/*
 *  This set of routines starts the application.  It includes application,
 *  board, and monitor specific initialization and configuration.
 *  The generic CPU dependent initialization has been performed
 *  before any of these are invoked.
 *
 *  COPYRIGHT (c) 1989-2008.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.rtems.com/license/LICENSE.
 */

#include <string.h>
#include <fcntl.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <psim.h>
#include <bsp/bootcard.h>
#include <rtems/bspIo.h>
#include <rtems/powerpc/powerpc.h>

#include <libcpu/cpuIdent.h>
#include <libcpu/bat.h>
#include <libcpu/spr.h>

SPR_RW(SPRG1)

/*  On psim, each click of the decrementer register corresponds
 *  to 1 instruction.  By setting this to 100, we are indicating
 *  that we are assuming it can execute 100 instructions per
 *  microsecond.  This corresponds to sustaining 1 instruction
 *  per cycle at 100 Mhz.  Whether this is a good guess or not
 *  is anyone's guess.
 */
extern int PSIM_INSTRUCTIONS_PER_MICROSECOND;

/*
 * PCI Bus Frequency
 */
unsigned int BSP_bus_frequency;

/*
 *  Driver configuration parameters
 */
uint32_t   bsp_clicks_per_usec;

/*
 * Memory on this board.
 */
uint32_t BSP_mem_size = (uint32_t)RamSize;

/*
 * Time base divisior (how many tick for 1 second).
 */
unsigned int BSP_time_base_divisor;

extern unsigned long __rtems_end[];

void BSP_panic(char *s)
{
  printk("%s PANIC %s\n",_RTEMS_version, s);
  __asm__ __volatile ("sc");
}

void _BSP_Fatal_error(unsigned int v)
{
  printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
  __asm__ __volatile ("sc");
}

/*
 *  bsp_start
 *
 *  This routine does the bulk of the system initialization.
 */
void bsp_start( void )
{
  uintptr_t intrStackStart;
  uintptr_t intrStackSize;

  /*
   * Note we can not get CPU identification dynamically.
   * PVR has to be set to PPC_PSIM (0xfffe) from the device
   * file.
   */

  get_ppc_cpu_type();

  /*
   *  initialize the device driver parameters
   */
  BSP_bus_frequency        = (unsigned int)&PSIM_INSTRUCTIONS_PER_MICROSECOND;
  bsp_clicks_per_usec      = BSP_bus_frequency;
  BSP_time_base_divisor    = 1;

  /*
   *  The simulator likes the exception table to be at 0xfff00000.
   */
  bsp_exceptions_in_RAM = FALSE;

  /*
   * Initialize the interrupt related settings.
   */
  intrStackStart = (uintptr_t) __rtems_end;
  intrStackSize = rtems_configuration_get_interrupt_stack_size();

  /*
   * Initialize default raw exception handlers.
   */
  ppc_exc_initialize(
    PPC_INTERRUPT_DISABLE_MASK_DEFAULT,
    intrStackStart,
    intrStackSize
  );

  /*
   * Initalize RTEMS IRQ system
   */
  BSP_rtems_irq_mng_init(0);

  /*
   * Setup BATs and enable MMU
   */
  /* Memory */
  setdbat(0, 0x0<<24, 0x0<<24, 2<<24, _PAGE_RW);
  setibat(0, 0x0<<24, 0x0<<24, 2<<24,        0);
  /* PCI    */
  setdbat(1, 0x8<<24, 0x8<<24, 1<<24,  IO_PAGE);
  setdbat(2, 0xc<<24, 0xc<<24, 1<<24,  IO_PAGE);

  _write_MSR(_read_MSR() | MSR_DR | MSR_IR);
  __asm__ volatile("sync; isync");

}