source: rtems/c/src/lib/libbsp/sh/gensh1/include/bsp.h @ 96b2583

4.104.114.84.95
Last change on this file since 96b2583 was 96b2583, checked in by Joel Sherrill <joel.sherrill@…>, on 01/05/01 at 13:35:32

2001-01-05 Joel Sherrill <joel@…>

  • include/bsp.h: Changed <sh/null.h> to <rtems/devnull.h> to reflect the movement of this component to libmisc.
  • wrapup/Makefile.am: /dev/null driver is no longer in libcpu/sh.
  • Property mode set to 100644
File size: 3.1 KB
Line 
1/*
2 *  This include file contains all board IO definitions.
3 *
4 *  generic sh1
5 *
6 *  Author: Ralf Corsepius (corsepiu@faw.uni-ulm.de)
7 *
8 *  COPYRIGHT (c) 1997-1998, FAW Ulm, Germany
9 *
10 *  This program is distributed in the hope that it will be useful,
11 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
12 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
13 *
14 *
15 *  COPYRIGHT (c) 1998.
16 *  On-Line Applications Research Corporation (OAR).
17 *  Copyright assigned to U.S. Government, 1994.
18 *
19 *  The license and distribution terms for this file may be
20 *  found in the file LICENSE in this distribution or at
21 *  http://www.OARcorp.com/rtems/license.html.
22 *
23 *  $Id$
24 */
25
26#ifndef __gensh1_h
27#define __gensh1_h
28
29#ifdef __cplusplus
30extern "C" {
31#endif
32
33#include <rtems.h>
34#include <clockdrv.h>
35#include <console.h>
36
37/*
38 *  confdefs.h overrides for this BSP:
39 *   - number of termios serial ports (defaults to 1)
40 *   - Interrupt stack space is not minimum if defined.
41 */
42
43/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
44#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
45
46/* EDIT: To activate the sci driver, change the define below */
47#if 1
48#include <rtems/devnull.h>
49#define BSP_CONSOLE_DEVNAME "/dev/null"
50#define BSP_CONSOLE_DRIVER_TABLE_ENTRY DEVNULL_DRIVER_TABLE_ENTRY
51#else
52#include <sh/sci.h>
53#define BSP_CONSOLE_DEVNAME "/dev/sci0"
54#define BSP_CONSOLE_DRIVER_TABLE_ENTRY DEVSCI_DRIVER_TABLE_ENTRY
55#endif
56
57
58/*
59 *  Define the time limits for RTEMS Test Suite test durations.
60 *  Long test and short test duration limits are provided.  These
61 *  values are in seconds and need to be converted to ticks for the
62 *  application.
63 *
64 */
65
66#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
67#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
68
69/*
70 *  Stuff for Time Test 27
71 */
72
73#define MUST_WAIT_FOR_INTERRUPT 0
74
75#define Install_tm27_vector( handler ) \
76{ \
77  rtems_isr_entry ignored ; \
78  rtems_interrupt_catch( (handler), 0, &ignored ) ; \
79}
80
81#define Cause_tm27_intr()
82
83#define Clear_tm27_intr()
84
85#define Lower_tm27_intr()
86
87/* Constants */
88
89/*
90 *  Simple spin delay in microsecond units for device drivers.
91 *  This is very dependent on the clock speed of the target.
92 */
93
94#define delay( microseconds ) CPU_delay(microseconds)
95#define sh_delay( microseconds ) CPU_delay(microseconds)
96
97/*
98 * Defined in the linker script 'linkcmds'
99 */
100
101extern unsigned32       HeapStart ;
102extern unsigned32       HeapEnd ;
103extern unsigned32       WorkSpaceStart ;
104extern unsigned32       WorkSpaceEnd ;
105
106extern void *CPU_Interrupt_stack_low ;
107extern void *CPU_Interrupt_stack_high ;
108
109 
110/* miscellaneous stuff assumed to exist */
111
112extern rtems_configuration_table BSP_Configuration;
113
114extern void bsp_cleanup( void );
115
116/*
117 *  Device Driver Table Entries
118 */
119
120/*
121 * We redefine CONSOLE_DRIVER_TABLE_ENTRY to redirect /dev/console
122 */
123#undef CONSOLE_DRIVER_TABLE_ENTRY
124#define CONSOLE_DRIVER_TABLE_ENTRY \
125  BSP_CONSOLE_DRIVER_TABLE_ENTRY, \
126  { console_initialize, console_open, console_close, \
127      console_read, console_write, console_control }
128 
129/*
130 * NOTE: Use the standard Clock driver entry
131 */
132
133#ifdef __cplusplus
134}
135#endif
136
137#endif
138/* end of include file */
Note: See TracBrowser for help on using the repository browser.