/** * @file * * @ingroup bsp_bootcard * * @brief Standard system startup. */ /* * This is the C entry point for ALL RTEMS BSPs. It is invoked * from the assembly language initialization file usually called * start.S. It provides the framework for the BSP initialization * sequence. The basic flow of initialization is: * * + start.S: basic CPU setup (stack, zero BSS) * + boot_card * + bspstart.c: bsp_start - more advanced initialization * + obtain information on BSP memory and allocate RTEMS Workspace * + rtems_initialize_data_structures * + allocate memory to C Program Heap * + initialize C Library and C Program Heap * + bsp_pretasking_hook * + if defined( RTEMS_DEBUG ) * - rtems_debug_enable( RTEMS_DEBUG_ALL_MASK ); * + rtems_initialize_before_drivers * + bsp_predriver_hook * + rtems_initialize_device_drivers * - all device drivers * + bsp_postdriver_hook * + rtems_initialize_start_multitasking * - 1st task executes C++ global constructors * .... appplication runs ... * - exit * + back to here eventually * + bspclean.c: bsp_cleanup * * This style of initialization ensures that the C++ global * constructors are executed after RTEMS is initialized. * Thanks to Chris Johns for the idea * to move C++ global constructors into the first task. * * COPYRIGHT (c) 1989-2008. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://www.rtems.com/license/LICENSE. * * $Id$ */ #include #include #include /* * At most a single pointer to the cmdline for those target * short on memory and not supporting a command line. */ const char *bsp_boot_cmdline; /* * Are we using a single heap for the RTEMS Workspace and C Program Heap? */ extern bool rtems_unified_work_area; /* * These are the prototypes and helper routines which are used * when the BSP lets the framework handle RAM allocation between * the RTEMS Workspace and C Program Heap. */ static void bootcard_bsp_libc_helper( void *work_area_start, uintptr_t work_area_size, void *heap_start, uintptr_t heap_size ) { if ( !rtems_unified_work_area && heap_start == BSP_BOOTCARD_HEAP_USES_WORK_AREA) { uintptr_t work_space_size = rtems_configuration_get_work_space_size(); heap_start = (char *) work_area_start + work_space_size; if (heap_size == BSP_BOOTCARD_HEAP_SIZE_DEFAULT) { uintptr_t heap_size_default = work_area_size - work_space_size; heap_size = heap_size_default; } } bsp_libc_init(heap_start, heap_size, 0); } /* * This is the initialization framework routine that weaves together * calls to RTEMS and the BSP in the proper sequence to initialize * the system while maximizing shared code and keeping BSP code in C * as much as possible. */ int boot_card( const char *cmdline ) { rtems_interrupt_level bsp_isr_level; void *work_area_start = NULL; uintptr_t work_area_size = 0; void *heap_start = NULL; uintptr_t heap_size = 0; /* * Special case for PowerPC: The interrupt disable mask is stored in SPRG0. * It must be valid before we can use rtems_interrupt_disable(). */ #ifdef PPC_INTERRUPT_DISABLE_MASK_DEFAULT ppc_interrupt_set_disable_mask( PPC_INTERRUPT_DISABLE_MASK_DEFAULT ); #endif /* PPC_INTERRUPT_DISABLE_MASK_DEFAULT */ /* * Make sure interrupts are disabled. */ rtems_interrupt_disable( bsp_isr_level ); bsp_boot_cmdline = cmdline; /* * Invoke Board Support Package initialization routine written in C. */ bsp_start(); /* * Find out where the block of memory the BSP will use for * the RTEMS Workspace and the C Program Heap is. */ bsp_get_work_area(&work_area_start, &work_area_size, &heap_start, &heap_size); if ( work_area_size <= Configuration.work_space_size ) { printk( "bootcard: work space too big for work area: %p > %p\n", (void *) Configuration.work_space_size, (void *) work_area_size ); bsp_cleanup(); return -1; } if ( rtems_unified_work_area ) { Configuration.work_space_start = work_area_start; Configuration.work_space_size = work_area_size; } else { Configuration.work_space_start = work_area_start; } #if (BSP_DIRTY_MEMORY == 1) memset( work_area_start, 0xCF, work_area_size ); #endif /* * Initialize RTEMS data structures */ rtems_initialize_data_structures(); /* * Initialize the C library for those BSPs using the shared * framework. */ bootcard_bsp_libc_helper( work_area_start, work_area_size, heap_start, heap_size ); /* * All BSP to do any required initialization now that RTEMS * data structures are initialized. In older BSPs or those * which do not use the shared framework, this is the typical * time when the C Library is initialized so malloc() * can be called by device drivers. For BSPs using the shared * framework, this routine can be empty. */ bsp_pretasking_hook(); /* * If debug is enabled, then enable all dynamic RTEMS debug * capabilities. * * NOTE: Most debug features are conditionally compiled in * or enabled via configure time plugins. */ #ifdef RTEMS_DEBUG rtems_debug_enable( RTEMS_DEBUG_ALL_MASK ); #endif /* * Let RTEMS perform initialization it requires before drivers * are allowed to be initialized. */ rtems_initialize_before_drivers(); /* * Execute BSP specific pre-driver hook. Drivers haven't gotten * to initialize yet so this is a good chance to initialize * buses, spurious interrupt handlers, etc.. * * NOTE: Many BSPs do not require this handler and use the * shared stub. */ bsp_predriver_hook(); /* * Initialize all device drivers. */ rtems_initialize_device_drivers(); /* * Invoke the postdriver hook. This normally opens /dev/console * for use as stdin, stdout, and stderr. */ bsp_postdriver_hook(); /* * Complete initialization of RTEMS and switch to the first task. * Global C++ constructors will be executed in the context of that task. */ rtems_initialize_start_multitasking(); /*************************************************************** *************************************************************** * APPLICATION RUNS HERE!!! When it shuts down, we return!!! * *************************************************************** *************************************************************** */ /* * Perform any BSP specific shutdown actions which are written in C. */ bsp_cleanup(); /* * Now return to the start code. */ return 0; }