1 | /* |
---|
2 | * console.c |
---|
3 | * |
---|
4 | * This file contains the MBX8xx termios serial I/O package. |
---|
5 | * Only asynchronous I/O is supported. |
---|
6 | * |
---|
7 | * The SCCs and SMCs are assigned as follows |
---|
8 | * |
---|
9 | * Channel Device Minor Note |
---|
10 | * SMC1 /dev/tty0 0 |
---|
11 | * SMC2 /dev/tty1 1 |
---|
12 | * SCC1 2 N/A. Hardwired as ethernet port |
---|
13 | * SCC2 /dev/tty2 3 |
---|
14 | * SCC3 /dev/tty3 4 |
---|
15 | * SCC4 /dev/tty4 5 |
---|
16 | * |
---|
17 | * All ports support termios. The use of termios is recommended for real-time |
---|
18 | * applications. Termios provides buffering and input processing. When not |
---|
19 | * using termios, processing is limited to the substitution of LF for CR on |
---|
20 | * input, and the output of a CR following the output of a LF character. |
---|
21 | * Note that the terminal should not send CR/LF pairs when the return key |
---|
22 | * is pressed, and that output lines are terminated with LF/CR, not CR/LF |
---|
23 | * (although that would be easy to change). |
---|
24 | * |
---|
25 | * I/O may be interrupt-driven (recommended for real-time applications) or |
---|
26 | * polled. Polled I/O may be performed by this device driver entirely, or |
---|
27 | * in part by EPPCBug. With EPPCBug 1.1, polled I/O is limited to the |
---|
28 | * EPPCBug debug console. This is a limitation of the firmware. Later |
---|
29 | * firmware may be able to do I/O through any port. This code assumes |
---|
30 | * that the EPPCBug console is the default: SMC1. If the console and |
---|
31 | * printk ports are set to anything else with EPPCBug polled I/O, the |
---|
32 | * system will hang. Only port SMC1 is usable with EPPCBug polled I/O. |
---|
33 | * |
---|
34 | * LIMITATIONS: |
---|
35 | * |
---|
36 | * It is not possible to use different I/O modes on the different ports. The |
---|
37 | * exception is with printk. The printk port can use a different mode from |
---|
38 | * the other ports. If this is done, it is important not to open the printk |
---|
39 | * port from an RTEMS application. |
---|
40 | * |
---|
41 | * Currently, the I/O modes are determined at build time. It would be much |
---|
42 | * better to have the mode selected at boot time based on parameters in |
---|
43 | * NVRAM. |
---|
44 | * |
---|
45 | * Interrupt-driven I/O requires termios. |
---|
46 | * |
---|
47 | * TESTS: |
---|
48 | * |
---|
49 | * TO RUN THE TESTS, USE POLLED I/O WITHOUT TERMIOS SUPPORT. Some tests |
---|
50 | * play with the interrupt masks and turn off I/O. Those tests will hang |
---|
51 | * when interrupt-driven I/O is used. Other tests, such as cdtest, do I/O |
---|
52 | * from the static constructors before the console is open. This test |
---|
53 | * will not work with interrupt-driven I/O. Because of the buffering |
---|
54 | * performed in termios, test output may not be in sequence.The tests |
---|
55 | * should all be fixed to work with interrupt-driven I/O and to |
---|
56 | * produce output in the expected sequence. Obviously, the termios test |
---|
57 | * requires termios support in the driver. |
---|
58 | * |
---|
59 | * Set CONSOLE_MINOR to the appropriate device minor number in the |
---|
60 | * config file. This allows the RTEMS application console to be different |
---|
61 | * from the EPPBug debug console or the GDB port. |
---|
62 | * |
---|
63 | * This driver handles all five available serial ports: it distinguishes |
