source: rtems/c/src/lib/libbsp/powerpc/virtex/configure.ac @ bb2b825

4.11
Last change on this file since bb2b825 was bb2b825, checked in by Ralf Corsépius <ralf.corsepius@…>, on Jul 19, 2012 at 1:47:55 PM

Require automake-1.12.2.

  • Property mode set to 100644
File size: 1.6 KB
Line 
1dnl Process this file with autoconf to produce a configure script.
2
3AC_PREREQ([2.69])
4AC_INIT([rtems-c-src-lib-libbsp-powerpc-virtex],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
5AC_CONFIG_SRCDIR([bsp_specs])
6RTEMS_TOP(../../../../../..)
7
8RTEMS_CANONICAL_TARGET_CPU
9AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
10RTEMS_BSP_CONFIGURE
11
12RTEMS_PROG_CC_FOR_TARGET
13RTEMS_CANONICALIZE_TOOLS
14RTEMS_PROG_CCAS
15
16RTEMS_CHECK_NETWORKING
17
18AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
19
20RTEMS_BSPOPTS_SET([PPC_USE_SPRG],[*],[1])
21RTEMS_BSPOPTS_HELP([PPC_USE_SPRG],
22[If defined, then the PowerPC specific code in RTEMS will use some
23 of the special purpose registers to slightly optimize interrupt
24 response time.  The use of these registers can conflict with
25 other tools like debuggers.])
26
27RTEMS_BSPOPTS_SET([PPC_VECTOR_FILE_BASE],[*],[0x0100])
28RTEMS_BSPOPTS_HELP([PPC_VECTOR_FILE_BASE],
29[This defines the base address of the exception table.
30 NOTE: Vectors are actually at 0xFFF00000 but file starts at offset.])
31
32RTEMS_BSPOPTS_SET([RTEMS_XPARAMETERS_H],[*],[\<xparameters_dflt.h\>])
33RTEMS_BSPOPTS_HELP([RTEMS_XPARAMETERS_H],
34[This defines the location of the hardware specific "xparameters.h" file.
35 in the file system. Specify an absolute path. Don't forget the double quotes])
36
37#RSG Start - Actually, I think this is wrong
38RTEMS_BSPOPTS_SET([RTEMS_XPPC_BASE],[*],[.])
39RTEMS_BSPOPTS_HELP([RTEMS_XPPC_BASE],[Defines path to Xilinx XPS PPC libraries.])
40#RSG End
41
42RTEMS_BSP_CLEANUP_OPTIONS(0, 1)
43
44# Explicitly list all Makefiles here
45AC_CONFIG_FILES([Makefile])
46
47RTEMS_PPC_EXCEPTIONS
48
49AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.