1 | # |
---|
2 | # $Id$ |
---|
3 | # |
---|
4 | |
---|
5 | This file documents the on board monitor (PPCBUG) configuration used |
---|
6 | to be able to boot the archives located in powerpc-rtems/c/mcp750/bin. |
---|
7 | This information was provided by Eric Valette <valette@crf.canon.fr> |
---|
8 | |
---|
9 | ----------------------- ENV command-------------- |
---|
10 | PPC1-Bug>env |
---|
11 | Bug or System environment [B/S] = B? |
---|
12 | Field Service Menu Enable [Y/N] = N? |
---|
13 | Probe System for Supported I/O Controllers [Y/N] = Y? |
---|
14 | Auto-Initialize of NVRAM Header Enable [Y/N] = Y? |
---|
15 | Network PReP-Boot Mode Enable [Y/N] = Y? <==================== |
---|
16 | SCSI Bus Reset on Debugger Startup [Y/N] = N? |
---|
17 | Primary SCSI Bus Negotiations Type [A/S/N] = A? |
---|
18 | Primary SCSI Data Bus Width [W/N] = N? |
---|
19 | Secondary SCSI Identifier = "07"? |
---|
20 | NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N] = Y? |
---|
21 | NVRAM Boot List (GEV.fw-boot-path) Boot at power-up only [Y/N] = Y? |
---|
22 | NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay = 5? |
---|
23 | Auto Boot Enable [Y/N] = Y? |
---|
24 | Auto Boot at power-up only [Y/N] = Y? |
---|
25 | Auto Boot Scan Enable [Y/N] = Y? |
---|
26 | Auto Boot Scan Device Type List = FDISK/CDROM/TAPE/HDISK/? |
---|
27 | Auto Boot Controller LUN = 14? |
---|
28 | Auto Boot Device LUN = 40? |
---|
29 | Auto Boot Partition Number = 03? |
---|
30 | Auto Boot Abort Delay = 7? |
---|
31 | Auto Boot Default String [NULL for an empty string] = ? |
---|
32 | ROM Boot Enable [Y/N] = N? |
---|
33 | ROM Boot at power-up only [Y/N] = Y? |
---|
34 | ROM Boot Abort Delay = 5? |
---|
35 | ROM Boot Direct Starting Address = FFF00000? |
---|
36 | ROM Boot Direct Ending Address = FFFFFFFC? |
---|
37 | Network Auto Boot Enable [Y/N] = N? |
---|
38 | Network Auto Boot at power-up only [Y/N] = N? |
---|
39 | Network Auto Boot Controller LUN = 00? |
---|
40 | Network Auto Boot Device LUN = 00? |
---|
41 | Network Auto Boot Abort Delay = 5? |
---|
42 | Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? |
---|
43 | Memory Size Enable [Y/N] = Y? |
---|
44 | Memory Size Starting Address = 00000000? |
---|
45 | Memory Size Ending Address = 02000000? |
---|
46 | DRAM Speed in NANO Seconds = 60? |
---|
47 | ROM First Access Length (0 - 31) = 10? |
---|
48 | ROM Next Access Length (0 - 15) = 0? |
---|
49 | DRAM Parity Enable [On-Detection/Always/Never - O/A/N] = O? |
---|
50 | L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? |
---|
51 | PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A050000? |
---|
52 | Serial Startup Code Master Enable [Y/N] = N? |
---|
53 | Serial Startup Code LF Enable [Y/N] = N? |
---|
54 | ---------------------NIOT --------------------------- |
---|
55 | PPC1-Bug>niot |
---|
56 | Controller LUN =00? |
---|
57 | Device LUN =00? |
---|
58 | Node Control Memory Address =03F9E000? |
---|
59 | Client IP Address =194.2.81.157? |
---|
60 | Server IP Address =194.2.81.241? |
---|
61 | Subnet IP Address Mask =255.255.255.0? |
---|
62 | Broadcast IP Address =255.255.255.255? |
---|
63 | Gateway IP Address =194.2.81.254? |
---|
64 | Boot File Name ("NULL" for None) =debug-ppc? |
---|
65 | Argument File Name ("NULL" for None) =? |
---|
66 | Boot File Load Address =001F0000? |
---|
67 | Boot File Execution Address =001F0000? |
---|
68 | Boot File Execution Delay =00000000? |
---|
69 | Boot File Length =00000000? |
---|
70 | Boot File Byte Offset =00000000? |
---|
71 | BOOTP/RARP Request Retry =05? |
---|
72 | TFTP/ARP Request Retry =05? |
---|
73 | Trace Character Buffer Address =00000000? |
---|
74 | BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? |
---|
75 | BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y? |
---|
76 | -------------------------------------------------------- |
---|
77 | |
---|
78 | |
---|