1 | ## Process this file with autoconf to produce a configure script. |
---|
2 | ## |
---|
3 | ## $Id$ |
---|
4 | |
---|
5 | AC_PREREQ(2.60) |
---|
6 | AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla]) |
---|
7 | AC_CONFIG_SRCDIR([bsp_specs]) |
---|
8 | RTEMS_TOP(../../../../../..) |
---|
9 | |
---|
10 | RTEMS_CANONICAL_TARGET_CPU |
---|
11 | AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10]) |
---|
12 | RTEMS_BSP_CONFIGURE |
---|
13 | |
---|
14 | RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]) |
---|
15 | RTEMS_CANONICALIZE_TOOLS |
---|
16 | RTEMS_PROG_CCAS |
---|
17 | |
---|
18 | RTEMS_CHECK_NETWORKING |
---|
19 | AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") |
---|
20 | |
---|
21 | RTEMS_BSPOPTS_SET([WATCHDOG_TIMEOUT],[*],[0xFFFF]) |
---|
22 | RTEMS_BSPOPTS_HELP([WATCHDOG_TIMEOUT], |
---|
23 | [Define to the desired timeout (in steps of 1/20 msec) to enable the |
---|
24 | watchdog. Default is to disable the watchdog entirely.]) |
---|
25 | |
---|
26 | RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0]) |
---|
27 | RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS], |
---|
28 | [Define to 1 if you want termios support for every port. |
---|
29 | Termios support is independent of the choice of UART I/O mode.]) |
---|
30 | |
---|
31 | RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCI2_MINOR]) |
---|
32 | RTEMS_BSPOPTS_HELP([CONSOLE_MINOR], |
---|
33 | [Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which |
---|
34 | device will be registered as /dev/console.]) |
---|
35 | |
---|
36 | RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0]) |
---|
37 | RTEMS_BSPOPTS_HELP([UARTS_IO_MODE], |
---|
38 | [Define to 1 if you want interrupt-driven I/O for the SCI ports.]) |
---|
39 | |
---|
40 | RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SCI2_MINOR]) |
---|
41 | RTEMS_BSPOPTS_HELP([PRINTK_MINOR], |
---|
42 | [Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which |
---|
43 | device is used for output by printk(). The printk port always uses polled |
---|
44 | I/O. Don't open the printk port from RTEMS unless also using polled I/O |
---|
45 | for the SCI ports.]) |
---|
46 | |
---|
47 | RTEMS_BSP_CLEANUP_OPTIONS(0, 0) |
---|
48 | |
---|
49 | # Explicitly list a Makefile here |
---|
50 | AC_CONFIG_FILES([Makefile]) |
---|
51 | |
---|
52 | RTEMS_PPC_EXCEPTIONS |
---|
53 | |
---|
54 | AC_OUTPUT |
---|