---|
64 | * the sub-devices using minor device numbers. It is not possible to have |
---|
65 | * other protocols running on the other ports when this driver is used as |
---|
66 | * currently written. |
---|
67 | * |
---|
68 | * Based on code (alloc860.c in eth_comm port) by |
---|
69 | * Jay Monkman (jmonkman@frasca.com), |
---|
70 | * Copyright (C) 1998 by Frasca International, Inc. |
---|
71 | * |
---|
72 | * Modifications by Darlene Stewart <Darlene.Stewart@iit.nrc.ca> |
---|
73 | * and Charles-Antoine Gauthier <charles.gauthier@iit.nrc.ca>. |
---|
74 | * Copyright (c) 2000, National Research Council of Canada |
---|
75 | * |
---|
76 | */ |
---|
77 | #include <stdarg.h> |
---|
78 | #include <stdio.h> |
---|
79 | #include <bsp.h> /* Must be before libio.h */ |
---|
80 | #include <bspIo.h> |
---|
81 | #include <rtems/libio.h> |
---|
82 | #include <termios.h> |
---|
83 | |
---|
84 | static int _EPPCBug_pollRead( int minor ); |
---|
85 | static int _EPPCBug_pollWrite( int minor, const char *buf, int len ); |
---|
86 | static void _BSP_output_char( char c ); |
---|
87 | static rtems_status_code do_poll_read( rtems_device_major_number major, rtems_device_minor_number minor, void * arg); |
---|
88 | static rtems_status_code do_poll_write( rtems_device_major_number major, rtems_device_minor_number minor, void * arg); |
---|
89 | |
---|
90 | |
---|
91 | BSP_output_char_function_type BSP_output_char = _BSP_output_char; |
---|
92 | |
---|
93 | |
---|
94 | /* |
---|
95 | * _EPPCBug_pollRead |
---|
96 | * |
---|
97 | * Read a character from the EPPCBug console, and return it. Return -1 |
---|
98 | * if there is no character in the input FIFO. |
---|
99 | * |
---|
100 | * Input parameters: |
---|
101 | * minor - selected channel |
---|
102 | * |
---|
103 | * Output parameters: NONE |
---|
104 | * |
---|
105 | * Return value: char returned as positive signed int |
---|
106 | * -1 if no character is present in the input FIFO. |
---|
107 | */ |
---|
108 | static int _EPPCBug_pollRead( |
---|
109 | int minor |
---|
110 | ) |
---|
111 | { |
---|
112 | extern volatile m8xx_t m8xx; |
---|
113 | |
---|
114 | char c; |
---|
115 | volatile int simask; /* We must read and write m8xx.simask */ |
---|
116 | int retval; |
---|
117 | ISR_Level level; |
---|
118 | |
---|
119 | struct { |
---|
120 | int clun; |
---|
121 | int dlun; |
---|
122 | char * inbuf; |
---|
123 | int nbytes_requested; |
---|
124 | int reserved; |
---|
125 | } volatile input_params; |
---|
126 | |
---|
127 | struct { |
---|
128 | int status; |
---|
129 | union { |
---|
130 | struct { |
---|
131 | int input_char_available; |
---|
132 | int output_possible; |
---|
133 | int break_detected; |
---|
134 | int modem_status; |
---|
135 | } stat; |
---|
136 | struct { |
---|
137 | int nbytes_received; |
---|
138 | } read; |
---|
139 | } u; |
---|
140 | } volatile output_params; |
---|
141 | |
---|
142 | retval = -1; |
---|
143 | |
---|
144 | input_params.clun = 0; |
---|
145 | |
---|
146 | switch( minor ) { |
---|
147 | case SMC1_MINOR: |
---|
148 | input_params.dlun = 0; /* Should be 4, but doesn't work with EPPCBug 1.1 */ |
---|
149 | break; |
---|
150 | case SMC2_MINOR: |
---|
151 | input_params.dlun = 5; |
---|
152 | break; |
---|
153 | case SCC2_MINOR: |
---|
154 | input_params.dlun = 1; |
---|
155 | break; |
---|
156 | #ifdef mpc860 |
---|
157 | case SCC3_MINOR: |
---|
158 | input_params.dlun = 2; |
---|
159 | break; |
---|
