source: rtems/c/src/lib/libbsp/powerpc/virtex/configure.ac @ f4e601b9

4.104.114.84.95
Last change on this file since f4e601b9 was f4e601b9, checked in by Thomas Doerfler <Thomas.Doerfler@…>, on Jul 4, 2007 at 7:02:58 PM

Added missing file

  • Property mode set to 100644
File size: 1.6 KB
Line 
1dnl Process this file with autoconf to produce a configure script.
2dnl
3dnl $Id$
4
5AC_PREREQ(2.59)
6AC_INIT([rtems-c-src-lib-libbsp-powerpc-virtex],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
7AC_CONFIG_SRCDIR([bsp_specs])
8RTEMS_TOP(../../../../../..)
9
10RTEMS_CANONICAL_TARGET_CPU
11AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
12RTEMS_BSP_CONFIGURE
13
14RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
15RTEMS_CANONICALIZE_TOOLS
16RTEMS_PROG_CCAS
17
18RTEMS_CHECK_NETWORKING
19
20AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
21
22RTEMS_BSPOPTS_SET([PPC_USE_SPRG],[*],[1])
23RTEMS_BSPOPTS_HELP([PPC_USE_SPRG],
24[If defined, then the PowerPC specific code in RTEMS will use some
25 of the special purpose registers to slightly optimize interrupt
26 response time.  The use of these registers can conflict with
27 other tools like debuggers.])
28
29RTEMS_BSPOPTS_SET([PPC_VECTOR_FILE_BASE],[*],[0x0100])
30RTEMS_BSPOPTS_HELP([PPC_VECTOR_FILE_BASE],
31[This defines the base address of the exception table.
32 NOTE: Vectors are actually at 0xFFF00000 but file starts at offset.])
33
34RTEMS_BSPOPTS_SET([RTEMS_XPARAMETERS_H],[*],[\<xparameters_dflt.h\>])
35RTEMS_BSPOPTS_HELP([RTEMS_XPARAMETERS_H],
36[This defines the location of the hardware specific "xparameters.h" file.
37 in the file system. Specify an absolute path. Don't forget the double quotes])
38
39#RSG Start - Actually, I think this is wrong
40RTEMS_BSPOPTS_SET([RTEMS_XPPC_BASE],[*],[.])
41RTEMS_BSPOPTS_HELP([RTEMS_XPPC_BASE],[Defines path to Xilinx XPS PPC libraries.])
42#RSG End
43
44# Explicitly list all Makefiles here
45AC_CONFIG_FILES([Makefile])
46
47RTEMS_PPC_EXCEPTIONS
48
49AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.