source: rtems/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h @ 2679eb9d

4.104.114.84.95
Last change on this file since 2679eb9d was 674be421, checked in by Ralf Corsepius <ralf.corsepius@…>, on 03/17/06 at 10:11:37

Remove eof include file

  • Property mode set to 100644
File size: 2.5 KB
Line 
1/*  bsp.h
2 *
3 *  This include file contains all board IO definitions.
4 *
5 *  XXX : put yours in here
6 *
7 *  COPYRIGHT (c) 1989-1999.
8 *  On-Line Applications Research Corporation (OAR).
9 *
10 *  The license and distribution terms for this file may be
11 *  found in the file LICENSE in this distribution or at
12 *  http://www.rtems.com/license/LICENSE.
13 *
14 *  $Id$
15 */
16
17#ifndef _BSP_H
18#define _BSP_H
19
20#ifdef __cplusplus
21extern "C" {
22#endif
23
24#include <bspopts.h>
25
26#include <rtems.h>
27#include <rtems/console.h>
28#include <rtems/clockdrv.h>
29#include <mpc8260.h>
30#include <mpc8260/cpm.h>
31#include <mpc8260/mmu.h>
32#include <mpc8260/console.h>
33#include <bsp/irq.h>
34#include <bsp/vectors.h>
35
36/*
37 * Board configuration registers
38 */
39
40typedef struct bcsr
41
42{
43    uint32_t          bcsr0; /* Board Control and Status Register */
44    uint32_t          bcsr1;
45    uint32_t          bcsr2;
46    uint32_t          bcsr3;
47
48} BCSR;
49
50#define UART1_E 0x02000002              /* bit 6 of BCSR1 */
51#define UART2_E 0x01000001              /* bit 7 of BCSR1 */
52
53#define GP0_LED 0x02000002    /*  bit 6 of BCSR0 */
54#define GP1_LED 0x01000001    /*  bit 7 of BCSR0 */
55
56/*
57 * Network driver configuration
58 */
59struct rtems_bsdnet_ifconfig;
60extern int rtems_enet_driver_attach (struct rtems_bsdnet_ifconfig *config, int attaching);
61#define RTEMS_BSP_NETWORK_DRIVER_NAME   "eth1"
62#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_enet_driver_attach
63
64/* miscellaneous stuff assumed to exist */
65
66extern rtems_configuration_table BSP_Configuration;
67/*
68 * We need to decide how much memory will be non-cacheable. This
69 * will mainly be memory that will be used in DMA (network and serial
70 * buffers).
71 */
72/*
73#define NOCACHE_MEM_SIZE 512*1024
74*/
75
76/* Constants */
77/*
78#define RAM_START 0
79#define RAM_END   0x1000000
80*/
81
82/*
83 *  Device Driver Table Entries
84 */
85
86/*
87 * NOTE: Use the standard Console driver entry
88 */
89
90/*
91 * NOTE: Use the standard Clock driver entry
92 */
93
94/*
95 * How many libio files we want
96 */
97
98#define BSP_LIBIO_MAX_FDS       20
99
100/* functions */
101
102void bsp_cleanup( void );
103
104#if 0
105void M8260ExecuteRISC( uint32_t         command );
106void *M8260AllocateBufferDescriptors( int count );
107void *M8260AllocateRiscTimers( int count );
108extern char M8260DefaultWatchdogFeeder;
109#endif
110
111rtems_isr_entry set_vector(                    /* returns old vector */
112  rtems_isr_entry     handler,                  /* isr routine        */
113  rtems_vector_number vector,                   /* vector number      */
114  int                 type                      /* RTEMS or RAW intr  */
115);
116
117#ifdef __cplusplus
118}
119#endif
120
121#endif
Note: See TracBrowser for help on using the repository browser.