160 | case SCC4_MINOR: |
---|
161 | input_params.dlun = 3; |
---|
162 | break; |
---|
163 | #endif |
---|
164 | default: |
---|
165 | input_params.dlun = 0; |
---|
166 | break; |
---|
167 | } |
---|
168 | |
---|
169 | _ISR_Disable( level ); |
---|
170 | simask = m8xx.simask; |
---|
171 | |
---|
172 | /* Check for a char in the input FIFO using .CIO_STAT */ |
---|
173 | asm volatile( "li 10,0x202 |
---|
174 | mr 3, %0 |
---|
175 | mr 4, %1 |
---|
176 | sc" |
---|
177 | :: "g" (&input_params), "g" (&output_params) : "3", "4", "10" ); |
---|
178 | |
---|
179 | if ( (output_params.status == 0) && output_params.u.stat.input_char_available) { |
---|
180 | |
---|
181 | /* Read the char and return it */ |
---|
182 | input_params.inbuf = &c; |
---|
183 | input_params.nbytes_requested = 1; |
---|
184 | |
---|
185 | asm volatile( "li 10,0x200 /* Code for .CIO_READ */ |
---|
186 | mr 3, %0 /* Address of input_params */ |
---|
187 | mr 4, %1 /* Address of output_params */ |
---|
188 | sc" /* Call EPPCBUG */ |
---|
189 | :: "g" (&input_params), "g" (&output_params) : "3", "4", "10" ); |
---|
190 | |
---|
191 | if ( (output_params.status == 0) && output_params.u.read.nbytes_received) |
---|
192 | retval = (int)c; |
---|
193 | } |
---|
194 | |
---|
195 | m8xx.simask = simask; |
---|
196 | _ISR_Enable( level ); |
---|
197 | return retval; |
---|
198 | } |
---|
199 | |
---|
200 | |
---|
201 | /* |
---|
202 | * _EPPCBug_pollWrite |
---|
203 | * |
---|
204 | * Output buffer through EPPCBug. Returns only once every character has been |
---|
205 | * sent (polled output). |
---|
206 | * |
---|
207 | * Input parameters: |
---|
208 | * minor - selected channel |
---|
209 | * buf - output buffer |
---|
210 | * len - number of chars to output |
---|
211 | * |
---|
212 | * Output parameters: NONE |
---|
213 | * |
---|
214 | * Return value: IGNORED |
---|
215 | */ |
---|
216 | static int _EPPCBug_pollWrite( |
---|
217 | int minor, |
---|
218 | const char *buf, |
---|
219 | int len |
---|
220 | ) |
---|
221 | { |
---|
222 | extern volatile m8xx_t m8xx; |
---|
223 | |
---|
224 | volatile int simask; |
---|
225 | int i, retval; |
---|
226 | ISR_Level level; |
---|
227 | |
---|
228 | struct { |
---|
229 | int clun; |
---|
230 | int dlun; |
---|
231 | const char * outbuf; |
---|
232 | int nbytes_to_output; |
---|
233 | int reserved; |
---|
234 | } volatile input_params; |
---|
235 | |
---|
236 | struct { |
---|
237 | int status; |
---|
238 | union { |
---|
239 | struct { |
---|
240 | int input_char_available; |
---|
241 | int output_possible; |
---|
242 | int break_detected; |
---|
243 | int modem_status; |
---|
244 | } stat; |
---|
245 | struct { |
---|
246 | int nbytes_sent; |
---|
247 | } write; |
---|
248 | } u; |
---|
249 | } volatile output_params; |
---|
250 | |
---|
251 | retval = -1; |
---|
252 | |
---|
253 | input_params.clun = 0; |
---|
254 | input_params.reserved = 0; |
---|
255 | |
---|
256 | switch( minor ) { |
---|
257 | case SMC1_MINOR: |
---|
258 | input_params.dlun = 0; /* Should be 4, but doesn't work with EPPCBug 1.1 */ |
---|
259 | break; |
---|
260 | case SMC2_MINOR: |
---|
261 | input_params.dlun = 5; |
---|
262 | break; |
---|
263 | case SCC2_MINOR: |
---|
264 | input_params.dlun = 1; |
---|
265 | break; |
---|
266 | #ifdef mpc860 |
---|
267 | case SCC3_MINOR: |
---|
268 | input_params.dlun = 2; |
---|
269 | break; |
---|
270 | case SCC4_MINOR: |
---|
271 | input_params.dlun = 3; |
---|
272 | break; |
---|
