source: rtems/c/src/lib/libbsp/sparc/ChangeLog @ 1b0c3e6c

4.8
Last change on this file since 1b0c3e6c was 1b0c3e6c, checked in by Joel Sherrill <joel.sherrill@…>, on 12/05/07 at 15:49:40

2007-12-05 Daniel Hellstrom <daniel@…>

  • Makefile.am: i2c should be on branch as well as CVS head.
  • shared/i2c/i2cmst.c, shared/include/i2cmst.h: New files.
  • Property mode set to 100644
File size: 10.2 KB
Line 
12007-12-05      Daniel Hellstrom <daniel@gaisler.com>
2
3        * Makefile.am: i2c should be on branch as well as CVS head.
4        * shared/i2c/i2cmst.c, shared/include/i2cmst.h: New files.
5
62007-12-05      Daniel Hellstrom <daniel@gaisler.com>
7
8        * shared/include/ambapp.h: Sync head and 4.8 branch.
9
102007-11-30      Daniel Hellstrom <daniel@gaisler.com>
11
12        * shared/include/grspw.h, shared/spw/grspw.c: GRSPW SpaceWire Driver.
13        Fixes typecast to volatile integer instead of to integer. Added
14        scanning for GRSPW2 Core, The GRSPW2 core is run in legacy mode.
15
162007-11-30      Daniel Hellstrom <daniel@gaisler.com>
17
18        * shared/can/occan.c: LEON2/3 OCCAN CAN driver. Fixes typecast to
19        volatile integer where needed. Fixes bug where closing the driver and
20        opening it again could make the driver not starting transmission due
21        to the software fifo was not cleared.
22
232007-11-30      Daniel Hellstrom <daniel@gaisler.com>
24
25        * shared/can/grcan.c, shared/can/grcan_rasta.c,
26        shared/include/ambapp.h: GRCAN CAN driver. Fixes Interrupt
27        enabling/disabling in the driver, interrupt may not be restored
28        correctly. Implements the baud rate calculation routine. Removed
29        unnecessary printk. Fixed scanning to support GRCAN and GRHCAN
30        hardware. Added GRCAN device number to ambapp.h.
31
322007-10-11      Daniel Hellstrom <daniel@gaisler.com>
33
34        * shared/can/occan.c: Fixes bug in OC-CAN baud rate calculator. The
35        BTR1 8-bit value was swapped.
36
372007-09-21      Daniel Hellstrom <daniel@gaisler.com>
38
39        * shared/can/occan.c: Fix warning on Diab compiler.
40
412007-09-19      Daniel Hellstrom <daniel@gaisler.com>
42
43        * shared/can/occan.c: Fix Reenable command and fix typo.
44
452007-09-18      Joel Sherrill <joel.sherrill@OARcorp.com>
46
47        * shared/1553/b1553brm.c, shared/can/grcan.c: Remove include of sched.h
48
492007-09-13      Joel Sherrill <joel.sherrill@OARcorp.com>
50
51        * shared/spw/grspw.c: Remove include of sched.h. It does not appear to
52        be needed and is unavailable when POSIX is disabled.
53
542007-09-12      Daniel Hellstrom <daniel@gaisler.com>
55
56        * shared/can/grcan.c, shared/include/debug_defs.h, shared/spw/grspw.c:
57        Remove use of DEBUG_printf.
58
592007-09-07      Daniel Hellstrom <daniel@gaisler.com>
60
61        * shared/1553/b1553brm.c, shared/can/grcan.c, shared/can/grcan_rasta.c,
62        shared/can/occan.c, shared/spw/grspw.c, shared/spw/grspw_pci.c,
63        shared/uart/apbuart.c: Remove warnings.
64
652007-09-06      Daniel Hellstrom <daniel@gaisler.com>
66
67        * shared/pci/pcifinddevice.c: New file.
68
692007-09-06      Joel Sherrill <joel.sherrill@OARcorp.com>
70
71        * shared/uart/apbuart.c: Fix some warnings.
72
732007-09-06      Daniel Hellstrom <daniel@gaisler.com>
74
75        New drivers: PCI, b1553BRM, SpaceWire(GRSPW), CAN (GRCAN,OC_CAN),
76        Raw UART.
77        * shared/1553/b1553brm.c, shared/1553/b1553brm_pci.c,
78        shared/1553/b1553brm_rasta.c, shared/can/grcan.c,
79        shared/can/grcan_rasta.c, shared/can/occan.c, shared/can/occan_pci.c,
80        shared/spw/grspw.c, shared/spw/grspw_pci.c, shared/spw/grspw_rasta.c,
81        shared/uart/apbuart.c, shared/uart/apbuart_pci.c,
82        shared/uart/apbuart_rasta.c: New files missed in previous commit.
