source: rtems/c/src/lib/libbsp/powerpc/motorola_powerpc/ChangeLog @ 7a78028

4.104.114.84.95
Last change on this file since 7a78028 was 7a78028, checked in by Ralf Corsepius <ralf.corsepius@…>, on Dec 17, 2002 at 3:10:36 PM

2002-12-17 Ralf Corsepius <corsepiu@…>

  • bootloader/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • irq/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • motorola/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • openpic/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • pci/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • residual/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • vectors/Makefile.am: Don't include @RTEMS_BSP@.cfg.
  • Property mode set to 100644
File size: 9.0 KB
Line 
12002-12-17      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
2
3        * bootloader/Makefile.am: Don't include @RTEMS_BSP@.cfg.
4        * clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
5        * console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
6        * irq/Makefile.am: Don't include @RTEMS_BSP@.cfg.
7        * motorola/Makefile.am: Don't include @RTEMS_BSP@.cfg.
8        * openpic/Makefile.am: Don't include @RTEMS_BSP@.cfg.
9        * pci/Makefile.am: Don't include @RTEMS_BSP@.cfg.
10        * residual/Makefile.am: Don't include @RTEMS_BSP@.cfg.
11        * start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
12        * startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
13        * vectors/Makefile.am: Don't include @RTEMS_BSP@.cfg.
14
152002-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
16
17        * start/Makefile.am: Use install-data-local to install startfile.
18
192002-12-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
20
21        * wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
22
23002-11-17       Greg Menke <gregory.menke@gsfc.nasa.gov>
24
25        * README.mtx603e: New file.
26
272002-11-14      Greg Menke <gregory.menke@gsfc.nasa.gov>
28
29        * bsp_specs: Added crtbegin,crtend objects so C++ global objects
30        constructors/destructors run correctly. 
31        * startup/linkcmds: Increased code length and updated the ctor/dtor
32        sections to handle crtbegin, crtend objects.
33>       
342002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
35
36        * .cvsignore: Reformat.
37        Add autom4te*cache.
38        Remove autom4te.cache.
39
402002-08-21      Joel Sherrill <joel@OARcorp.com>
41
42        * bsp_specs: Added support for -nostdlibs.
43
442002-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
45
46        * bootloader/Makefile.am: Fix that crappy Makefile.am once again.
47
482002-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
49
50        * bootloader/Makefile.am: Use .$(OBJEXT) instead of .o.
51        * clock/Makefile.am: Use .$(OBJEXT) instead of .o.
52        * console/Makefile.am: Use .$(OBJEXT) instead of .o.
53        * irq/Makefile.am: Use .$(OBJEXT) instead of .o.
54        * motorola/Makefile.am: Use .$(OBJEXT) instead of .o.
55        * openpic/Makefile.am: Use .$(OBJEXT) instead of .o.
56        * pci/Makefile.am: Use .$(OBJEXT) instead of .o.
57        * residual/Makefile.am: Use .$(OBJEXT) instead of .o.
58        * start/Makefile.am: Use .$(OBJEXT) instead of .o.
59        * startup/Makefile.am: Use .$(OBJEXT) instead of .o.
60        * vectors/Makefile.am: Use .$(OBJEXT) instead of .o.
61        * wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
62
632002-07-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
64
65        * bootloader/Makefile.am: Install bootloader.o.
66        Install bootloader/bootloader.ppcboot.lds.
67
682002-07-24      Joel Sherrill <joel@OARcorp.com>
69
70        * vectors/Makefile.am: Install bsp/vectors.h.
71
722002-07-24      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
73
74        * include/Makefile.am: Fix preinstallation.
75        * bootloader: Eliminate $(INCLUDES).
76
772002-07-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
78
79        * start/Makefile.am: Eliminate PGM.
80        Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.
81
822002-07-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
83
84        * startup/Makefile.am: Add bsplib_DATA = linkcmds.
85
862002-07-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
87
88        * wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
89        Remove $(OBJS) from all-local.
90
912002-06-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
92
93        * wrapup/Makefile.am: Remove preinstallation of libbsp.a,
94
952001-05-14      Till Straumann <strauman@slac.stanford.edu>
96
97        * bootloader/Makefile.am, console/Makefile.am, pci/Makefile.am:
98        Per PR216, "libbsp/powerpc/shared" BSP has been modified considerably
99        with the goal to make it more flexible and reusable by other
100        BSPs. The main strategies were:
101            - eliminate hardcoded base addresses; devices use offsets
102              and a BSP defined base address.
103            - separate functionality into different files (e.g. reboot from
104              inch.c to reboot.c) which can be overridden by a 'derived' BSP.
105            - separate initialization code into separate files (e.g.  PCI
106              bridge detection/initialization was separated from the more
107              generic PCI access routines), also to make it easier for
108              'derived' BSPs to substitute their own initialization code.
109        There are also a couple of enhancements and fixes:
110            - IRQ handling code now has a hook for attaching a VME bridge.
111            - OpenPIC is now explicitely initialized (polarities, senses).
112              Eliminated the implicit assumption on the presence of an ISA PIC.
113            - UART and console driver now supports more than 1 port. The current
114              maximum of 2 can easily be extended by enlarging a table (it