273 | #endif |
---|
274 | default: |
---|
275 | input_params.dlun = 0; |
---|
276 | break; |
---|
277 | } |
---|
278 | |
---|
279 | i = 0; |
---|
280 | |
---|
281 | _ISR_Disable( level ); |
---|
282 | simask = m8xx.simask; |
---|
283 | |
---|
284 | while (i < len) { |
---|
285 | /* Wait for space in the output buffer */ |
---|
286 | do { |
---|
287 | /* Check for space in the output FIFO */ |
---|
288 | asm volatile( "li 10,0x202 /* Code for .CIO_STAT */ |
---|
289 | mr 3, %0 /* Address of input_params */ |
---|
290 | mr 4, %1 /* Address of output_params */ |
---|
291 | sc" /* Call EPPCBUG */ |
---|
292 | :: "g" (&input_params), "g" (&output_params) : "3", "4", "10" ); |
---|
293 | |
---|
294 | if (output_params.status) |
---|
295 | goto error; |
---|
296 | } while (!output_params.u.stat.output_possible); |
---|
297 | |
---|
298 | /* Output the characters until done */ |
---|
299 | input_params.outbuf = &buf[i]; |
---|
300 | input_params.nbytes_to_output = len - i; |
---|
301 | |
---|
302 | asm volatile( "li 10,0x201 /* Code for .CIO_WRITE */ |
---|
303 | mr 3, %0 /* Address of input_params */ |
---|
304 | mr 4, %1 /* Address of output_params */ |
---|
305 | sc" /* Call EPPCBUG */ |
---|
306 | :: "g" (&input_params), "g" (&output_params) : "3", "4", "10" ); |
---|
307 | |
---|
308 | if (output_params.status) |
---|
309 | goto error; |
---|
310 | |
---|
311 | i += output_params.u.write.nbytes_sent; |
---|
312 | } |
---|
313 | |
---|
314 | /* Return something */ |
---|
315 | m8xx.simask = simask; |
---|
316 | _ISR_Enable( level ); |
---|
317 | return RTEMS_SUCCESSFUL; |
---|
318 | |
---|
319 | error: |
---|
320 | m8xx.simask = simask; |
---|
321 | _ISR_Enable( level ); |
---|
322 | return -1; |
---|
323 | } |
---|
324 | |
---|
325 | |
---|
326 | /* |
---|
327 | * do_poll_read |
---|
328 | * |
---|
329 | * Input characters through polled I/O. Returns has soon as a character has |
---|
330 | * been received. Otherwise, if we wait for the number of requested characters, |
---|
331 | * we could be here forever! |
---|
332 | * |
---|
333 | * CR is converted to LF on input. The terminal should not send a CR/LF pair |
---|
334 | * when the return or enter key is pressed. |
---|
335 | * |
---|
336 | * Input parameters: |
---|
337 | * major - ignored. Should be the major number for this driver. |
---|
338 | * minor - selected channel. |
---|
339 | * arg->buffer - where to put the received characters. |
---|
340 | * arg->count - number of characters to receive before returning--Ignored. |
---|
341 | * |
---|
342 | * Output parameters: |
---|
343 | * arg->bytes_moved - the number of characters read. Always 1. |
---|
344 | * |
---|
345 | * Return value: RTEMS_SUCCESSFUL |
---|
346 | * |
---|
347 | * CANNOT BE COMBINED WITH INTERRUPT DRIVEN I/O! |
---|
348 | */ |
---|
349 | static rtems_status_code do_poll_read( |
---|
350 | rtems_device_major_number major, |
---|
351 | rtems_device_minor_number minor, |
---|
352 | void * arg |
---|
353 | ) |
---|
354 | { |
---|
355 | rtems_libio_rw_args_t *rw_args = arg; |
---|
356 | int c; |
---|
357 | |
---|
358 | #if NVRAM_CONFIGURE == 1 |
---|
359 | |
---|
360 | int (*pollRead)( int minor ); |
---|
361 | |
---|
362 | if ( (nvram->console_mode & 0x06) == 0x04 ) |
---|
363 | pollRead = _EPPCBug_pollRead; |
---|
364 | else |
---|
365 | pollRead = m8xx_uart_pollRead; |
---|
366 | |
---|
367 | while( (c = (*pollRead)(minor)) == -1 ); |
---|
368 | rw_args->buffer[0] = (unsigned8)c; |
