source: rtems/c/src/lib/libbsp/powerpc/ppcn_60x/configure.ac @ 6128a4a

## Process this file with autoconf to produce a configure script.
## 
## $Id$

AC_PREREQ(2.59)
AC_INIT([rtems-c-src-lib-libbsp-powerpc-ppcn_60x],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)

RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.8])
RTEMS_BSP_CONFIGURE

RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
RTEMS_CANONICALIZE_TOOLS
RTEMS_PROG_CCAS

RTEMS_CHECK_NETWORKING

# Don't build the network directory
# The problem is that the code there has not yet been converted to
# bsd networking
AM_CONDITIONAL(HAS_NETWORKING,false)
# AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")

RTEMS_BSPOPTS_SET([PPC_USE_SPRG],[*],[0])
RTEMS_BSPOPTS_HELP([PPC_USE_SPRG],
[If defined, then the PowerPC specific code in RTEMS will use some
of the special purpose registers to slightly optimize interrupt
response time.  The use of these registers can conflict with
other tools like debuggers.])

RTEMS_BSPOPTS_SET([PPC_USE_DATA_CACHE],[*],[1])
RTEMS_BSPOPTS_HELP([PPC_USE_DATA_CACHE],
[If defined, then the PowerPC specific code in RTEMS will use
 data cache instructions to optimize the context switch code.
 This code can conflict with debuggers or emulators.  It is known
 to break the Corelis PowerPC emulator with at least some combinations
 of PowerPC 603e revisions and emulator versions.
 The BSP actually contains the call that enables this.])

# FIXME: This should be a 1 out of 2 (3??) selection.
RTEMS_BSPOPTS_SET([PPCN_60X_USE_DINK],[*],[1])
RTEMS_BSPOPTS_HELP([PPCN_60X_USE_DINK],
[The Score603e board can be configured with 3 ROM monitors.  Only two
 are appropriate for use with RTEMS.  Set exactly one of these to "1"
 to indicate which ROM monitor is on the board you are using. Corresponds to
PPCN_60X_USE_NONE])

RTEMS_BSPOPTS_SET([PPCN_60X_USE_NONE],[*],[0])
RTEMS_BSPOPTS_HELP([PPCN_60X_USE_NONE],
[The Score603e board can be configured with 3 ROM monitors.  Only two
 are appropriate for use with RTEMS.  Set exactly one of these to "1"
 to indicate which ROM monitor is on the board you are using. Corresponds to
PPCN_60X_USE_DINK])

RTEMS_BSPOPTS_SET([PPC_VECTOR_FILE_BASE],[*],[0x0100])
RTEMS_BSPOPTS_HELP([PPC_VECTOR_FILE_BASE],
[This defines the base address of the exception table.
 NOTE: Vectors are actually at 0xFFF00000 but file starts at offset.])


# Explicitly list all Makefiles here
AC_CONFIG_FILES([Makefile
wrapup/Makefile])

RTEMS_PPC_EXCEPTIONS([old])

AC_OUTPUT