4.104.114.84.95
Last change
on this file since 4a238002 was
4a238002,
checked in by Joel Sherrill <joel.sherrill@…>, on 11/18/99 at 21:22:58
|
Patch from "John M. Mills" <jmills@…> with subsequent cleanup from
Ralf Corsepius <corsepiu@…> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:
Changes:
------
- SH-Port:
- Many files renamed.
- CONSOLE_DEVNAME and MHZ defines removed from libcpu.
- console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console
applying VPATH.
- CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
- MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
- -DHZ=HZ used in bspstart.c, only
- Makefile variable HZ used in bsp-dependent directories only.
- SH1-Port
- clock-driver rewritten to provide better resolution for odd CPU
frequencies. This driver is only partially tested on hardware, ie.
sightly experimental, but I don't expect severe problems with it.
- Polling SCI-driver added. This driver is experimental and completly
untested yet. Therefore it is not yet used for the console (/dev/console
is still pointing to /dev/null, cf. gensh1/bsp.h).
- minor changes to the timer driver
- SH1 specific delay()/CPU_delay() now is implemented as a function
- SH2-Port
- Merged
- IMO, the code is still in its infancy. Therefore I have interspersed
comments (FIXME) it for items which I think John should look after.
- sci and console drivers partially rewritten and extended (John, I hope
you don't mind).
- Copyright notices are not yet adapted
|
-
Property mode set to
100644
|
File size:
1.4 KB
|
Line | |
---|
1 | ## |
---|
2 | ## $Id$ |
---|
3 | ## |
---|
4 | |
---|
5 | @SET_MAKE@ |
---|
6 | srcdir = @srcdir@ |
---|
7 | top_srcdir = @top_srcdir@ |
---|
8 | top_builddir = ../../.. |
---|
9 | subdir = sh/sh7045/sci |
---|
10 | |
---|
11 | RTEMS_ROOT = @RTEMS_ROOT@ |
---|
12 | PROJECT_ROOT = @PROJECT_ROOT@ |
---|
13 | |
---|
14 | VPATH = @srcdir@ |
---|
15 | |
---|
16 | PGM = ${ARCH}/sci.rel |
---|
17 | |
---|
18 | # C source names, if any, go here -- minus the .c |
---|
19 | C_PIECES = sci |
---|
20 | C_FILES = $(C_PIECES:%=%.c) |
---|
21 | C_O_FILES = $(C_PIECES:%=${ARCH}/%.o) |
---|
22 | |
---|
23 | H_FILES = |
---|
24 | |
---|
25 | # Assembly source names, if any, go here -- minus the .s |
---|
26 | S_PIECES = |
---|
27 | S_FILES = $(S_PIECES:%=%.s) |
---|
28 | S_O_FILES = $(S_FILES:%.s=${ARCH}/%.o) |
---|
29 | |
---|
30 | SRCS = $(C_FILES) $(H_FILES) $(S_FILES) |
---|
31 | OBJS = $(C_O_FILES) $(S_O_FILES) |
---|
32 | |
---|
33 | include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg |
---|
34 | include $(RTEMS_ROOT)/make/leaf.cfg |
---|
35 | |
---|
36 | INSTALL_CHANGE = @INSTALL_CHANGE@ |
---|
37 | |
---|
38 | # |
---|
39 | # (OPTIONAL) Add local stuff here using += |
---|
40 | # |
---|
41 | |
---|
42 | DEFINES += |
---|
43 | CPPFLAGS += |
---|
44 | CFLAGS += |
---|
45 | |
---|
46 | LD_PATHS += |
---|
47 | LD_LIBS += |
---|
48 | LDFLAGS += |
---|
49 | |
---|
50 | # |
---|
51 | # Add your list of files to delete here. The config files |
---|
52 | # already know how to delete some stuff, so you may want |
---|
53 | # to just run 'make clean' first to see what gets missed. |
---|
54 | # 'make clobber' already includes 'make clean' |
---|
55 | # |
---|
56 | |
---|
57 | CLEAN_ADDITIONS += |
---|
58 | CLOBBER_ADDITIONS += |
---|
59 | |
---|
60 | ${PGM}: ${SRCS} ${OBJS} |
---|
61 | $(make-rel) |
---|
62 | |
---|
63 | all: ${ARCH} $(SRCS) $(PGM) |
---|
64 | |
---|
65 | # the .rel file built here will be put into libbsp.a by |
---|
66 | # libbsp/sh/BSP/wrapup/Makefile |
---|
67 | install: all |
---|
68 | |
---|
69 | Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
---|
70 | cd $(top_builddir) \ |
---|
71 | && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status |
---|
Note: See
TracBrowser
for help on using the repository browser.