source: rtems/c/src/lib/libbsp/powerpc/qoriq/configure.ac @ dd863f8

5
Last change on this file since dd863f8 was e29f1f5, checked in by Sebastian Huber <sebastian.huber@…>, on 10/19/15 at 06:44:33

bsp/qoriq: Use U-Boot provided FDT
  • Property mode set to 100644
File size: 9.2 KB
Line 
1AC_PREREQ([2.69])
2AC_INIT([rtems-c-src-lib-libbsp-powerpc-qoriq],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
3AC_CONFIG_SRCDIR([bsp_specs])
4RTEMS_TOP(../../../../../..)
5
6RTEMS_CANONICAL_TARGET_CPU
7AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
8RTEMS_BSP_CONFIGURE
9
10RTEMS_PROG_CC_FOR_TARGET
11RTEMS_CANONICALIZE_TOOLS
12RTEMS_PROG_CCAS
13
14RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1])
15RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED
16
17RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1])
18RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED
19
20RTEMS_BSPOPTS_SET([BSP_USE_DATA_CACHE_BLOCK_TOUCH],[*],[1])
21RTEMS_BSPOPTS_HELP([BSP_USE_DATA_CACHE_BLOCK_TOUCH],[if defined use dcbt instruction])
22
23RTEMS_BSPOPTS_SET([PPC_EXC_CONFIG_USE_FIXED_HANDLER],[*],[1])
24RTEMS_BSPOPTS_HELP([PPC_EXC_CONFIG_USE_FIXED_HANDLER],
25[use fixed high-level exception handler])
26
27RTEMS_BSPOPTS_SET([PPC_EXC_CONFIG_BOOKE_ONLY],[*],[1])
28RTEMS_BSPOPTS_HELP([PPC_EXC_CONFIG_BOOKE_ONLY],
29[only support Book E exception types])
30
31RTEMS_BSPOPTS_SET([PPC_CACHE_ALIGNMENT],[qoriq_t*],[64])
32RTEMS_BSPOPTS_SET([PPC_CACHE_ALIGNMENT],[*],[])
33RTEMS_BSPOPTS_HELP([PPC_CACHE_ALIGNMENT],[the cache alignment])
34
35RTEMS_BSPOPTS_SET([PPC_CACHE_DATA_L1_SIZE],[*],[(32 * 1024)])
36RTEMS_BSPOPTS_HELP([PPC_CACHE_DATA_L1_SIZE],[the L1 data cache size])
37
38RTEMS_BSPOPTS_SET([PPC_CACHE_DATA_L2_SIZE],[qoriq_t*],[(2048 * 1024)])
39RTEMS_BSPOPTS_SET([PPC_CACHE_DATA_L2_SIZE],[*],[(256 * 1024)])
40RTEMS_BSPOPTS_HELP([PPC_CACHE_DATA_L2_SIZE],[the L2 data cache size])
41
42RTEMS_BSPOPTS_SET([PPC_CACHE_INSTRUCTION_L1_SIZE],[*],[(32 * 1024)])
43RTEMS_BSPOPTS_HELP([PPC_CACHE_INSTRUCTION_L1_SIZE],[the L1 instruction cache size])
44
45RTEMS_BSPOPTS_SET([PPC_CACHE_INSTRUCTION_L2_SIZE],[qoriq_t*],[(2048 * 1024)])
46RTEMS_BSPOPTS_SET([PPC_CACHE_INSTRUCTION_L2_SIZE],[*],[(256 * 1024)])
47RTEMS_BSPOPTS_HELP([PPC_CACHE_INSTRUCTION_L2_SIZE],[the L2 instruction cache size])
48
49RTEMS_BSPOPTS_SET([BSP_CONSOLE_BAUD],[*],[115200])
50RTEMS_BSPOPTS_HELP([BSP_CONSOLE_BAUD],[default baud for console and other serial devices])
51
52RTEMS_BSPOPTS_SET([BSP_USE_UART_INTERRUPTS],[*],[1])
53RTEMS_BSPOPTS_HELP([BSP_USE_UART_INTERRUPTS],[enable usage of interrupts for the UART modules])
54
55RTEMS_BSPOPTS_SET([U_BOOT_USE_FDT],[qoriq_t*],[1])
