1 | /*===============================================================*\ |
---|
2 | | Project: RTEMS support for MPC83xx | |
---|
3 | +-----------------------------------------------------------------+ |
---|
4 | | Copyright (c) 2007 | |
---|
5 | | Embedded Brains GmbH | |
---|
6 | | Obere Lagerstr. 30 | |
---|
7 | | D-82178 Puchheim | |
---|
8 | | Germany | |
---|
9 | | rtems@embedded-brains.de | |
---|
10 | +-----------------------------------------------------------------+ |
---|
11 | | The license and distribution terms for this file may be | |
---|
12 | | found in the file LICENSE in this distribution or at | |
---|
13 | | | |
---|
14 | | http://www.rtems.com/license/LICENSE. | |
---|
15 | | | |
---|
16 | +-----------------------------------------------------------------+ |
---|
17 | | this file contains the MPC83xx I2C driver | |
---|
18 | \*===============================================================*/ |
---|
19 | #include <stdlib.h> |
---|
20 | #include <bsp.h> |
---|
21 | #include <bsp/irq.h> |
---|
22 | #include <mpc83xx/mpc83xx.h> |
---|
23 | #include <mpc83xx/mpc83xx_i2cdrv.h> |
---|
24 | #include <rtems/error.h> |
---|
25 | #include <rtems/bspIo.h> |
---|
26 | #include <errno.h> |
---|
27 | #include <rtems/libi2c.h> |
---|
28 | |
---|
29 | #define DEBUG |
---|
30 | |
---|
31 | /*=========================================================================*\ |
---|
32 | | Function: | |
---|
33 | \*-------------------------------------------------------------------------*/ |
---|
34 | static int mpc83xx_i2c_find_clock_divider |
---|
35 | ( |
---|
36 | /*-------------------------------------------------------------------------*\ |
---|
37 | | Purpose: | |
---|
38 | | determine proper divider value | |
---|
39 | +---------------------------------------------------------------------------+ |
---|
40 | | Input Parameters: | |
---|
41 | \*-------------------------------------------------------------------------*/ |
---|
42 | uint8_t *result, /* result value */ |
---|
43 | int divider /* requested divider */ |
---|
44 | ) |
---|
45 | /*-------------------------------------------------------------------------*\ |
---|
46 | | Return Value: | |
---|
47 | | o = ok or error code | |
---|
48 | \*=========================================================================*/ |
---|
49 | { |
---|
50 | int i; |
---|
51 | int fdr_val; |
---|
52 | struct { |
---|
53 | int divider; |
---|
54 | int fdr_val; |
---|
55 | } dividers[] ={ |
---|
56 | { 256,0x20 }, { 288,0x21 }, { 320,0x22 }, { 352,0x23 }, |
---|
57 | { 384,0x00 }, { 416,0x01 }, { 448,0x25 }, { 480,0x02 }, |
---|
58 | { 512,0x26 }, { 576,0x03 }, { 640,0x04 }, { 704,0x05 }, |
---|
59 | { 768,0x29 }, { 832,0x06 }, { 896,0x2a }, { 1024,0x07 }, |
---|
60 | { 1152,0x08 }, { 1280,0x09 }, { 1536,0x0A }, { 1792,0x2E }, |
---|
61 | { 1920,0x0B }, { 2048,0x2F }, { 2304,0x0C }, { 2560,0x0D }, |
---|
62 | { 3072,0x0E }, { 3584,0x32 }, { 3840,0x0F }, { 4096,0x33 }, |
---|
63 | { 4608,0x10 }, { 5120,0x11 }, { 6144,0x12 }, { 7168,0x36 }, |
---|
64 | { 7680,0x13 }, { 8192,0x37 }, { 9216,0x14 }, {10240,0x15 }, |
---|
65 | {12288,0x16 }, {14336,0x3A }, {15360,0x17 }, {16384,0x3B }, |
---|
66 | {18432,0x18 }, {20480,0x19 }, {24576,0x1A }, {28672,0x3E }, |
---|