---|
369 | if( rw_args->buffer[0] == '\r' ) |
---|
370 | rw_args->buffer[0] = '\n'; |
---|
371 | rw_args->bytes_moved = 1; |
---|
372 | return RTEMS_SUCCESSFUL; |
---|
373 | |
---|
374 | #else |
---|
375 | |
---|
376 | #if UARTS_IO_MODE == 2 |
---|
377 | #define BSP_READ _EPPCBug_pollRead |
---|
378 | #else |
---|
379 | #define BSP_READ m8xx_uart_pollRead |
---|
380 | #endif |
---|
381 | |
---|
382 | while( (c = BSP_READ(minor)) == -1 ); |
---|
383 | rw_args->buffer[0] = (unsigned8)c; |
---|
384 | if( rw_args->buffer[0] == '\r' ) |
---|
385 | rw_args->buffer[0] = '\n'; |
---|
386 | rw_args->bytes_moved = 1; |
---|
387 | return RTEMS_SUCCESSFUL; |
---|
388 | |
---|
389 | #endif |
---|
390 | } |
---|
391 | |
---|
392 | |
---|
393 | /* |
---|
394 | * do_poll_write |
---|
395 | * |
---|
396 | * Output characters through polled I/O. Returns only once every character has |
---|
397 | * been sent. |
---|
398 | * |
---|
399 | * CR is transmitted AFTER a LF on output. |
---|
400 | * |
---|
401 | * Input parameters: |
---|
402 | * major - ignored. Should be the major number for this driver. |
---|
403 | * minor - selected channel |
---|
404 | * arg->buffer - where to get the characters to transmit. |
---|
405 | * arg->count - the number of characters to transmit before returning. |
---|
406 | * |
---|
407 | * Output parameters: |
---|
408 | * arg->bytes_moved - the number of characters read |
---|
409 | * |
---|
410 | * Return value: RTEMS_SUCCESSFUL |
---|
411 | * |
---|
412 | * CANNOT BE COMBINED WITH INTERRUPT DRIVEN I/O! |
---|
413 | */ |
---|
414 | static rtems_status_code do_poll_write( |
---|
415 | rtems_device_major_number major, |
---|
416 | rtems_device_minor_number minor, |
---|
417 | void * arg |
---|
418 | ) |
---|
419 | { |
---|
420 | rtems_libio_rw_args_t *rw_args = arg; |
---|
421 | unsigned32 i; |
---|
422 | char cr ='\r'; |
---|
423 | |
---|
424 | #if NVRAM_CONFIGURE == 1 |
---|
425 | |
---|
426 | int (*pollWrite)(int minor, const char *buf, int len); |
---|
427 | |
---|
428 | if ( (nvram->console_mode & 0x06) == 0x04 ) |
---|
429 | pollWrite = _EPPCBug_pollWrite; |
---|
430 | else |
---|
431 | pollWrite = m8xx_uart_pollWrite; |
---|
432 | |
---|
433 | for( i = 0; i < rw_args->count; i++ ) { |
---|
434 | (*pollWrite)(minor, &(rw_args->buffer[i]), 1); |
---|
435 | if ( rw_args->buffer[i] == '\n' ) |
---|
436 | (*pollWrite)(minor, &cr, 1); |
---|
437 | } |
---|
438 | rw_args->bytes_moved = i; |
---|
439 | return RTEMS_SUCCESSFUL; |
---|
440 | |
---|
441 | #else |
---|
442 | |
---|
443 | #if UARTS_IO_MODE == 2 |
---|
444 | #define BSP_WRITE _EPPCBug_pollWrite |
---|
445 | #else |
---|
446 | #define BSP_WRITE m8xx_uart_pollWrite |
---|
447 | #endif |
---|
448 | |
---|
449 | for( i = 0; i < rw_args->count; i++ ) { |
---|
450 | BSP_WRITE(minor, &(rw_args->buffer[i]), 1); |
---|
451 | if ( rw_args->buffer[i] == '\n' ) |
---|
452 | BSP_WRITE(minor, &cr, 1); |
---|
453 | } |
---|
454 | rw_args->bytes_moved = i; |
---|
455 | return RTEMS_SUCCESSFUL; |
---|
456 | |
---|
457 | #endif |
---|
458 | } |
---|
459 | |
---|
460 | |
---|
461 | /* |
---|
462 | * Print functions prototyped in bspIo.h |
---|
463 | */ |
---|
464 | |
---|
465 | static void _BSP_output_char( char c ) |
---|
466 | { |
---|
467 | char cr = '\r'; |
---|
468 | |
---|
469 | /* |
---|
470 | * Can't rely on console_initialize having been called before this function |
---|
471 | * is used, so it may fail unless output is done through EPPC-Bug. |