83
842007-09-06      Daniel Hellstrom <daniel@gaisler.com>
85
86        * Makefile.am: Add the following new drivers: PCI, b1553BRM,
87        SpaceWire(GRSPW), CAN (GRCAN,OC_CAN), Raw UART.
88        * shared/include/apbuart.h, shared/include/apbuart_pci.h,
89        shared/include/apbuart_rasta.h, shared/include/b1553brm.h,
90        shared/include/b1553brm_pci.h, shared/include/b1553brm_rasta.h,
91        shared/include/debug_defs.h, shared/include/grcan.h,
92        shared/include/grcan_rasta.h, shared/include/grcan_spwrtc.h,
93        shared/include/grspw.h, shared/include/grspw_pci.h,
94        shared/include/grspw_rasta.h, shared/include/occan.h,
95        shared/include/occan_pci.h, shared/include/pci.h: New files.
96
97
982007-09-05      Daniel Hellstrom <daniel@gaisler.com>
99
100        * shared/bspstart.c: LEON2 and LEON3 Data cache snooping detection on
101        startup, for drivers. (LEON2,3 are configurable processors, they can
102        be with or without DCache snooping. Caches without snooping needs the
103        drivers to flush cache or use the sparc instruction lda to force
104        cache miss...)
105
1062007-09-05      Daniel Hellstrom <daniel@gaisler.com>
107
108        * shared/amba/ambapp.c, shared/include/ambapp.h: New files.
109
1102007-09-05      Daniel Hellstrom <daniel@gaisler.com>
111
112        * Makefile.am: LEON3 AMBA PnP bus scanning moved to shared/amba/amba.c
113        and shared/include/ambapp.h. The AMBA scanning was improved to take
114        account for PnP info address translation. This is useful when
115        scanning remote AMBA busses for example when a board connected with
116        PCI has an AMBA bus that needs to be scanned, before the addresses
117        was hard coded. Also, LEON2 now have AMBA PnP bus scanning support.
118        By using the new AMBA scanning routines it is possible to isolate the
119        AMBA scanning code to ambapp.c, however existing drivers should be
120        updated to use them in order to save space.
121
1222007-05-15      Joel Sherrill <joel.sherrill@oarcorp.com>
123
124        * shared/bspstart.c: Add include <rtems/bspIo.h> to remove warning.
125
1262007-05-09      Joel Sherrill <joel.sherrill@OARcorp.com>
127
128        * shared/bspstart.c, shared/gnatcommon.c: Remove debug print methods
129        that are redundant with prntk and replace their use with printk.
130
1312007-04-17      Joel Sherrill <joel@OARcorp.com>
132
133        * erc32/tools/runtest.in, leon2/tools/runtest.in,
134        leon3/tools/runtest.in: Do not run pppd.exe from batch mode script.
135
1362007-03-11      Joel Sherrill <joel@OARcorp.com>
137
138        * shared/bspstart.c: Remove assignments of
139        Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
140        value in boot_card.c
141
1422006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
143
144        * configure.ac: New BUG-REPORT address.
145
1462006-11-16      Joel Sherrill <joel@OARcorp.com>
147
148        * shared/bspstart.c, shared/start.S: Use common clock driver template
149        and eliminate all fast idle code specific to this BSP. This
150        eliminates a fair amount of code in the BSP clock driver and
151        bsp_startup. The LEON3 has to do a scan of the AMBA bus to find the
152        timer so I added the new hook Clock_driver_support_find_timer to
153        support this. In general, there was some clean up to the file headers
154        of various files.
155
1562006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
157
158        * configure.ac: Require autoconf-2.60. Require automake-1.10.
159
1602006-01-10      Joel Sherrill <joel@OARcorp.com>
161
162        * shared/start.S: Add include of bspopts.h so SIS quirks will trigger.
163
1642006-01-09      Ralf Corsepius <ralf.corsepius@rtems.org>
165
166        * shared/start.S: Backport from rtems-4-6-branch.
167
1682005-10-16      Ralf Corsepius <ralf.corsepius@rtems.org>
169
170        * Makefile.am: Merge-in shared/Makefile.am.
171        * ChangeLog: Merge-in shared/ChangeLog.