67 | {30720,0x1B }, {32768,0x3F }, {36864,0x1C }, {40960,0x1D }, |
---|
68 | {49152,0x1E }, {61440,0x1F } |
---|
69 | }; |
---|
70 | |
---|
71 | for (i = 0, fdr_val = -1; i < sizeof(dividers)/sizeof(dividers[0]); i++) { |
---|
72 | fdr_val = dividers[i].fdr_val; |
---|
73 | if (dividers[i].divider >= divider) |
---|
74 | { |
---|
75 | break; |
---|
76 | } |
---|
77 | } |
---|
78 | *result = fdr_val; |
---|
79 | return 0; |
---|
80 | } |
---|
81 | |
---|
82 | /*=========================================================================*\ |
---|
83 | | Function: | |
---|
84 | \*-------------------------------------------------------------------------*/ |
---|
85 | static int mpc83xx_i2c_wait |
---|
86 | ( |
---|
87 | /*-------------------------------------------------------------------------*\ |
---|
88 | | Purpose: | |
---|
89 | | wait for i2c to become idle | |
---|
90 | +---------------------------------------------------------------------------+ |
---|
91 | | Input Parameters: | |
---|
92 | \*-------------------------------------------------------------------------*/ |
---|
93 | mpc83xx_i2c_softc_t *softc_ptr, /* handle */ |
---|
94 | uint8_t desired_status, /* desired status word */ |
---|
95 | uint8_t status_mask /* status word mask */ |
---|
96 | ) |
---|
97 | /*-------------------------------------------------------------------------*\ |
---|
98 | | Return Value: | |
---|
99 | | o = ok or error code | |
---|
100 | \*=========================================================================*/ |
---|
101 | { |
---|
102 | uint8_t act_status; |
---|
103 | rtems_status_code rc; |
---|
104 | uint32_t tout; |
---|
105 | |
---|
106 | #if defined(DEBUG) |
---|
107 | printk("mpc83xx_i2c_wait called... "); |
---|
108 | #endif |
---|
109 | |
---|
110 | if (softc_ptr->initialized) { |
---|
111 | /* |
---|
112 | * enable interrupt mask |
---|
113 | */ |
---|
114 | softc_ptr->reg_ptr->i2ccr |= MPC83XX_I2CCR_MIEN; |
---|
115 | rc = rtems_semaphore_obtain(softc_ptr->irq_sema_id,RTEMS_WAIT,100); |
---|
116 | if (rc != RTEMS_SUCCESSFUL) { |
---|
117 | return rc; |
---|
118 | } |
---|
119 | } |
---|
120 | else { |
---|
121 | tout = 0; |
---|
122 | do { |
---|
123 | if (tout++ > 1000000) { |
---|
124 | #if defined(DEBUG) |
---|
125 | printk("... exit with RTEMS_TIMEOUT\r\n"); |
---|
126 | #endif |
---|
127 | return RTEMS_TIMEOUT; |
---|
128 | } |
---|
129 | } while (!(softc_ptr->reg_ptr->i2csr & MPC83XX_I2CSR_MIF)); |
---|
130 | } |
---|
131 | softc_ptr->reg_ptr->i2ccr &= ~MPC83XX_I2CCR_MIEN; |
---|
132 | |
---|
133 | act_status = softc_ptr->reg_ptr->i2csr; |
---|
134 | if ((act_status & status_mask) != desired_status) { |
---|
135 | #if defined(DEBUG) |
---|
136 | printk("... exit with RTEMS_IO_ERROR\r\n"); |
---|
137 | #endif |
---|
138 | return RTEMS_IO_ERROR; |
---|
139 | } |
---|
140 | #if defined(DEBUG) |
---|
141 | printk("... exit OK\r\n"); |
---|
142 | #endif |
---|
143 | return RTEMS_SUCCESSFUL; |
---|
144 | } |
---|
145 | |
---|
146 | /*=========================================================================*\ |
---|
147 | | Function: | |
---|
148 | \*-------------------------------------------------------------------------*/ |
---|
149 | static void mpc83xx_i2c_irq_handler |
---|
150 | ( |
---|
151 | /*-------------------------------------------------------------------------*\ |