56RTEMS_BSPOPTS_SET([U_BOOT_USE_FDT],[*],[])
57RTEMS_BSPOPTS_HELP([U_BOOT_USE_FDT],[enables U-Boot support using FDT])
58
59RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[qoriq_t*],[131072])
60RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_SIZE_MAX],[*],[])
61RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_SIZE_MAX],[maximum size of the FDT blob in bytes])
62
63RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[qoriq_t*],[1])
64RTEMS_BSPOPTS_SET([BSP_FDT_BLOB_READ_ONLY],[*],[])
65RTEMS_BSPOPTS_HELP([BSP_FDT_BLOB_READ_ONLY],[place the FDT blob into the read-only data area])
66
67RTEMS_BSPOPTS_SET([HAS_UBOOT],[qoriq_t*],[])
68RTEMS_BSPOPTS_SET([HAS_UBOOT],[*],[1])
69RTEMS_BSPOPTS_HELP([HAS_UBOOT],[enables legacy U-Boot support without FDT])
70
71RTEMS_BSPOPTS_SET([U_BOOT_64_BIT_PHYS_SIZE],[qoriq_t*],[1])
72RTEMS_BSPOPTS_SET([U_BOOT_64_BIT_PHYS_SIZE],[*],[])
73RTEMS_BSPOPTS_HELP([U_BOOT_64_BIT_PHYS_SIZE],[if defined, then use uint64_t for phys_size_t (only used by legacy U-Boot support)])
74
75RTEMS_BSPOPTS_SET([U_BOOT_GENERIC_BOARD_INFO],[qoriq_t*],[1])
76RTEMS_BSPOPTS_SET([U_BOOT_GENERIC_BOARD_INFO],[*],[])
77RTEMS_BSPOPTS_HELP([U_BOOT_GENERIC_BOARD_INFO],[if defined, then use the generic bd_t structure (only used by legacy U-Boot support)])
78
79RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_BEGIN],[qoriq_p2020*],[0x3fff0000])
80RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_BEGIN],[qoriq_t*],[])
81RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_BEGIN],[*],[0x1fff0000])
82RTEMS_BSPOPTS_HELP([U_BOOT_BOOT_PAGE_BEGIN],[the begin address of the boot page set up by U-Boot (only used by legacy U-Boot support)])
83
84RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_LAST],[qoriq_p2020*],[0x3fffffff])
85RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_LAST],[qoriq_t*],[])
86RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_LAST],[*],[0x1fffffff])
87RTEMS_BSPOPTS_HELP([U_BOOT_BOOT_PAGE_LAST],[the last address of the boot page set up by U-Boot (only used by legacy U-Boot support)])
88
89RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[qoriq_p2020*],[0xf240])
90RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[qoriq_t*],[])
91RTEMS_BSPOPTS_SET([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[*],[0xf2a0])
92RTEMS_BSPOPTS_HELP([U_BOOT_BOOT_PAGE_SPIN_OFFSET],[the offset to the spin table in the boot page set up by U-Boot (only used by legacy U-Boot support)])
93
94RTEMS_BSPOPTS_SET([QORIQ_CPU_COUNT],[qoriq_t*],[24])
95RTEMS_BSPOPTS_SET([QORIQ_CPU_COUNT],[*],[2])
96RTEMS_BSPOPTS_HELP([QORIQ_CPU_COUNT],[maximum virtual processor count])
