
274                                               /* 0 = no function */
275
276/*
277 *  The following defines the bits in the UART Control Registers.
278 *
279 */
280
281#define ERC32_MEC_UART_CONTROL_RTD  0x000000FF /* RX/TX data */
282 
283/*
284 *  The following defines the bits in the MEC UART Control Registers.
285 */
286
287#define ERC32_MEC_UART_STATUS_DR   0x00000001 /* Data Ready */
288#define ERC32_MEC_UART_STATUS_TSE  0x00000002 /* TX Send Register Empty */
289#define ERC32_MEC_UART_STATUS_THE  0x00000004 /* TX Hold Register Empty */
290#define ERC32_MEC_UART_STATUS_FE   0x00000010 /* RX Framing Error */
291#define ERC32_MEC_UART_STATUS_PE   0x00000020 /* RX Parity Error */
292#define ERC32_MEC_UART_STATUS_OE   0x00000040 /* RX Overrun Error */
293#define ERC32_MEC_UART_STATUS_CU   0x00000080 /* Clear Errors */
294#define ERC32_MEC_UART_STATUS_TXE  0x00000006 /* TX Empty */
295#define ERC32_MEC_UART_STATUS_CLRA 0x00000080 /* Clear UART A */
296#define ERC32_MEC_UART_STATUS_CLRB 0x00800000 /* Clear UART B */
297#define ERC32_MEC_UART_STATUS_ERRA 0x00000070 /* Error in UART A */
298#define ERC32_MEC_UART_STATUS_ERRB 0x00700000 /* Error in UART B */
299
300#define ERC32_MEC_UART_STATUS_DRA   (ERC32_MEC_UART_STATUS_DR  << 0)
301#define ERC32_MEC_UART_STATUS_TSEA  (ERC32_MEC_UART_STATUS_TSE << 0)
302#define ERC32_MEC_UART_STATUS_THEA  (ERC32_MEC_UART_STATUS_THE << 0)
303#define ERC32_MEC_UART_STATUS_FEA   (ERC32_MEC_UART_STATUS_FE  << 0)
304#define ERC32_MEC_UART_STATUS_PEA   (ERC32_MEC_UART_STATUS_PE  << 0)
305#define ERC32_MEC_UART_STATUS_OEA   (ERC32_MEC_UART_STATUS_OE  << 0)
306#define ERC32_MEC_UART_STATUS_CUA   (ERC32_MEC_UART_STATUS_CU  << 0)
307#define ERC32_MEC_UART_STATUS_TXEA  (ERC32_MEC_UART_STATUS_TXE << 0)
308
309#define ERC32_MEC_UART_STATUS_DRB   (ERC32_MEC_UART_STATUS_DR  << 16)
310#define ERC32_MEC_UART_STATUS_TSEB  (ERC32_MEC_UART_STATUS_TSE << 16)
311#define ERC32_MEC_UART_STATUS_THEB  (ERC32_MEC_UART_STATUS_THE << 16)
312#define ERC32_MEC_UART_STATUS_FEB   (ERC32_MEC_UART_STATUS_FE  << 16)
313#define ERC32_MEC_UART_STATUS_PEB   (ERC32_MEC_UART_STATUS_PE  << 16)
314#define ERC32_MEC_UART_STATUS_OEB   (ERC32_MEC_UART_STATUS_OE  << 16)
315#define ERC32_MEC_UART_STATUS_CUB   (ERC32_MEC_UART_STATUS_CU  << 16)
316#define ERC32_MEC_UART_STATUS_TXEB  (ERC32_MEC_UART_STATUS_TXE << 16)
317
318#ifndef ASM
319
320/*
321 *  This is used to manipulate the on-chip registers.
322 *
323 *  The following symbol must be defined in the linkcmds file and point
324 *  to the correct location.
325 */
326
327extern ERC32_Register_Map ERC32_MEC;
328 
329/*
330 *  Macros to manipulate the Interrupt Clear, Interrupt Force, Interrupt Mask,
331 *  and the Interrupt Pending Registers.