---|
152 | | Purpose: | |
---|
153 | | handle interrupts | |
---|
154 | +---------------------------------------------------------------------------+ |
---|
155 | | Input Parameters: | |
---|
156 | \*-------------------------------------------------------------------------*/ |
---|
157 | rtems_irq_hdl_param handle /* handle, is softc_ptr structure */ |
---|
158 | ) |
---|
159 | /*-------------------------------------------------------------------------*\ |
---|
160 | | Return Value: | |
---|
161 | | <none> | |
---|
162 | \*=========================================================================*/ |
---|
163 | { |
---|
164 | mpc83xx_i2c_softc_t *softc_ptr = (mpc83xx_i2c_softc_t *)handle; |
---|
165 | |
---|
166 | /* |
---|
167 | * disable interrupt mask |
---|
168 | */ |
---|
169 | softc_ptr->reg_ptr->i2ccr &= ~MPC83XX_I2CCR_MIEN; |
---|
170 | if (softc_ptr->initialized) { |
---|
171 | rtems_semaphore_release(softc_ptr->irq_sema_id); |
---|
172 | } |
---|
173 | } |
---|
174 | |
---|
175 | /*=========================================================================*\ |
---|
176 | | Function: | |
---|
177 | \*-------------------------------------------------------------------------*/ |
---|
178 | static void mpc83xx_i2c_irq_on_off |
---|
179 | ( |
---|
180 | /*-------------------------------------------------------------------------*\ |
---|
181 | | Purpose: | |
---|
182 | | enable/disable interrupts (void, handled at different position) | |
---|
183 | +---------------------------------------------------------------------------+ |
---|
184 | | Input Parameters: | |
---|
185 | \*-------------------------------------------------------------------------*/ |
---|
186 | const |
---|
187 | rtems_irq_connect_data *irq_conn_data /* irq connect data */ |
---|
188 | ) |
---|
189 | /*-------------------------------------------------------------------------*\ |
---|
190 | | Return Value: | |
---|
191 | | <none> | |
---|
192 | \*=========================================================================*/ |
---|
193 | { |
---|
194 | } |
---|
195 | |
---|
196 | |
---|
197 | /*=========================================================================*\ |
---|
198 | | Function: | |
---|
199 | \*-------------------------------------------------------------------------*/ |
---|
200 | static int mpc83xx_i2c_irq_isOn |
---|
201 | ( |
---|
202 | /*-------------------------------------------------------------------------*\ |
---|
203 | | Purpose: | |
---|
204 | | check state of interrupts, void, done differently | |
---|
205 | +---------------------------------------------------------------------------+ |
---|
206 | | Input Parameters: | |
---|
207 | \*-------------------------------------------------------------------------*/ |
---|
208 | const |
---|
209 | rtems_irq_connect_data *irq_conn_data /* irq connect data */ |
---|
210 | ) |
---|
211 | /*-------------------------------------------------------------------------*\ |
---|
212 | | Return Value: | |
---|
213 | | TRUE, if enabled | |
---|
214 | \*=========================================================================*/ |
---|
215 | { |
---|
216 | return (TRUE); |
---|
217 | } |
---|
218 | |
---|
219 | /*=========================================================================*\ |