97
98RTEMS_BSPOPTS_SET([QORIQ_THREAD_COUNT],[qoriq_t*],[2])
99RTEMS_BSPOPTS_SET([QORIQ_THREAD_COUNT],[*],[1])
100RTEMS_BSPOPTS_HELP([QORIQ_THREAD_COUNT],[the number of threads per processor])
101
102RTEMS_BSPOPTS_SET([QORIQ_ETSEC_1_PHY_ADDR],[*],[-1])
103RTEMS_BSPOPTS_HELP([QORIQ_ETSEC_1_PHY_ADDR],[PHY address for eTSEC interface 1])
104
105RTEMS_BSPOPTS_SET([QORIQ_ETSEC_2_PHY_ADDR],[*],[0])
106RTEMS_BSPOPTS_HELP([QORIQ_ETSEC_2_PHY_ADDR],[PHY address for eTSEC interface 2])
107
108RTEMS_BSPOPTS_SET([QORIQ_ETSEC_3_PHY_ADDR],[*],[1])
109RTEMS_BSPOPTS_HELP([QORIQ_ETSEC_3_PHY_ADDR],[PHY address for eTSEC interface 3])
110
111RTEMS_BSPOPTS_SET([QORIQ_UART_0_ENABLE],[qoriq_core_1],[0])
112RTEMS_BSPOPTS_SET([QORIQ_UART_0_ENABLE],[*],[1])
113RTEMS_BSPOPTS_HELP([QORIQ_UART_0_ENABLE],[use 1 to enable UART 0, otherwise use 0])
114
115RTEMS_BSPOPTS_SET([QORIQ_UART_1_ENABLE],[qoriq_core_1],[0])
116RTEMS_BSPOPTS_SET([QORIQ_UART_1_ENABLE],[*],[1])
117RTEMS_BSPOPTS_HELP([QORIQ_UART_1_ENABLE],[use 1 to enable UART 1, otherwise use 0])
118
119RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_MASTER_CORE],[*],[0])
120RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_MASTER_CORE],[UART to Intercom bridge master core index])
121
122RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_SLAVE_CORE],[*],[1])
123RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_SLAVE_CORE],[UART to Intercom bridge slave core index])
124
125RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_TASK_PRIORITY],[*],[250])
126RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_TASK_PRIORITY],[UART to Intercom bridge task priority])
127
128RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_0_ENABLE],[*],[0])
129RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_0_ENABLE],[use 1 to enable UART 0 to Intercom bridge, otherwise use 0])
130
131RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[qoriq_core_0],[1])
132RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[qoriq_core_1],[1])
133RTEMS_BSPOPTS_SET([QORIQ_UART_BRIDGE_1_ENABLE],[*],[0])
134RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_1_ENABLE],[use 1 to enable UART 1 to Intercom bridge, otherwise use 0])
135
136RTEMS_BSPOPTS_SET([BSP_DISABLE_UBOOT_WORK_AREA_CONFIG],[*],[1])
137RTEMS_BSPOPTS_HELP([BSP_DISABLE_UBOOT_WORK_AREA_CONFIG],[disable U-Boot work area configuration])
138
139RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1])
140RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin])
141
142RTEMS_BSPOPTS_SET([QORIQ_INTERCOM_AREA_BEGIN],[*],[0x3000000])
143RTEMS_BSPOPTS_HELP([QORIQ_INTERCOM_AREA_BEGIN],[inter-processor communication area begin])
