/* * Common Code for Vectoring MIPS Exceptions * * The actual decoding of the cause register and vector number assignment * is CPU model specific. * * $Id$ */ #include #include #include #include "iregdef.h" #include "idtcpu.h" #include char *cause_strings[32] = { /* 0 */ "Int", /* 1 */ "TLB Mods", /* 2 */ "TLB Load", /* 3 */ "TLB Store", /* 4 */ "Address Load", /* 5 */ "Address Store", /* 6 */ "Instruction Bus Error", /* 7 */ "Data Bus Error", /* 9 */ "Syscall", /* 10 */ "Breakpoint", /* 11 */ "Reserved Instruction", /* 12 */ "Coprocessor Unuseable", /* 13 */ "Overflow", /* 14 */ "Trap", /* 15 */ "Instruction Virtual Coherency Error", /* 16 */ "FP Exception", /* 17 */ "Reserved 17", /* 18 */ "Reserved 17", /* 19 */ "Reserved 17", /* 20 */ "Reserved 20", /* 21 */ "Reserved 21", /* 22 */ "Reserved 22", /* 23 */ "Watch", /* 24 */ "Reserved 24", /* 25 */ "Reserved 25", /* 26 */ "Reserved 26", /* 27 */ "Reserved 27", /* 28 */ "Reserved 28", /* 29 */ "Reserved 29", /* 30 */ "Reserved 30", /* 31 */ "Data Virtual Coherency Error" }; struct regdef { int offset; char *name; }; struct regdef dumpregs[]= { { R_RA, "R_RA" }, { R_V0, "R_V0" }, { R_V1, "R_V1" }, { R_A0, "R_A0" }, { R_A1, "R_A1" }, { R_A2, "R_A2" }, { R_A3, "R_A3" }, { R_T0, "R_T0" }, { R_T1, "R_T1" }, { R_T2, "R_T2" }, { R_T3, "R_T3" }, { R_T4, "R_T4" }, { R_T5, "R_T5" }, { R_T6, "R_T6" }, { R_T7, "R_T7" }, { R_T8, "R_T8" }, { R_MDLO, "R_MDLO" }, { R_MDHI, "R_MDHI" }, { R_GP, "R_GP" }, { R_FP, "R_FP" }, { R_AT, "R_AT" }, { R_EPC,"R_EPC"}, { -1, NULL } }; void mips_dump_exception_frame( CPU_Interrupt_frame *frame ) { unsigned int *frame_u32; int i, j; frame_u32 = (uint32_t *)frame; for(i=0; dumpregs[i].offset > -1; i++) { printk(" %s", dumpregs[i].name); for(j=0; j< 7-strlen(dumpregs[i].name); j++) printk(" "); printk(" %08X%c", frame_u32[dumpregs[i].offset], (i%3) ? '\t' : '\n' ); } printk( "\n" ); } void mips_default_exception_code_handler( int exc, CPU_Interrupt_frame *frame ) { unsigned int sr; unsigned int cause; mips_get_sr( sr ); mips_get_cause( cause ); printk( "Unhandled exception %d\n", exc ); printk( "sr: 0x%08x cause: 0x%08x --> %s\n", sr, cause, cause_strings[(cause >> 2) &0x1f] ); mips_dump_exception_frame( frame ); rtems_fatal_error_occurred(1); } #define CALL_EXC(_vector,_frame) \ do { \ if ( _ISR_Vector_table[_vector] ) \ (_ISR_Vector_table[_vector])(_vector,_frame); \ else \ mips_default_exception_code_handler( _vector, _frame ); \ } while(0) /* * There are constants defined for these but they should basically * all be close to the same set. */ void mips_vector_exceptions( CPU_Interrupt_frame *frame ) { uint32_t cause; uint32_t exc; mips_get_cause( cause ); exc = (cause >> 2) & 0x1f; CALL_EXC( exc, frame ); }