---|
220 | | Function: | |
---|
221 | \*-------------------------------------------------------------------------*/ |
---|
222 | static void mpc83xx_i2c_install_irq_handler |
---|
223 | ( |
---|
224 | /*-------------------------------------------------------------------------*\ |
---|
225 | | Purpose: | |
---|
226 | | (un-)install the interrupt handler | |
---|
227 | +---------------------------------------------------------------------------+ |
---|
228 | | Input Parameters: | |
---|
229 | \*-------------------------------------------------------------------------*/ |
---|
230 | mpc83xx_i2c_softc_t *softc_ptr, /* ptr to control structure */ |
---|
231 | int install /* TRUE: install, FALSE: remove */ |
---|
232 | ) |
---|
233 | /*-------------------------------------------------------------------------*\ |
---|
234 | | Return Value: | |
---|
235 | | <none> | |
---|
236 | \*=========================================================================*/ |
---|
237 | { |
---|
238 | rtems_status_code rc = RTEMS_SUCCESSFUL; |
---|
239 | |
---|
240 | rtems_irq_connect_data irq_conn_data = { |
---|
241 | softc_ptr->irq_number, |
---|
242 | mpc83xx_i2c_irq_handler, /* rtems_irq_hdl */ |
---|
243 | (rtems_irq_hdl_param)softc_ptr, /* (rtems_irq_hdl_param) */ |
---|
244 | mpc83xx_i2c_irq_on_off, /* (rtems_irq_enable) */ |
---|
245 | mpc83xx_i2c_irq_on_off, /* (rtems_irq_disable) */ |
---|
246 | mpc83xx_i2c_irq_isOn /* (rtems_irq_is_enabled) */ |
---|
247 | }; |
---|
248 | |
---|
249 | /* |
---|
250 | * (un-)install handler for I2C device |
---|
251 | */ |
---|
252 | if (install) { |
---|
253 | /* |
---|
254 | * create semaphore for IRQ synchronization |
---|
255 | */ |
---|
256 | rc = rtems_semaphore_create(rtems_build_name('i','2','c','s'), |
---|
257 | 0, |
---|
258 | RTEMS_FIFO |
---|
259 | | RTEMS_SIMPLE_BINARY_SEMAPHORE, |
---|
260 | 0, |
---|
261 | &softc_ptr->irq_sema_id); |
---|
262 | if (rc != RTEMS_SUCCESSFUL) { |
---|
263 | rtems_panic("I2C: cannot create semaphore"); |
---|
264 | } |
---|
265 | if (!BSP_install_rtems_irq_handler (&irq_conn_data)) { |
---|
266 | rtems_panic("I2C: cannot install IRQ handler"); |
---|
267 | } |
---|
268 | } |
---|
269 | else { |
---|
270 | if (!BSP_remove_rtems_irq_handler (&irq_conn_data)) { |
---|
271 | rtems_panic("I2C: cannot uninstall IRQ handler"); |
---|
272 | } |
---|
273 | /* |
---|
274 | * delete sync semaphore |
---|
275 | */ |
---|
276 | if (softc_ptr->irq_sema_id != 0) { |
---|
277 | rc = rtems_semaphore_delete(softc_ptr->irq_sema_id); |
---|
278 | if (rc != RTEMS_SUCCESSFUL) { |
---|
279 | rtems_panic("I2C: cannot delete semaphore"); |
---|
280 | } |
---|
281 | } |
---|
282 | } |
---|
283 | } |
---|
284 | |
---|
285 | /*=========================================================================*\ |
---|
286 | | Function: | |
---|
287 | \*-------------------------------------------------------------------------*/ |
---|
288 | static rtems_status_code mpc83xx_i2c_init |
---|
289 | ( |
---|
290 | /*-------------------------------------------------------------------------*\ |
---|
291 | | Purpose: | |
---|
292 | | initialize the driver | |
---|
293 | +---------------------------------------------------------------------------+ |
---|
294 | | Input Parameters: | |
---|
