source: rtems/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h @ 4909a30

4.104.11
Last change on this file since 4909a30 was 4909a30, checked in by Joel Sherrill <joel.sherrill@…>, on Sep 10, 2008 at 9:35:37 PM

2008-09-10 Joel Sherrill <joel.sherrill@…>

  • include/bsp.h: Review of all bsp_cleanup() implementations. In this phase, all prototypes were removed from bsp.h and empty implementations were removed and made to use the shared stub.
  • Property mode set to 100644
File size: 2.4 KB
Line 
1/*  bsp.h
2 *
3 *  This include file contains all board IO definitions.
4 *
5 *  XXX : put yours in here
6 *
7 *  COPYRIGHT (c) 1989-1999.
8 *  On-Line Applications Research Corporation (OAR).
9 *
10 *  The license and distribution terms for this file may be
11 *  found in the file LICENSE in this distribution or at
12 *  http://www.rtems.com/license/LICENSE.
13 *
14 *  $Id$
15 */
16
17#ifndef _BSP_H
18#define _BSP_H
19
20#ifdef __cplusplus
21extern "C" {
22#endif
23
24#include <bspopts.h>
25
26#include <rtems.h>
27#include <rtems/console.h>
28#include <rtems/clockdrv.h>
29#include <mpc8260.h>
30#include <mpc8260/cpm.h>
31#include <mpc8260/mmu.h>
32#include <mpc8260/console.h>
33#include <bsp/irq.h>
34#include <bsp/vectors.h>
35
36/*
37 * Board configuration registers
38 */
39
40typedef struct bcsr
41
42{
43    uint32_t          bcsr0; /* Board Control and Status Register */
44    uint32_t          bcsr1;
45    uint32_t          bcsr2;
46    uint32_t          bcsr3;
47
48} BCSR;
49
50#define UART1_E 0x02000002              /* bit 6 of BCSR1 */
51#define UART2_E 0x01000001              /* bit 7 of BCSR1 */
52
53#define GP0_LED 0x02000002    /*  bit 6 of BCSR0 */
54#define GP1_LED 0x01000001    /*  bit 7 of BCSR0 */
55
56/*
57 * Network driver configuration
58 */
59struct rtems_bsdnet_ifconfig;
60extern int rtems_enet_driver_attach (struct rtems_bsdnet_ifconfig *config, int attaching);
61#define RTEMS_BSP_NETWORK_DRIVER_NAME   "eth1"
62#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_enet_driver_attach
63
64/* miscellaneous stuff assumed to exist */
65
66/*
67 * We need to decide how much memory will be non-cacheable. This
68 * will mainly be memory that will be used in DMA (network and serial
69 * buffers).
70 */
71/*
72#define NOCACHE_MEM_SIZE 512*1024
73*/
74
75/* Constants */
76/*
77#define RAM_START 0
78#define RAM_END   0x1000000
79*/
80
81/*
82 *  Device Driver Table Entries
83 */
84
85/*
86 * NOTE: Use the standard Console driver entry
87 */
88
89/*
90 * NOTE: Use the standard Clock driver entry
91 */
92
93/*
94 * How many libio files we want
95 */
96
97#define BSP_LIBIO_MAX_FDS       20
98
99/* functions */
100
101#if 0
102void M8260ExecuteRISC( uint32_t         command );
103void *M8260AllocateBufferDescriptors( int count );
104void *M8260AllocateRiscTimers( int count );
105extern char M8260DefaultWatchdogFeeder;
106#endif
107
108rtems_isr_entry set_vector(                    /* returns old vector */
109  rtems_isr_entry     handler,                  /* isr routine        */
110  rtems_vector_number vector,                   /* vector number      */
111  int                 type                      /* RTEMS or RAW intr  */
112);
113
114#ifdef __cplusplus
115}
116#endif
117
118#endif
Note: See TracBrowser for help on using the repository browser.