source: rtems/c/src/lib/libbsp/sh/gensh2/bsp_specs @ 4a238002

4.104.114.84.95
Last change on this file since 4a238002 was 4a238002, checked in by Joel Sherrill <joel.sherrill@…>, on 11/18/99 at 21:22:58

Patch from "John M. Mills" <jmills@…> with subsequent cleanup from
Ralf Corsepius <corsepiu@…> that adds initial Hitachi SH-2
support to RTEMS. Ralf's comments are:

Changes:
------

  1. SH-Port:
  • Many files renamed.
  • CONSOLE_DEVNAME and MHZ defines removed from libcpu.
  • console.c moved to libbsp/sh/shared, build in libbsp/sh/<BSP>/console applying VPATH.
  • CONSOLE_DEVNAME made BSP-specific, replacement is defined in bsp.h
  • MHZ define replaced with HZ (extendent resolution) in custom/*.cfg
  • -DHZ=HZ used in bspstart.c, only
  • Makefile variable HZ used in bsp-dependent directories only.
  1. SH1-Port
  • clock-driver rewritten to provide better resolution for odd CPU frequencies. This driver is only partially tested on hardware, ie. sightly experimental, but I don't expect severe problems with it.
  • Polling SCI-driver added. This driver is experimental and completly untested yet. Therefore it is not yet used for the console (/dev/console is still pointing to /dev/null, cf. gensh1/bsp.h).
  • minor changes to the timer driver
  • SH1 specific delay()/CPU_delay() now is implemented as a function
  1. SH2-Port
  • Merged
  • IMO, the code is still in its infancy. Therefore I have interspersed comments (FIXME) it for items which I think John should look after.
  • sci and console drivers partially rewritten and extended (John, I hope you don't mind).
  • Copyright notices are not yet adapted
  • Property mode set to 100644
File size: 538 bytes
Line 
1%rename cpp old_cpp
2%rename lib old_lib
3%rename endfile old_endfile
4%rename startfile old_startfile
5%rename link old_link
6
7*cpp:
8%(old_cpp) %{qrtems: -D__embedded__} -Asystem(embedded)
9
10*lib:
11%{!qrtems: %(old_lib)} \
12%{qrtems: --start-group %{!qrtems_debug: -lrtemsall } %{qrtems_debug: -lrtemsall_g} \
13 -lc -lgcc --end-group \
14 %{!qnolinkcmds: -T linkcmds%s}}
15
16*startfile:
17%{!qrtems: %(old_startfile)} \
18%{qrtems: %{qrtems_debug: start_g.o%s} %{!qrtems_debug: start.o%s}}
19
20*link:
21%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N -e _start}
22
Note: See TracBrowser for help on using the repository browser.