295 | \*-------------------------------------------------------------------------*/ |
---|
296 | rtems_libi2c_bus_t *bh /* bus specifier structure */ |
---|
297 | ) |
---|
298 | /*-------------------------------------------------------------------------*\ |
---|
299 | | Return Value: | |
---|
300 | | o = ok or error code | |
---|
301 | \*=========================================================================*/ |
---|
302 | { |
---|
303 | mpc83xx_i2c_softc_t *softc_ptr = &(((mpc83xx_i2c_desc_t *)(bh))->softc); |
---|
304 | uint8_t fdr_val; |
---|
305 | int errval; |
---|
306 | #if defined(DEBUG) |
---|
307 | printk("mpc83xx_i2c_init called... "); |
---|
308 | #endif |
---|
309 | /* |
---|
310 | * init HW registers |
---|
311 | */ |
---|
312 | /* |
---|
313 | * init frequency divider to 100kHz |
---|
314 | */ |
---|
315 | errval = mpc83xx_i2c_find_clock_divider(&fdr_val, |
---|
316 | BSP_CSB_CLK_FRQ/3/100000); |
---|
317 | if (errval != 0) { |
---|
318 | return errval; |
---|
319 | } |
---|
320 | softc_ptr->reg_ptr->i2cfdr = fdr_val; |
---|
321 | /* |
---|
322 | * init digital filter sampling rate |
---|
323 | */ |
---|
324 | softc_ptr->reg_ptr->i2cdfsrr = 0x10 ; /* no special filtering needed */ |
---|
325 | /* |
---|
326 | * set own slave address to broadcast (0x00) |
---|
327 | */ |
---|
328 | softc_ptr->reg_ptr->i2cadr = 0x00 ; |
---|
329 | |
---|
330 | /* |
---|
331 | * set control register to module enable |
---|
332 | */ |
---|
333 | softc_ptr->reg_ptr->i2ccr = MPC83XX_I2CCR_MEN; |
---|
334 | |
---|
335 | /* |
---|
336 | * init interrupt stuff |
---|
337 | */ |
---|
338 | mpc83xx_i2c_install_irq_handler(softc_ptr,TRUE); |
---|
339 | |
---|
340 | /* |
---|
341 | * mark, that we have initialized |
---|
342 | */ |
---|
343 | softc_ptr->initialized = TRUE; |
---|
344 | #if defined(DEBUG) |
---|
345 | printk("... exit OK\r\n"); |
---|
346 | #endif |
---|
347 | return RTEMS_SUCCESSFUL; |
---|
348 | } |
---|
349 | |
---|
350 | /*=========================================================================*\ |
---|
351 | | Function: | |
---|
352 | \*-------------------------------------------------------------------------*/ |
---|
353 | static rtems_status_code mpc83xx_i2c_send_start |
---|
354 | ( |
---|
355 | /*-------------------------------------------------------------------------*\ |
---|
356 | | Purpose: | |
---|
357 | | send a start condition to bus | |
---|
358 | +---------------------------------------------------------------------------+ |
---|
359 | | Input Parameters: | |
---|
360 | \*-------------------------------------------------------------------------*/ |
---|
361 | rtems_libi2c_bus_t *bh /* bus specifier structure */ |
---|
362 | ) |
---|
363 | /*-------------------------------------------------------------------------*\ |
---|
364 | | Return Value: | |
---|
365 | | o = ok or error code | |
---|
366 | \*=========================================================================*/ |
---|
367 | { |
---|
368 | mpc83xx_i2c_softc_t *softc_ptr = &(((mpc83xx_i2c_desc_t *)(bh))->softc); |
---|
369 | |
---|
370 | #if defined(DEBUG) |
---|
371 | printk("mpc83xx_i2c_send_start called... "); |
---|
372 | #endif |
---|
373 | if (0 != (softc_ptr->reg_ptr->i2ccr & MPC83XX_I2CCR_MSTA)) { |
---|
374 | /* |
---|
