source: rtems/c/src/lib/libbsp/powerpc/mbx8xx/startup/setvec.c @ 88ee071

4.104.114.84.95
Last change on this file since 88ee071 was 182712f7, checked in by Joel Sherrill <joel.sherrill@…>, on 10/12/01 at 21:07:01

2001-10-12 Joel Sherrill <joel@…>

  • clock/p_clock.c, include/bsp.h, include/coverhd.h, startup/bspstart.c, startup/bspstart.c.nocache, startup/setvec.c, startup/start.S: Fixed typo.
  • Property mode set to 100644
File size: 1.2 KB
Line 
1/*  set_vector
2 *
3 *  This routine installs an interrupt vector on the target Board/CPU.
4 *  This routine is allowed to be as board dependent as necessary.
5 *
6 *  INPUT:
7 *    handler - interrupt handler entry point
8 *    vector  - vector number
9 *    type    - 0 indicates raw hardware connect
10 *              1 indicates RTEMS interrupt connect
11 *
12 *  RETURNS:
13 *    address of previous interrupt handler
14 *
15 *  COPYRIGHT (c) 1989-1998.
16 *  On-Line Applications Research Corporation (OAR).
17 *
18 *  The license and distribution terms for this file may be
19 *  found in the file LICENSE in this distribution or at
20 *  http://www.OARcorp.com/rtems/license.html.
21 *
22 *  $Id$
23 */
24
25#include <rtems.h>
26#include <bsp.h>
27
28rtems_isr_entry set_vector(                     /* returns old vector */
29  rtems_isr_entry     handler,                  /* isr routine        */
30  rtems_vector_number vector,                   /* vector number      */
31  int                 type                      /* RTEMS or RAW intr  */
32)
33{
34  rtems_isr_entry previous_isr;
35 
36  if (type) {
37    rtems_interrupt_catch(handler, vector, (rtems_isr_entry *) &previous_isr );
38  } else {
39    /* XXX: install non-RTEMS ISR as "raw" interupt */
40  }
41  return previous_isr;
42}
43
Note: See TracBrowser for help on using the repository browser.