source: rtems/c/src/lib/libbsp/powerpc/ss555/configure.ac @ c20001c4

5
Last change on this file since c20001c4 was c20001c4, checked in by Joel Sherrill <joel@…>, on 05/16/18 at 14:57:37

ss555: Move -Dxxx to configure.ac

Updates #3425.

  • Property mode set to 100644
File size: 1.6 KB
Line 
1## Process this file with autoconf to produce a configure script.
2
3AC_PREREQ([2.69])
4AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
5RTEMS_TOP(../../../../../..)
6RTEMS_SOURCE_TOP
7RTEMS_BUILD_TOP
8RTEMS_BSP_LINKCMDS
9
10RTEMS_CANONICAL_TARGET_CPU
11AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
12RTEMS_BSP_CONFIGURE
13
14
15
16RTEMS_BSPOPTS_SET([WATCHDOG_TIMEOUT],[*],[0xFFFF])
17RTEMS_BSPOPTS_HELP([WATCHDOG_TIMEOUT],
18[Define to the desired timeout (in steps of 1/20 msec) to enable the
19 watchdog.  Default is to disable the watchdog entirely.])
20
21RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
22RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
23[Define to 1 if you want termios support for every port.
24 Termios support is independent of the choice of UART I/O mode.])
25
26RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCI2_MINOR])
27RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
28[Must be defined to be one of SCI1_MINOR or SCI2_MINOR.  Determines which
29 device will be registered as /dev/console.])
30
31RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
32RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
33[Define to 1 if you want interrupt-driven I/O for the SCI ports.])
34
35RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SCI2_MINOR])
36RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
37[Must be defined to be one of SCI1_MINOR or SCI2_MINOR.  Determines which
38 device is used for output by printk().  The printk port always uses polled
39 I/O.  Don't open the printk port from RTEMS unless also using polled I/O
40 for the SCI ports.])
41
42AC_DEFINE(mpc555, 1, [PowerPC model option])
43
44RTEMS_BSP_CLEANUP_OPTIONS
45
46# Explicitly list a Makefile here
47AC_CONFIG_FILES([Makefile])
48
49RTEMS_PPC_EXCEPTIONS
50
51AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.