375 | * already started, so send a "repeated start" |
---|
376 | */ |
---|
377 | softc_ptr->reg_ptr->i2ccr |= MPC83XX_I2CCR_RSTA; |
---|
378 | } |
---|
379 | else { |
---|
380 | softc_ptr->reg_ptr->i2ccr |= MPC83XX_I2CCR_MSTA; |
---|
381 | } |
---|
382 | |
---|
383 | #if defined(DEBUG) |
---|
384 | printk("... exit OK\r\n"); |
---|
385 | #endif |
---|
386 | return 0; |
---|
387 | } |
---|
388 | |
---|
389 | /*=========================================================================*\ |
---|
390 | | Function: | |
---|
391 | \*-------------------------------------------------------------------------*/ |
---|
392 | static rtems_status_code mpc83xx_i2c_send_stop |
---|
393 | ( |
---|
394 | /*-------------------------------------------------------------------------*\ |
---|
395 | | Purpose: | |
---|
396 | | send a stop condition to bus | |
---|
397 | +---------------------------------------------------------------------------+ |
---|
398 | | Input Parameters: | |
---|
399 | \*-------------------------------------------------------------------------*/ |
---|
400 | rtems_libi2c_bus_t *bh /* bus specifier structure */ |
---|
401 | ) |
---|
402 | /*-------------------------------------------------------------------------*\ |
---|
403 | | Return Value: | |
---|
404 | | o = ok or error code | |
---|
405 | \*=========================================================================*/ |
---|
406 | { |
---|
407 | mpc83xx_i2c_softc_t *softc_ptr = &(((mpc83xx_i2c_desc_t *)(bh))->softc); |
---|
408 | |
---|
409 | #if defined(DEBUG) |
---|
410 | printk("mpc83xx_i2c_send_stop called... "); |
---|
411 | #endif |
---|
412 | softc_ptr->reg_ptr->i2ccr &= ~MPC83XX_I2CCR_MSTA; |
---|
413 | |
---|
414 | #if defined(DEBUG) |
---|
415 | printk("... exit OK\r\n"); |
---|
416 | #endif |
---|
417 | return 0; |
---|
418 | } |
---|
419 | |
---|
420 | /*=========================================================================*\ |
---|
421 | | Function: | |
---|
422 | \*-------------------------------------------------------------------------*/ |
---|
423 | static rtems_status_code mpc83xx_i2c_send_addr |
---|
424 | ( |
---|
425 | /*-------------------------------------------------------------------------*\ |
---|
426 | | Purpose: | |
---|
427 | | address a slave device on the bus | |
---|
428 | +---------------------------------------------------------------------------+ |
---|
429 | | Input Parameters: | |
---|
430 | \*-------------------------------------------------------------------------*/ |
---|
431 | rtems_libi2c_bus_t *bh, /* bus specifier structure */ |
---|
432 | uint32_t addr, /* address to send on bus */ |
---|
433 | int rw /* 0=write,1=read */ |
---|
434 | ) |
---|
435 | /*-------------------------------------------------------------------------*\ |
---|
436 | | Return Value: | |
---|
437 | | o = ok or error code | |
---|
438 | \*=========================================================================*/ |
---|
439 | { |
---|
440 | mpc83xx_i2c_softc_t *softc_ptr = &(((mpc83xx_i2c_desc_t *)(bh))->softc); |
---|
441 | rtems_boolean long_addr = FALSE; |
---|
442 | uint8_t addr_byte; |
---|
443 | rtems_status_code rc; |
---|
444 | |
---|
445 | #if defined(DEBUG) |
---|
446 | printk("mpc83xx_i2c_send_addr called... "); |
---|
447 | #endif |
---|
448 | softc_ptr->reg_ptr->i2ccr |= MPC83XX_I2CCR_MTX; |
