[a800d09c] | 1 | ## Process this file with autoconf to produce a configure script. |
---|
| 2 | |
---|
[0f77281] | 3 | AC_PREREQ([2.69]) |
---|
[12072880] | 4 | AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) |
---|
[a0663b2] | 5 | AC_CONFIG_SRCDIR([make/custom/ss555.cfg]) |
---|
[a800d09c] | 6 | RTEMS_TOP(../../../../../..) |
---|
[2afb22b] | 7 | RTEMS_SOURCE_TOP |
---|
| 8 | RTEMS_BUILD_TOP |
---|
| 9 | RTEMS_BSP_LINKCMDS |
---|
[a800d09c] | 10 | |
---|
| 11 | RTEMS_CANONICAL_TARGET_CPU |
---|
[4ff09d5b] | 12 | AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) |
---|
[a800d09c] | 13 | RTEMS_BSP_CONFIGURE |
---|
| 14 | |
---|
| 15 | |
---|
| 16 | |
---|
| 17 | RTEMS_BSPOPTS_SET([WATCHDOG_TIMEOUT],[*],[0xFFFF]) |
---|
[309dbd0] | 18 | RTEMS_BSPOPTS_HELP([WATCHDOG_TIMEOUT], |
---|
[a800d09c] | 19 | [Define to the desired timeout (in steps of 1/20 msec) to enable the |
---|
| 20 | watchdog. Default is to disable the watchdog entirely.]) |
---|
| 21 | |
---|
| 22 | RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0]) |
---|
| 23 | RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS], |
---|
| 24 | [Define to 1 if you want termios support for every port. |
---|
| 25 | Termios support is independent of the choice of UART I/O mode.]) |
---|
| 26 | |
---|
| 27 | RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCI2_MINOR]) |
---|
| 28 | RTEMS_BSPOPTS_HELP([CONSOLE_MINOR], |
---|
| 29 | [Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which |
---|
| 30 | device will be registered as /dev/console.]) |
---|
| 31 | |
---|
| 32 | RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0]) |
---|
| 33 | RTEMS_BSPOPTS_HELP([UARTS_IO_MODE], |
---|
| 34 | [Define to 1 if you want interrupt-driven I/O for the SCI ports.]) |
---|
| 35 | |
---|
| 36 | RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SCI2_MINOR]) |
---|
| 37 | RTEMS_BSPOPTS_HELP([PRINTK_MINOR], |
---|
| 38 | [Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which |
---|
| 39 | device is used for output by printk(). The printk port always uses polled |
---|
| 40 | I/O. Don't open the printk port from RTEMS unless also using polled I/O |
---|
| 41 | for the SCI ports.]) |
---|
| 42 | |
---|
[3dd381f] | 43 | RTEMS_BSP_CLEANUP_OPTIONS |
---|
[0f707111] | 44 | |
---|
[309dbd0] | 45 | # Explicitly list a Makefile here |
---|
[5133bd6] | 46 | AC_CONFIG_FILES([Makefile]) |
---|
[a800d09c] | 47 | |
---|
[756f4a4] | 48 | RTEMS_PPC_EXCEPTIONS |
---|
[a800d09c] | 49 | |
---|
| 50 | AC_OUTPUT |
---|