source: rtems/c/src/lib/libbsp/powerpc/ppcn_60x/configure.ac @ 162cc99

4.104.114.84.95
Last change on this file since 162cc99 was 7273b6e, checked in by Joel Sherrill <joel.sherrill@…>, on 03/28/02 at 00:54:58

2002-03-27 Ralf Corsepius <corsepiu@…>

  • configure.ac: AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS). AM_INIT_AUTOMAKE([no-define foreign 1.6]).
  • Makefile.am: Remove AUTOMAKE_OPTIONS.
  • Property mode set to 100644
File size: 2.6 KB
Line 
1## Process this file with autoconf to produce a configure script.
2##
3## $Id$
4
5AC_PREREQ(2.52)
6AC_INIT([rtems-c-src-lib-libbsp-powerpc-ppcn_60x],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
7AC_CONFIG_SRCDIR([bsp_specs])
8RTEMS_TOP(../../../../../..)
9AC_CONFIG_AUX_DIR(../../../../../..)
10
11RTEMS_CANONICAL_TARGET_CPU
12AM_INIT_AUTOMAKE([no-define foreign 1.6])
13RTEMS_BSP_CONFIGURE
14
15RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
16RTEMS_CANONICALIZE_TOOLS
17
18RTEMS_CHECK_NETWORKING
19
20# Don't build the network directory
21# The problem is that the code there has not yet been converted to
22# bsd networking
23AM_CONDITIONAL(HAS_NETWORKING,false)
24# AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
25
26RTEMS_BSPOPTS_SET([PPC_USE_SPRG],[*],[0])
27RTEMS_BSPOPTS_HELP([PPC_USE_SPRG],
28[If defined, then the PowerPC specific code in RTEMS will use some
29of the special purpose registers to slightly optimize interrupt
30response time.  The use of these registers can conflict with
31other tools like debuggers.])
32
33RTEMS_BSPOPTS_SET([PPC_USE_DATA_CACHE],[*],[1])
34RTEMS_BSPOPTS_HELP([PPC_USE_DATA_CACHE],
35[If defined, then the PowerPC specific code in RTEMS will use
36 data cache instructions to optimize the context switch code.
37 This code can conflict with debuggers or emulators.  It is known
38 to break the Corelis PowerPC emulator with at least some combinations
39 of PowerPC 603e revisions and emulator versions.
40 The BSP actually contains the call that enables this.])
41
42# FIXME: This should be a 1 out of 2 (3??) selection.
43RTEMS_BSPOPTS_SET([PPCN_60X_USE_DINK],[*],[1])
44RTEMS_BSPOPTS_HELP([PPCN_60X_USE_DINK],
45[The Score603e board can be configured with 3 ROM monitors.  Only two
46 are appropriate for use with RTEMS.  Set exactly one of these to "1"
47 to indicate which ROM monitor is on the board you are using. Corresponds to
48PPCN_60X_USE_NONE])
49
50RTEMS_BSPOPTS_SET([PPCN_60X_USE_NONE],[*],[0])
51RTEMS_BSPOPTS_HELP([PPCN_60X_USE_NONE],
52[The Score603e board can be configured with 3 ROM monitors.  Only two
53 are appropriate for use with RTEMS.  Set exactly one of these to "1"
54 to indicate which ROM monitor is on the board you are using. Corresponds to
55PPCN_60X_USE_DINK])
56
57RTEMS_BSPOPTS_SET([PPC_VECTOR_FILE_BASE],[*],[0x0100])
58RTEMS_BSPOPTS_HELP([PPC_VECTOR_FILE_BASE],
59[This defines the base address of the exception table.
60 NOTE: Vectors are actually at 0xFFF00000 but file starts at offset.])
61
62
63# Explicitly list all Makefiles here
64AC_CONFIG_FILES([Makefile
65clock/Makefile
66console/Makefile
67include/Makefile
68network/Makefile
69nvram/Makefile
70pci/Makefile
71start/Makefile
72startup/Makefile
73timer/Makefile
74tod/Makefile
75universe/Makefile
76vectors/Makefile
77wrapup/Makefile])
78
79RTEMS_PPC_EXCEPTIONS([old])
80
81AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.