---|
449 | /* |
---|
450 | * determine, whether short or long address is needed, determine rd/wr |
---|
451 | */ |
---|
452 | if (addr > 0x7f) { |
---|
453 | long_addr = TRUE; |
---|
454 | addr_byte = (0xf0 |
---|
455 | | ((addr >> 7) & 0x06) |
---|
456 | | ((rw) ? 1 : 0)); |
---|
457 | /* |
---|
458 | * send first byte |
---|
459 | */ |
---|
460 | softc_ptr->reg_ptr->i2cdr = addr_byte; |
---|
461 | /* |
---|
462 | * wait for successful transfer |
---|
463 | */ |
---|
464 | rc = mpc83xx_i2c_wait(softc_ptr, |
---|
465 | MPC83XX_I2CSR_MCF, |
---|
466 | MPC83XX_I2CSR_MCF); |
---|
467 | if (rc != RTEMS_SUCCESSFUL) { |
---|
468 | #if defined(DEBUG) |
---|
469 | printk("... exit rc=%d\r\n",rc); |
---|
470 | #endif |
---|
471 | return rc; |
---|
472 | } |
---|
473 | } |
---|
474 | addr_byte = (0xf0 |
---|
475 | | ((addr >> 7) & 0x06) |
---|
476 | | ((rw) ? 1 : 0)); |
---|
477 | /* |
---|
478 | * send (final) byte |
---|
479 | */ |
---|
480 | addr_byte = ((addr << 1) |
---|
481 | | ((rw) ? 1 : 0)); |
---|
482 | |
---|
483 | softc_ptr->reg_ptr->i2cdr = addr_byte; |
---|
484 | /* |
---|
485 | * wait for successful transfer |
---|
486 | */ |
---|
487 | rc = mpc83xx_i2c_wait(softc_ptr, |
---|
488 | MPC83XX_I2CSR_MCF, |
---|
489 | MPC83XX_I2CSR_MCF); |
---|
490 | |
---|
491 | #if defined(DEBUG) |
---|
492 | printk("... exit rc=%d\r\n",rc); |
---|
493 | #endif |
---|
494 | return rc; |
---|
495 | } |
---|
496 | |
---|
497 | /*=========================================================================*\ |
---|
498 | | Function: | |
---|
499 | \*-------------------------------------------------------------------------*/ |
---|
500 | static int mpc83xx_i2c_read_bytes |
---|
501 | ( |
---|
502 | /*-------------------------------------------------------------------------*\ |
---|
503 | | Purpose: | |
---|
504 | | receive some bytes from I2C device | |
---|
505 | +---------------------------------------------------------------------------+ |
---|
506 | | Input Parameters: | |
---|
507 | \*-------------------------------------------------------------------------*/ |
---|
508 | rtems_libi2c_bus_t *bh, /* bus specifier structure */ |
---|
509 | unsigned char *buf, /* buffer to store bytes */ |
---|
510 | int len /* number of bytes to receive */ |
---|
511 | ) |
---|
512 | /*-------------------------------------------------------------------------*\ |
---|
513 | | Return Value: | |
---|
514 | | number of bytes received or (negative) error code | |
---|
515 | \*=========================================================================*/ |
---|
516 | { |
---|
517 | mpc83xx_i2c_softc_t *softc_ptr = &(((mpc83xx_i2c_desc_t *)(bh))->softc); |
---|
518 | rtems_status_code rc; |
---|
519 | unsigned char *p = buf; |
---|
520 | unsigned char dummy; |
---|
521 | |
---|
522 | #if defined(DEBUG) |
---|
523 | printk("mpc83xx_i2c_read_bytes called... "); |
---|
524 | #endif |
---|
525 | softc_ptr->reg_ptr->i2ccr &= ~MPC83XX_I2CCR_MTX; |
---|
526 | softc_ptr->reg_ptr->i2ccr &= ~MPC83XX_I2CCR_TXAK; |
---|
527 | /* |
---|
528 | * we need a dummy transfer here to start the first read |
---|
529 | */ |
---|
530 | dummy = softc_ptr->reg_ptr->i2cdr; |
---|
531 | |
---|
532 | while (len-- > 0) { |
---|
533 | if (len == 0) { |
---|
534 | /* |
