source: rtems/c/src/lib/libcpu/sh/sh7032/Makefile.in @ 4a238002

4.104.114.84.95
Last change on this file since 4a238002 was 4a238002, checked in by Joel Sherrill <joel.sherrill@…>, on 11/18/99 at 21:22:58

Patch from "John M. Mills" <jmills@…> with subsequent cleanup from
Ralf Corsepius <corsepiu@…> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:

Changes:
------

  1. SH-Port:
  • Many files renamed.
  • CONSOLE_DEVNAME and MHZ defines removed from libcpu.
  • console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console applying VPATH.
  • CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
  • MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
  • -DHZ=HZ used in bspstart.c, only
  • Makefile variable HZ used in bsp-dependent directories only.
  1. SH1-Port
  • clock-driver rewritten to provide better resolution for odd CPU frequencies. This driver is only partially tested on hardware, ie. sightly experimental, but I don't expect severe problems with it.
  • Polling SCI-driver added. This driver is experimental and completly untested yet. Therefore it is not yet used for the console (/dev/console is still pointing to /dev/null, cf. gensh1/bsp.h).
  • minor changes to the timer driver
  • SH1 specific delay()/CPU_delay() now is implemented as a function
  1. SH2-Port
  • Merged
  • IMO, the code is still in its infancy. Therefore I have interspersed comments (FIXME) it for items which I think John should look after.
  • sci and console drivers partially rewritten and extended (John, I hope you don't mind).
  • Copyright notices are not yet adapted
  • Property mode set to 100644
File size: 513 bytes
RevLine 
[f8b27df9]1#
2# $Id$
3#
4
5@SET_MAKE@
6srcdir = @srcdir@
[d8ff793]7top_srcdir = @top_srcdir@
[e1d8abb]8top_builddir = ../..
9subdir = sh/sh7032
[f8b27df9]10
[6693a68]11RTEMS_ROOT = @RTEMS_ROOT@
[d8ff793]12PROJECT_ROOT = @PROJECT_ROOT@
13
[6693a68]14VPATH = @srcdir@
[d8ff793]15
[6693a68]16include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
[f8b27df9]17include $(RTEMS_ROOT)/make/directory.cfg
18
[6693a68]19INSTALL_CHANGE = @INSTALL_CHANGE@
20
[4a238002]21SUB_DIRS = include clock timer null sci delay
[d8ff793]22
[08b5f55]23Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
[d8ff793]24        cd $(top_builddir) \
25         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Note: See TracBrowser for help on using the repository browser.