[479ac2d8] | 1 | /* |
---|
| 2 | * S3C2400 clock specific using the System Timer |
---|
| 3 | * |
---|
| 4 | * This is hardware specific part of the clock driver. At the end of this |
---|
| 5 | * file, the generic part of the driver is #included. |
---|
| 6 | * |
---|
| 7 | * The license and distribution terms for this file may be |
---|
| 8 | * found in the file LICENSE in this distribution or at |
---|
| 9 | * |
---|
| 10 | * http://www.OARcorp.com/rtems/license.html. |
---|
| 11 | * |
---|
| 12 | * |
---|
| 13 | * $Id$ |
---|
| 14 | */ |
---|
| 15 | #include <rtems.h> |
---|
| 16 | #include <irq.h> |
---|
| 17 | #include <bsp.h> |
---|
| 18 | #include <s3c2400.h> |
---|
| 19 | |
---|
| 20 | /* this is defined in ../../../shared/clockdrv_shell.c */ |
---|
| 21 | rtems_isr Clock_isr(rtems_vector_number vector); |
---|
| 22 | static void clock_isr_on(const rtems_irq_connect_data *unused); |
---|
| 23 | static void clock_isr_off(const rtems_irq_connect_data *unused); |
---|
| 24 | static int clock_isr_is_on(const rtems_irq_connect_data *irq); |
---|
| 25 | |
---|
| 26 | /* Replace the first value with the clock's interrupt name. */ |
---|
| 27 | rtems_irq_connect_data clock_isr_data = {BSP_INT_TIMER4, |
---|
| 28 | (rtems_irq_hdl)Clock_isr, |
---|
| 29 | clock_isr_on, |
---|
| 30 | clock_isr_off, |
---|
| 31 | clock_isr_is_on, |
---|
| 32 | 3, /* unused for ARM cpus */ |
---|
| 33 | 0 }; /* unused for ARM cpus */ |
---|
| 34 | |
---|
| 35 | /* If you follow the code, this is never used, so any value |
---|
| 36 | * should work |
---|
| 37 | */ |
---|
| 38 | #define CLOCK_VECTOR 0 |
---|
| 39 | |
---|
| 40 | |
---|
| 41 | /** |
---|
| 42 | * When we get the clock interrupt |
---|
| 43 | * - clear the interrupt bit? |
---|
| 44 | * - restart the timer? |
---|
| 45 | */ |
---|
| 46 | #define Clock_driver_support_at_tick() \ |
---|
| 47 | do { \ |
---|
| 48 | ClearPending(BIT_TIMER4); \ |
---|
| 49 | } while(0) |
---|
| 50 | |
---|
| 51 | |
---|
| 52 | /** |
---|
| 53 | * Installs the clock ISR. You shouldn't need to change this. |
---|
| 54 | */ |
---|
| 55 | #define Clock_driver_support_install_isr( _new, _old ) \ |
---|
| 56 | do { \ |
---|
| 57 | BSP_install_rtems_irq_handler(&clock_isr_data); \ |
---|
| 58 | } while(0) |
---|
| 59 | |
---|
| 60 | |
---|
| 61 | /** |
---|
| 62 | * Initialize the hardware for the clock |
---|
| 63 | * - Set the frequency |
---|
| 64 | * - enable it |
---|
| 65 | * - clear any pending interrupts |
---|
| 66 | * |
---|
| 67 | * Since you may want the clock always running, you can |
---|
| 68 | * enable interrupts here. If you do so, the clock_isr_on(), |
---|
| 69 | * clock_isr_off(), and clock_isr_is_on() functions can be |
---|
| 70 | * NOPs. |
---|
| 71 | */ |
---|
| 72 | #define Clock_driver_support_initialize_hardware() \ |
---|
| 73 | do { \ |
---|
| 74 | uint32_t cr; \ |
---|
| 75 | uint32_t freq,m,p,s; \ |
---|
| 76 | /* set MUX for Timer4 to 1/16 */ \ |
---|
| 77 | cr=rTCFG1 & 0xFFF0FFFF; \ |
---|
| 78 | rTCFG1=(cr | (3<<16)); \ |
---|
| 79 | /* compute MPLL freq */ \ |
---|
| 80 | m = M_MDIV + 8; \ |
---|
| 81 | p = M_PDIV + 2; \ |
---|
| 82 | s = M_SDIV; \ |
---|
| 83 | freq =(BSP_OSC_FREQ * m) / (p << s); \ |
---|
| 84 | /* PCLK = MPLL/4 */ \ |
---|
| 85 | freq = freq / 4; \ |
---|
| 86 | /* set TIMER4 counter, input freq=PLCK/16/16Mhz*/ \ |
---|
| 87 | freq = (freq /16)/16; \ |
---|
| 88 | rTCNTB4 = ((freq / 1000) * BSP_Configuration.microseconds_per_tick) / 1000; \ |
---|
| 89 | /*unmask TIMER4 irq*/ \ |
---|
| 90 | rINTMSK&=~BIT_TIMER4; \ |
---|
| 91 | /* start TIMER4 with autoreload */ \ |
---|
| 92 | cr=rTCON & 0xFF8FFFFF; \ |
---|
| 93 | rTCON=(cr|(0x6<<20)); \ |
---|
| 94 | rTCON=(cr|(0x5<<20)); \ |
---|
| 95 | } while (0) |
---|
| 96 | |
---|
| 97 | /** |
---|
| 98 | * Do whatever you need to shut the clock down and remove the |
---|
| 99 | * interrupt handler. Since this normally only gets called on |
---|
| 100 | * RTEMS shutdown, you may not need to do anything other than |
---|
| 101 | * remove the ISR. |
---|
| 102 | */ |
---|
| 103 | #define Clock_driver_support_shutdown_hardware() \ |
---|
| 104 | do { \ |
---|
| 105 | /* Disable timer */ \ |
---|
| 106 | BSP_remove_rtems_irq_handler(&clock_isr_data); \ |
---|
| 107 | } while (0) |
---|
| 108 | |
---|
| 109 | /** |
---|
| 110 | * Enables clock interrupt. |
---|
| 111 | * |
---|
| 112 | * If the interrupt is always on, this can be a NOP. |
---|
| 113 | */ |
---|
| 114 | static void clock_isr_on(const rtems_irq_connect_data *unused) |
---|
| 115 | { |
---|
| 116 | return; |
---|
| 117 | } |
---|
| 118 | |
---|
| 119 | /** |
---|
| 120 | * Disables clock interrupts |
---|
| 121 | * |
---|
| 122 | * If the interrupt is always on, this can be a NOP. |
---|
| 123 | */ |
---|
| 124 | static void clock_isr_off(const rtems_irq_connect_data *unused) |
---|
| 125 | { |
---|
| 126 | return; |
---|
| 127 | } |
---|
| 128 | |
---|
| 129 | /** |
---|
| 130 | * Tests to see if clock interrupt is enabled, and returns 1 if so. |
---|
| 131 | * If interrupt is not enabled, returns 0. |
---|
| 132 | * |
---|
| 133 | * If the interrupt is always on, this always returns 1. |
---|
| 134 | */ |
---|
| 135 | static int clock_isr_is_on(const rtems_irq_connect_data *irq) |
---|
| 136 | { |
---|
| 137 | return 1; |
---|
| 138 | } |
---|
| 139 | |
---|
| 140 | |
---|
| 141 | /* Make sure to include this, and only at the end of the file */ |
---|
| 142 | #include "../../../../libbsp/shared/clockdrv_shell.c" |
---|