---|
535 | * last byte is not acknowledged |
---|
536 | */ |
---|
537 | softc_ptr->reg_ptr->i2ccr |= MPC83XX_I2CCR_TXAK; |
---|
538 | } |
---|
539 | /* |
---|
540 | * wait 'til end of transfer |
---|
541 | */ |
---|
542 | rc = mpc83xx_i2c_wait(softc_ptr, |
---|
543 | MPC83XX_I2CSR_MCF, |
---|
544 | MPC83XX_I2CSR_MCF); |
---|
545 | if (rc != RTEMS_SUCCESSFUL) { |
---|
546 | #if defined(DEBUG) |
---|
547 | printk("... exit rc=%d\r\n",-rc); |
---|
548 | #endif |
---|
549 | return -rc; |
---|
550 | } |
---|
551 | *p++ = softc_ptr->reg_ptr->i2cdr; |
---|
552 | |
---|
553 | } |
---|
554 | #if defined(DEBUG) |
---|
555 | printk("... exit OK, rc=%d\r\n",p-buf); |
---|
556 | #endif |
---|
557 | return p - buf; |
---|
558 | } |
---|
559 | |
---|
560 | /*=========================================================================*\ |
---|
561 | | Function: | |
---|
562 | \*-------------------------------------------------------------------------*/ |
---|
563 | static int mpc83xx_i2c_write_bytes |
---|
564 | ( |
---|
565 | /*-------------------------------------------------------------------------*\ |
---|
566 | | Purpose: | |
---|
567 | | send some bytes to I2C device | |
---|
568 | +---------------------------------------------------------------------------+ |
---|
569 | | Input Parameters: | |
---|
570 | \*-------------------------------------------------------------------------*/ |
---|
571 | rtems_libi2c_bus_t *bh, /* bus specifier structure */ |
---|
572 | unsigned char *buf, /* buffer to send */ |
---|
573 | int len /* number of bytes to send */ |
---|
574 | |
---|
575 | ) |
---|
576 | /*-------------------------------------------------------------------------*\ |
---|
577 | | Return Value: | |
---|
578 | | number of bytes sent or (negative) error code | |
---|
579 | \*=========================================================================*/ |
---|
580 | { |
---|
581 | mpc83xx_i2c_softc_t *softc_ptr = &(((mpc83xx_i2c_desc_t *)(bh))->softc); |
---|
582 | rtems_status_code rc; |
---|
583 | unsigned char *p = buf; |
---|
584 | |
---|
585 | #if defined(DEBUG) |
---|
586 | printk("mpc83xx_i2c_write_bytes called... "); |
---|
587 | #endif |
---|
588 | softc_ptr->reg_ptr->i2ccr = |
---|
589 | (softc_ptr->reg_ptr->i2ccr & ~MPC83XX_I2CCR_TXAK) | MPC83XX_I2CCR_MTX; |
---|
590 | while (len-- > 0) { |
---|
591 | softc_ptr->reg_ptr->i2cdr = *p++; |
---|
592 | /* |
---|
593 | * wait 'til end of transfer |
---|
594 | */ |
---|
595 | rc = mpc83xx_i2c_wait(softc_ptr, |
---|
596 | MPC83XX_I2CSR_MCF, |
---|
597 | MPC83XX_I2CSR_MCF); |
---|
598 | if (rc != RTEMS_SUCCESSFUL) { |
---|
599 | #if defined(DEBUG) |
---|
600 | printk("... exit rc=%d\r\n",-rc); |
---|
601 | #endif |
---|
602 | return -rc; |
---|
603 | } |
---|
604 | } |
---|
605 | #if defined(DEBUG) |
---|
606 | printk("... exit OK, rc=%d\r\n",p-buf); |
---|
607 | #endif |
---|
608 | return p - buf; |
---|
609 | } |
---|
610 | |
---|
611 | rtems_libi2c_bus_ops_t mpc83xx_i2c_ops = { |
---|
612 | init: mpc83xx_i2c_init, |
---|
613 | send_start: mpc83xx_i2c_send_start, |
---|
614 | send_stop: mpc83xx_i2c_send_stop, |
---|
615 | send_addr: mpc83xx_i2c_send_addr, |
---|
616 | read_bytes: mpc83xx_i2c_read_bytes, |
---|
617 | write_bytes: mpc83xx_i2c_write_bytes, |
---|
618 | }; |
---|
619 | |
---|