source: rtems/c/src/lib/libbsp/sh/gensh2/include/Makefile.in @ 4a238002

4.104.114.84.95
Last change on this file since 4a238002 was 4a238002, checked in by Joel Sherrill <joel.sherrill@…>, on Nov 18, 1999 at 9:22:58 PM

Patch from "John M. Mills" <jmills@…> with subsequent cleanup from
Ralf Corsepius <corsepiu@…> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:

Changes:
------

  1. SH-Port:
  • Many files renamed.
  • CONSOLE_DEVNAME and MHZ defines removed from libcpu.
  • console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console applying VPATH.
  • CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
  • MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
  • -DHZ=HZ used in bspstart.c, only
  • Makefile variable HZ used in bsp-dependent directories only.
  1. SH1-Port
  • clock-driver rewritten to provide better resolution for odd CPU frequencies. This driver is only partially tested on hardware, ie. sightly experimental, but I don't expect severe problems with it.
  • Polling SCI-driver added. This driver is experimental and completly untested yet. Therefore it is not yet used for the console (/dev/console is still pointing to /dev/null, cf. gensh1/bsp.h).
  • minor changes to the timer driver
  • SH1 specific delay()/CPU_delay() now is implemented as a function
  1. SH2-Port
  • Merged
  • IMO, the code is still in its infancy. Therefore I have interspersed comments (FIXME) it for items which I think John should look after.
  • sci and console drivers partially rewritten and extended (John, I hope you don't mind).
  • Copyright notices are not yet adapted
  • Property mode set to 100644
File size: 945 bytes
Line 
1##
2## $Id$
3##
4
5@SET_MAKE@
6srcdir = @srcdir@
7top_srcdir = @top_srcdir@
8top_builddir = ../../..
9subdir = sh/gensh2/include
10
11RTEMS_ROOT = @RTEMS_ROOT@
12PROJECT_ROOT = @PROJECT_ROOT@
13
14VPATH = @srcdir@
15
16H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h
17
18#
19#  Equate files are for including from assembly preprocessed by
20#  gm4 or gasp.  No examples are provided except for those for
21#  other CPUs.  The best way to generate them would be to
22#  provide a program which generates the constants used based
23#  on the C equivalents.
24#
25
26EQ_FILES =
27
28SRCS = $(H_FILES) $(EQ_FILES)
29
30include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
31include $(RTEMS_ROOT)/make/leaf.cfg
32
33INSTALL_CHANGE = @INSTALL_CHANGE@
34
35CLEAN_ADDITIONS +=
36CLOBBER_ADDITIONS +=
37
38all: $(SRCS)
39        @INSTALL@ -m 644 $(H_FILES) $(PROJECT_INCLUDE)
40
41Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
42        cd $(top_builddir) \
43         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Note: See TracBrowser for help on using the repository browser.