172        * configure.ac: Remove shared/Makefile.am.
173
1742005-09-02      Joel Sherrill <joel@OARcorp.com>
175
176        PR 821/bsps
177        * shared/start.S: Workaround -- just avoid copying non-existent
178        initialized data in ROM to RAM.
179
1802004-09-24      Ralf Corsepius <ralf.corsepius@rtems.org>
181
182        * configure.ac: Require automake > 1.9.
183
1842004-04-01      Ralf Corsepius <ralf.corsepius@rtems.org>
185
186        * shared/start.S: Include <rtems/asm.h> instead of <asm.h>.
187
1882004-03-31      Ralf Corsepius <ralf.corsepius@rtems.org>
189
190        * shared/bspstart.c, shared/gnatcommon.c: Convert to using c99 fixed
191        size types.
192
1932004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
194
195        * configure.ac: RTEMS_CHECK_BSPDIR([$RTEMS_BSP_FAMILY]).
196        * acinclude.m4: Regenerate.
197
1982004-01-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
199
200        * Makefile.am: Use @RTEMS_BSP_FAMILY@ instead of
201        $(RTEMS_BSP_FAMILY).
202
2032003-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
204
205        * configure.ac: Require automake >= 1.8, autoconf >= 2.59.
206
2072003-12-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
208
209        * shared/Makefile.am: Cosmetics.
210
2112003-10-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
212
213        * acinclude.m4: Reflect changes to bootstrap.
214        * configure.ac: Remove RTEMS_CHECK_CUSTON_BSP.
215
2162003-09-26      Joel Sherrill <joel@OARcorp.com>
217
218        * shared/bspstart.c: Obsoleting HP PA-RISC port and removing all
219        references.
220
2212003-09-04      Joel Sherrill <joel@OARcorp.com>
222
223        * shared/bspclean.c, shared/bspstart.c: URL for license changed.
224
2252003-08-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
226
227        * Makefile.am: Reflect having moved aclocal/.
228
2292003-08-16      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
230
231        * Makefile.am, shared/Makefile.am: Reflect having moved automake/.
232
2332003-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
234
235        * configure.ac: Use rtems-bugs@rtems.com as bug report email
236        address.
237
2382003-03-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
239
240        * configure.ac: Remove AC_CONFIG_AUX_DIR.
241
2422003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
243
244        * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
245        * configure.ac: AC_PREREQ(2.57).
246
2472002-12-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
248
249        * configure.ac: Remove RTEMS_CHECK_BSP_CACHE.
250
2512002-11-01      Joel Sherrill <joel@OARcorp.com>
252
253        * shared/gnatcommon.c: Removed warnings.
254
2552002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
256
257        * .cvsignore: Reformat. Add autom4te*cache. Remove autom4te.cache.
258
2592002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
260
261        * Makefile.am, shared/Makefile.am: Remove AUTOMAKE_OPTIONS.
262        * configure.ac: AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
263        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
264
2652001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
266
267        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
268        * configure.ac: New file, generated from configure.in by autoupdate.
269        * configure.in: Remove.
270
2712001-10-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
272
273        * acinclude.m4: New file.
274        * configure.in: Use RTEMS_BSP_SUBDIR.
275
2762000-11-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
277
278        * Makefile.am: Cleanup.
279
2802000-11-13      Jiri Gaisler <jgais@ws.estec.esa.nl>
281
282        * shared/ChangeLog, shared/.cvsignore, shared/Makefile.am,
283        shared/bspclean.c, shared/bspstart.c, shared/gnatcommon.c,
284        shared/start.S: New files.  Largely moved from ERC32 BSP to be able
285        to be shared with LEON and other SPARC BSPs.
286        * Makefile.am, configure.in: Added shared directory as part of
287        enhancing ERC32 and adding LEON.
288
2892000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
290
291        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
292
2932000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
294
295        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I
296        $(RTEMS_TOPdir)/aclocal.
297
2982000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
299
300        * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros. Switch to
301        GNU canonicalization.
302
3032000-08-10      Joel Sherrill <joel@OARcorp.com>
304
305        * ChangeLog: New file.
306
3072000-04-23      Jiri Gaisler <jiri@gaisler.com>
308
309        * shared/start.S: Modificatins to preserve the current CWP and
310        adjust the WIM accordingly. This improves compatibility with the
311        remote debugger and the mkprom prom-builder.
312
Note: See TracBrowser for help on using the repository browser.