332 *
333 *  NOTE: For operations which are not atomic, this code disables interrupts
334 *        to guarantee there are no intervening accesses to the same register.
335 *        The operations which read the register, modify the value and then
336 *        store the result back are vulnerable.
337 */
338
339#define ERC32_Clear_interrupt( _source ) \
340  do { \
341    ERC32_MEC.Interrupt_Clear = (1 << (_source)); \
342  } while (0)
343
344#define ERC32_Force_interrupt( _source ) \
345  do { \
346    unsigned32 _level; \
347    \
348    sparc_disable_interrupts( _level ); \
349    ERC32_MEC.Test_Control = ERC32_MEC.Test_Control | 0x80000; \
350    ERC32_MEC.Interrupt_Force = (1 << (_source)); \
351    sparc_enable_interrupts( _level ); \
352  } while (0)
353 
354#define ERC32_Is_interrupt_pending( _source ) \
355  (ERC32_MEC.Interrupt_Pending & (1 << (_source)))
356 
357#define ERC32_Is_interrupt_masked( _source ) \
358  (ERC32_MEC.Interrupt_Masked & (1 << (_source)))
359 
360#define ERC32_Mask_interrupt( _source ) \
361  do { \
362    unsigned32 _level; \
363    \
364    sparc_disable_interrupts( _level ); \
365      ERC32_MEC.Interrupt_Mask |= (1 << (_source)); \
366    sparc_enable_interrupts( _level ); \
367  } while (0)
368 
369#define ERC32_Unmask_interrupt( _source ) \
370  do { \
371    unsigned32 _level; \
372    \
373    sparc_disable_interrupts( _level ); \
374      ERC32_MEC.Interrupt_Mask &= ~(1 << (_source)); \
375    sparc_enable_interrupts( _level ); \
376  } while (0)
377
378#define ERC32_Disable_interrupt( _source, _previous ) \
379  do { \
380    unsigned32 _level; \
381    unsigned32 _mask = 1 << (_source); \
382    \
383    sparc_disable_interrupts( _level ); \
384      (_previous) = ERC32_MEC.Interrupt_Mask; \
385      ERC32_MEC.Interrupt_Mask = _previous | _mask; \
386    sparc_enable_interrupts( _level ); \
387    (_previous) &= ~_mask; \
388  } while (0)
389 
390#define ERC32_Restore_interrupt( _source, _previous ) \
391  do { \
392    unsigned32 _level; \
393    unsigned32 _mask = 1 << (_source); \
394    \
395    sparc_disable_interrupts( _level ); \
396      ERC32_MEC.Interrupt_Mask = \
397        (ERC32_MEC.Interrupt_Mask & ~_mask) | (_previous); \
398    sparc_enable_interrupts( _level ); \
399  } while (0)
400
401/*
402 *  The following macros attempt to hide the fact that the General Purpose
403 *  Timer and Real Time Clock Timer share the Timer Control Register.  Because
404 *  the Timer Control Register is write only, we must mirror it in software
405 *  and insure that writes to one timer do not alter the current settings
406 *  and status of the other timer.
407 *
408 *  This code promotes the view that the two timers are completely independent.
409 *  By exclusively using the routines below to access the Timer Control
410 *  Register, the application can view the system as having a General Purpose
411 *  Timer Control Register and a Real Time Clock Timer Control Register
412 *  rather than the single shared value.
413 *
414 *  Each logical timer control register is organized as follows:
415 *
416 *    D0 - Counter Reload
417 *          1 = reload counter at zero and restart
418 *          0 = stop counter at zero
419 *
420 *    D1 - Counter Load
421 *          1 = load counter with preset value and restart
422 *          0 = no function
423 *
424 *    D2 - Enable
425 *          1 = enable counting
426 *          0 = hold scaler and counter
427 *
428 *    D3 - Scaler Load
429 *          1 = load scalar with preset value and restart
430 *          0 = no function
431 *
432 *  To insure the management of the mirror is atomic, we disable interrupts
433 *  around updates.
