source: rtems/c/src/lib/libbsp/sh/gensh2/console/Makefile.in @ 4a238002

4.104.114.84.95
Last change on this file since 4a238002 was 4a238002, checked in by Joel Sherrill <joel.sherrill@…>, on Nov 18, 1999 at 9:22:58 PM

Patch from "John M. Mills" <jmills@…> with subsequent cleanup from
Ralf Corsepius <corsepiu@…> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:

Changes:
------

  1. SH-Port:
  • Many files renamed.
  • CONSOLE_DEVNAME and MHZ defines removed from libcpu.
  • console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console applying VPATH.
  • CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
  • MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
  • -DHZ=HZ used in bspstart.c, only
  • Makefile variable HZ used in bsp-dependent directories only.
  1. SH1-Port
  • clock-driver rewritten to provide better resolution for odd CPU frequencies. This driver is only partially tested on hardware, ie. sightly experimental, but I don't expect severe problems with it.
  • Polling SCI-driver added. This driver is experimental and completly untested yet. Therefore it is not yet used for the console (/dev/console is still pointing to /dev/null, cf. gensh1/bsp.h).
  • minor changes to the timer driver
  • SH1 specific delay()/CPU_delay() now is implemented as a function
  1. SH2-Port
  • Merged
  • IMO, the code is still in its infancy. Therefore I have interspersed comments (FIXME) it for items which I think John should look after.
  • sci and console drivers partially rewritten and extended (John, I hope you don't mind).
  • Copyright notices are not yet adapted
  • Property mode set to 100644
File size: 1.4 KB
Line 
1##
2##  $Id$
3##
4
5@SET_MAKE@
6srcdir = @srcdir@
7top_srcdir = @top_srcdir@
8top_builddir = ../../..
9subdir = sh/gensh2/console
10
11RTEMS_ROOT = @RTEMS_ROOT@
12PROJECT_ROOT = @PROJECT_ROOT@
13
14VPATH = @srcdir@:@top_srcdir@/sh/shared
15
16PGM = ${ARCH}/console.rel
17
18# C source names, if any, go here -- minus the .c
19C_PIECES = console
20C_FILES = $(C_PIECES:%=%.c)
21C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
22
23H_FILES =
24
25# Assembly source names, if any, go here -- minus the .S
26S_PIECES =
27S_FILES = $(S_PIECES:%=%.S)
28S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
29
30SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
31OBJS = $(C_O_FILES) $(S_O_FILES)
32
33include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
34include $(RTEMS_ROOT)/make/leaf.cfg
35
36INSTALL_CHANGE = @INSTALL_CHANGE@
37
38#
39# (OPTIONAL) Add local stuff here using +=
40#
41
42DEFINES +=
43CPPFLAGS +=
44CFLAGS +=
45
46LD_PATHS +=
47LD_LIBS +=
48LDFLAGS +=
49
50#
51# Add your list of files to delete here.  The config files
52#  already know how to delete some stuff, so you may want
53#  to just run 'make clean' first to see what gets missed.
54#  'make clobber' already includes 'make clean'
55#
56
57CLEAN_ADDITIONS +=
58CLOBBER_ADDITIONS +=
59
60${PGM}: ${SRCS} ${OBJS}
61        $(make-rel)
62
63all: ${ARCH} $(SRCS) $(PGM)
64
65# the .rel file built here will be put into libbsp.a by
66#       ../wrapup/Makefile
67install: all
68
69Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
70        cd $(top_builddir) \
71         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Note: See TracBrowser for help on using the repository browser.