144RTEMS_BSPOPTS_SET([QORIQ_INTERCOM_AREA_SIZE],[*],[0x1000000])
145RTEMS_BSPOPTS_HELP([QORIQ_INTERCOM_AREA_SIZE],[inter-processor communication area size])
146
147RTEMS_BSPOPTS_SET([QORIQ_TLB1_ENTRY_COUNT],[qoriq_t*],[64])
148RTEMS_BSPOPTS_SET([QORIQ_TLB1_ENTRY_COUNT],[*],[16])
149RTEMS_BSPOPTS_HELP([QORIQ_TLB1_ENTRY_COUNT],[TLB1 entry count])
150
151RTEMS_BSPOPTS_SET([QORIQ_INITIAL_MSR],[qoriq_t*],[0x02002200])
152RTEMS_BSPOPTS_SET([QORIQ_INITIAL_MSR],[*],[0x02000200])
153RTEMS_BSPOPTS_HELP([QORIQ_INITIAL_MSR],[initial MSR value])
154
155RTEMS_BSPOPTS_SET([QORIQ_INITIAL_SPEFSCR],[qoriq_t*],[])
156RTEMS_BSPOPTS_SET([QORIQ_INITIAL_SPEFSCR],[*],[0x00000000])
157RTEMS_BSPOPTS_HELP([QORIQ_INITIAL_SPEFSCR],[initial SPEFSCR value])
158
159RTEMS_BSPOPTS_SET([QORIQ_INITIAL_BUCSR],[qoriq_t*],[0x01400201])
160RTEMS_BSPOPTS_SET([QORIQ_INITIAL_BUCSR],[*],[])
161RTEMS_BSPOPTS_HELP([QORIQ_INITIAL_BUCSR],[initial BUCSR value])
162
163RTEMS_BSPOPTS_SET([QORIQ_MMU_DEVICE_MAS7],[qoriq_t*],[0xf])
164RTEMS_BSPOPTS_SET([QORIQ_MMU_DEVICE_MAS7],[*],[0x0])
165RTEMS_BSPOPTS_HELP([QORIQ_MMU_DEVICE_MAS7],[MAS7 value for device TLB1 entries])
166
167RTEMS_BSPOPTS_SET([QORIQ_CLOCK_TIMER],[qoriq_core_1],[4])
168RTEMS_BSPOPTS_SET([QORIQ_CLOCK_TIMER],[*],[0])
169RTEMS_BSPOPTS_HELP([QORIQ_CLOCK_TIMER],[global timer used for system clock, 0..3 maps to A0..A3, and 4..7 maps to B0..B3])
170
171RTEMS_BSPOPTS_SET([QORIQ_CLOCK_TIMECOUNTER],[qoriq_core_1],[5])
172RTEMS_BSPOPTS_SET([QORIQ_CLOCK_TIMECOUNTER],[*],[1])
173RTEMS_BSPOPTS_HELP([QORIQ_CLOCK_TIMECOUNTER],[global timer used for the timecounter, 0..3 maps to A0..A3, and 4..7 maps to B0..B3])
174
175RTEMS_BSPOPTS_SET([QORIQ_CHIP_VARIANT],[qoriq_t2080*],[QORIQ_CHIP_T2080])
176RTEMS_BSPOPTS_SET([QORIQ_CHIP_VARIANT],[qoriq_t4240*],[QORIQ_CHIP_T4240])
177RTEMS_BSPOPTS_SET([QORIQ_CHIP_VARIANT],[*],[QORIQ_CHIP_P1020])
178RTEMS_BSPOPTS_HELP([QORIQ_CHIP_VARIANT],[chip variant, use one of the defines QORIQ_CHIP_P1020, QORIQ_CHIP_T2080 or QORIQ_CHIP_T4240])
179
180RTEMS_BSPOPTS_SET([QORIQ_BUS_CLOCK_DIVIDER],[qoriq_t*],[2])
181RTEMS_BSPOPTS_SET([QORIQ_BUS_CLOCK_DIVIDER],[*],[1])
182RTEMS_BSPOPTS_HELP([QORIQ_BUS_CLOCK_DIVIDER],[divider of the platform clock to get the clock most on-chip peripherals])
183
184RTEMS_CHECK_NETWORKING
185AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
186
187RTEMS_CHECK_SMP
188AM_CONDITIONAL(HAS_SMP,[test "$rtems_cv_HAS_SMP" = "yes"])
189
190RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
191RTEMS_PPC_EXCEPTIONS
192RTEMS_BSP_LINKCMDS
193
194AC_CONFIG_FILES([Makefile])
195AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.