434 */
435
436#define ERC32_MEC_TIMER_COUNTER_RELOAD_AT_ZERO     0x00000001
437#define ERC32_MEC_TIMER_COUNTER_STOP_AT_ZERO       0x00000000
438
439#define ERC32_MEC_TIMER_COUNTER_LOAD_COUNTER       0x00000002
440
441#define ERC32_MEC_TIMER_COUNTER_ENABLE_COUNTING    0x00000004
442#define ERC32_MEC_TIMER_COUNTER_DISABLE_COUNTING   0x00000000
443
444#define ERC32_MEC_TIMER_COUNTER_LOAD_SCALER        0x00000008
445
446#define ERC32_MEC_TIMER_COUNTER_RELOAD_MASK        0x00000001
447#define ERC32_MEC_TIMER_COUNTER_ENABLE_MASK        0x00000004
448
449#define ERC32_MEC_TIMER_COUNTER_DEFINED_MASK       0x0000000F
450#define ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK  0x00000005
451
452extern unsigned32 _ERC32_MEC_Timer_Control_Mirror;
453
454/*
455 *  This macros manipulate the General Purpose Timer portion of the
456 *  Timer Control register and promote the view that there are actually
457 *  two independent Timer Control Registers.
458 */
459
460#define ERC32_MEC_Set_General_Purpose_Timer_Control( _value ) \
461  do { \
462    unsigned32 _level; \
463    unsigned32 _control; \
464    unsigned32 __value; \
465    \
466    __value = ((_value) & 0x0f); \
467    sparc_disable_interrupts( _level ); \
468      _control = _ERC32_MEC_Timer_Control_Mirror; \
469      _control &= ERC32_MEC_TIMER_COUNTER_DEFINED_MASK << 8; \
470      _ERC32_MEC_Timer_Control_Mirror = _control | _value; \
471      _control &= (ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK << 8); \
472      _control |= __value; \
473      /* printf( "GPT 0x%x 0x%x 0x%x\n", _value, __value, _control );  */ \
474      ERC32_MEC.Timer_Control = _control; \
475    sparc_enable_interrupts( _level ); \
476  } while ( 0 )
477
478#define ERC32_MEC_Get_General_Purpose_Timer_Control( _value ) \
479  do { \
480    (_value) = _ERC32_MEC_Timer_Control_Mirror & 0xf; \
481  } while ( 0 )
482
483/*
484 *  This macros manipulate the Real Timer Clock Timer portion of the
485 *  Timer Control register and promote the view that there are actually
486 *  two independent Timer Control Registers.
487 */
488 
489#define ERC32_MEC_Set_Real_Time_Clock_Timer_Control( _value ) \
490  do { \
491    unsigned32 _level; \
492    unsigned32 _control; \
493    unsigned32 __value; \
494    \
495    __value = ((_value) & 0x0f) << 8; \
496    sparc_disable_interrupts( _level ); \
497      _control = _ERC32_MEC_Timer_Control_Mirror; \
498      _control &= ERC32_MEC_TIMER_COUNTER_DEFINED_MASK; \
499      _ERC32_MEC_Timer_Control_Mirror = _control | __value; \
500      _control &= ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK; \
501      _control |= __value; \
502      /* printf( "RTC 0x%x 0x%x 0x%x\n", _value, __value, _control ); */ \
503      ERC32_MEC.Timer_Control = _control; \
504    sparc_enable_interrupts( _level ); \
505  } while ( 0 )
506 
507#define ERC32_MEC_Get_Real_Time_Clock_Timer_Control( _value ) \
508  do { \
509    (_value) = (_ERC32_MEC_Timer_Control_Mirror >> 8) & 0xf; \
510  } while ( 0 )
511
512
513#endif /* !ASM */
514
515#ifdef __cplusplus
516}
517#endif
518 
519#endif /* !_INCLUDE_ERC32_h */
520/* end of include file */
521
Note: See TracBrowser for help on using the repository browser.