source: rtems/c/src/lib/libbsp/sparc/erc32/configure.ac @ 6b2b37d2

4.104.115
Last change on this file since 6b2b37d2 was 6b2b37d2, checked in by Ralf Corsepius <ralf.corsepius@…>, on 09/15/09 at 14:45:47

2009-09-15 Ralf Corsépius <ralf.corsepius@…>

  • configure.ac: Remove RTEMS_BSP_BOOTCARD_OPTIONS.
  • Property mode set to 100644
File size: 1.8 KB
Line 
1## Process this file with autoconf to produce a configure script.
2##
3## $Id$
4
5AC_PREREQ(2.60)
6AC_INIT([rtems-c-src-lib-libbsp-sparc-erc32],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
7AC_CONFIG_SRCDIR([bsp_specs])
8RTEMS_TOP(../../../../../..)
9
10RTEMS_CANONICAL_TARGET_CPU
11AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
12RTEMS_BSP_CONFIGURE
13
14RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
15RTEMS_CANONICALIZE_TOOLS
16RTEMS_PROG_CCAS
17
18RTEMS_CHECK_NETWORKING
19
20AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
21
22RTEMS_CONFIG_BUILD_SUBDIRS(tools)
23
24## bsp-specific options
25RTEMS_BSPOPTS_SET([CONSOLE_USE_INTERRUPTS],[*],[0])
26RTEMS_BSPOPTS_HELP([CONSOLE_USE_INTERRUPTS],
27[The erc32 console driver can operate in either polled or interrupt mode.
28Under the simulator (especially when FAST_UART is defined), polled seems to operate
29better.  It is common for a task to print a line (like the end of test message) and
30then exit.  In this case, the program returns control to the simulator command line
31before the program has even queued the output to the uart.  Thus sis has no chance
32of getting the data out.])
33
34RTEMS_BSPOPTS_SET([SIMSPARC_FAST_IDLE],[*],[])
35RTEMS_BSPOPTS_HELP([SIMSPARC_FAST_IDLE],
36[If defined, speed up the clock ticks while the idle task is running so
37 time spent in the idle task is minimized.  This significantly reduces
38 the wall time required to execute the RTEMS test suites.])
39
40RTEMS_BSPOPTS_SET([ENABLE_SIS_QUIRKS],[sis],[1])
41RTEMS_BSPOPTS_SET([ENABLE_SIS_QUIRKS],[*],[0])
42RTEMS_BSPOPTS_HELP([ENABLE_SIS_QUIRKS],
43[If defined, then the SIS simulator specific code in the
44 BSP will be enabled.  In particular, SIS requires special
45 initialization not used on real ERC32 hardware.])
46
47RTEMS_BSP_CLEANUP_OPTIONS(0,0)
48
49# Explicitly list all Makefiles here
50AC_CONFIG_FILES([Makefile])
51AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.