115              would even be easier if the ISR API was not broken by design).
116            - fixed polled_io.c so it correctly supports console on COM2
117            - fixed TLB invalidation code (start.S).
118            - exception handler prints a stack backtrace.
119            - added BSP_pciFindDevice() to scan the pci bus for a particular
120              vendor/device/instance.
121
1222001-05-09      Joel Sherrill <joel@OARcorp.com>
123
124        * startup/linkcmds: In support of gcc 3.1, added one of more
125        of the sections .jcr, .rodata*, .data.*, .gnu.linkonce.s2.*,
126        .gnu.linkonce.sb2.*, and .gnu.linkonce.s.*.  Spacing corrections
127        and direction of segments to memory regions may also have been
128        addressed.  This was a sweep across all BSPs.
129 
1302001-04-08      Joel Sherrill <joel@OARcorp.com>
131
132        * startup/linkcmds: Per PR170, PR171, and PR172 add .eh_frame
133 
1342002-04-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
135
136        * bootloader/Makefile.am: Use automake-1.6 AS compilation rules.
137
1382001-04-02      Joel Sherrill <joel@OARcorp.com>
139
140        * bootloader/Makefile.am: Use AM_CCASFLAGS instead of AM_ASFLAGS.
141
1422002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
143
144        * configure.ac:
145        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
146        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
147        * bootloader/Makefile.am: Remove AUTOMAKE_OPTIONS.
148        * Makefile.am: Remove AUTOMAKE_OPTIONS.
149        * clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
150        * console/Makefile.am: Remove AUTOMAKE_OPTIONS.
151        * include/Makefile.am: Remove AUTOMAKE_OPTIONS.
152        * irq/Makefile.am: Remove AUTOMAKE_OPTIONS.
153        * motorola/Makefile.am: Remove AUTOMAKE_OPTIONS.
154        * openpic/Makefile.am: Remove AUTOMAKE_OPTIONS.
155        * pci/Makefile.am: Remove AUTOMAKE_OPTIONS.
156        * residual/Makefile.am: Remove AUTOMAKE_OPTIONS.
157        * start/Makefile.am: Remove AUTOMAKE_OPTIONS.
158        * startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
159        * vectors/Makefile.am: Remove AUTOMAKE_OPTIONS.
160        * wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
161
1622001-12-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
163
164        * configure.ac: Remove RTEMS_ENABLE_NETWORKING.
165
1662001-11-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
167
168        * configure.ac: Introduce RTEMS_BSP_CONFIGURE.
169
1702001-11-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
171
172        * Makefile.am: Add @exceptions@ to SUBDIRS;
173        Remove need_motorola_powerpc.
174        * configure.ac: Apply RTEMS_BSPOPTS_*(*) to merge-in settings from
175        make/custom/mcp750.cfg, make/custom/mvme2307.cfg;
176        Remove need_motorola_powerpc;
177        Add RTEMS_PPC_EXCEPTIONS([new]).
178        * include/Makefile.am: Replace PREINSTALL_FILES with
179        TMPINSTALL_FILES, include force-preinstall.am.
180        * wrapup/Makefile.am: Apply @exceptions@.
181
1822001-11-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
183
184        * configure.ac: Add bspopts.h.
185        * include/.cvsignore: Add stamp-h* and bspopts.h*.
186        * include/Makefile.am: Add bspopts.h.
187        * pci/Makefile.am: Append -O2 to AM_CFLAGS.
188
1892001-11-08      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
190
191        * bootloader/Makefile.am: completely reworked.
192        * configure.ac: Add AM_PROG_AS.
193
1942001-10-25      Joel Sherrill <joel@OARcorp.com>
195
196        * startup/linkcmds: Added _init and _fini.
197
1982001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
199
200        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
201        * configure.in: Remove.
202        * configure.ac: New file, generated from configure.in by autoupdate.
203
2042001-09-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
205
206        * include/Makefile.am: Use 'PREINSTALL_FILES ='.
207        * residual/Makefile.am: Use 'PREINSTALL_FILES ='.
208        * vectors/Makefile.am: Use 'PREINSTALL_FILES ='.
209        * pci/Makefile.am: Use 'PREINSTALL_FILES ='.
210        * openpic/Makefile.am: Use 'PREINSTALL_FILES ='.
211        * bootloader/Makefile.am: Use 'CLEANFILES ='.
212
2132001-05-10      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>
214
215        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
216
2172001-01-03      Emmanuel Raguet <raguet@crf.canon.fr>
218
219        * bootloader/Makefile.am: Modified to install bootloader so
220        make-exe rule can avoid writing to install point or assuming
221        BSP build tree is available.
222
2232000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
224
225        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
226
2272000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
228
229        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
230
2312000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
232
233        * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
234        Switch to GNU canonicalization.
235
2362000-09-29      Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
237
238        * startup/linkcmds: Added lines so DWARF debug information
239        would be available.  Otherwise gdb complains that the offsets
240        for the debug info are incorrect and doesn't load the files.
241
2422000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
243
244        * bootloader/Makefile.am, clock/Makefile.am, console/Makefile.am,
245        irq/Makefile.am, motorola/Makefile.am, openpic/Makefile.am,
246        pci/Makefile.am, residual/Makefile.am, start/Makefile.am,
247        startup/Makefile.am, vectors/Makefile.am, wrapup/Makefile.am:
248        Include compile.am
249
2502000-08-10      Joel Sherrill <joel@OARcorp.com>
251
252        * ChangeLog: New file.
Note: See TracBrowser for help on using the repository browser.