---|
472 | */ |
---|
473 | #if NVRAM_CONFIGURE == 1 |
---|
474 | |
---|
475 | rtems_device_minor_number printk_minor; |
---|
476 | |
---|
477 | /* Use NVRAM info for configuration */ |
---|
478 | printk_minor = (nvram->console_printk_port & 0x70) >> 4; |
---|
479 | if( (nvram->console_mode & 0x30) == 0x20 ) { |
---|
480 | _EPPCBug_pollWrite( printk_minor, &c, 1 ); |
---|
481 | if( c == '\n' ) |
---|
482 | _EPPCBug_pollWrite( printk_minor, &cr, 1 ); |
---|
483 | } |
---|
484 | else { |
---|
485 | m8xx_uart_pollWrite( printk_minor, &c, 1 ); |
---|
486 | if( c == '\n' ) |
---|
487 | m8xx_uart_pollWrite( PRINTK_MINOR, &cr, 1 ); |
---|
488 | } |
---|
489 | |
---|
490 | #else |
---|
491 | |
---|
492 | #if PRINTK_IO_MODE == 2 |
---|
493 | #define PRINTK_WRITE _EPPCBug_pollWrite |
---|
494 | #else |
---|
495 | #define PRINTK_WRITE m8xx_uart_pollWrite |
---|
496 | #endif |
---|
497 | |
---|
498 | PRINTK_WRITE( PRINTK_MINOR, &c, 1 ); |
---|
499 | if( c == '\n' ) |
---|
500 | PRINTK_WRITE( PRINTK_MINOR, &cr, 1 ); |
---|
501 | |
---|
502 | #endif |
---|
503 | } |
---|
504 | |
---|
505 | |
---|
506 | /* |
---|
507 | *************** |
---|
508 | * BOILERPLATE * |
---|
509 | *************** |
---|
510 | * |
---|
511 | * All these functions are prototyped in rtems/c/src/lib/include/console.h. |
---|
512 | */ |
---|
513 | |
---|
514 | /* |
---|
515 | * Initialize and register the device |
---|
516 | */ |
---|
517 | rtems_device_driver console_initialize( |
---|
518 | rtems_device_major_number major, |
---|
519 | rtems_device_minor_number minor, |
---|
520 | void *arg |
---|
521 | ) |
---|
522 | { |
---|
523 | rtems_status_code status; |
---|
524 | rtems_device_minor_number console_minor; |
---|
525 | |
---|
526 | /* |
---|
527 | * Set up TERMIOS if needed |
---|
528 | */ |
---|
529 | #if NVRAM_CONFIGURE == 1 |
---|
530 | /* Use NVRAM info for configuration */ |
---|
531 | console_minor = nvram->console_printk_port & 0x07; |
---|
532 | |
---|
533 | if ( nvram->console_mode & 0x01 ) |
---|
534 | /* termios */ |
---|
535 | rtems_termios_initialize (); |
---|
536 | |
---|
537 | /* |
---|
538 | * Do common initialization. |
---|
539 | */ |
---|
540 | m8xx_uart_initialize(); |
---|
541 | |
---|
542 | /* |
---|
543 | * Do device-specific initialization |
---|
544 | */ |
---|
545 | if ( !nvram->eppcbug_smc1 && |
---|
546 | ( ((nvram->console_mode & 0x30) != 0x20) || |
---|
547 | (((nvram->console_printk_port & 0x30) >> 4) != SMC1_MINOR) ) ) |
---|
548 | m8xx_uart_smc_initialize(SMC1_MINOR); /* /dev/tty0 */ |
---|
549 | |
---|
550 | if ( ((nvram->console_mode & 0x30) != 0x20) || |
---|
551 | (((nvram->console_printk_port & 0x30) >> 4) != SMC2_MINOR) ) |
---|
552 | m8xx_uart_smc_initialize(SMC2_MINOR); /* /dev/tty1 */ |
---|
553 | |
---|
554 | if ( ((nvram->console_mode & 0x30) != 0x20) || |
---|
555 | (((nvram->console_printk_port & 0x30) >> 4) != SCC2_MINOR) ) |
---|
556 | m8xx_uart_scc_initialize(SCC2_MINOR); /* /dev/tty2 */ |
---|
557 | |
---|
558 | #ifdef mpc860 |
---|
559 | |
---|
560 | if ( ((nvram->console_mode & 0x30) != 0x20) || |
---|
561 | (((nvram->console_printk_port & 0x30) >> 4) != SCC3_MINOR) ) |
---|
562 | m8xx_uart_scc_initialize(SCC3_MINOR); /* /dev/tty3 */ |
---|
563 | |
---|
564 | if ( ((nvram->console_mode & 0x30) != 0x20) || |
---|
565 | (((nvram->console_printk_port & 0x30) >> 4) != SCC4_MINOR) ) |
---|
566 | m8xx_uart_scc_initialize(SCC4_MINOR); /* /dev/tty4 */ |
---|
567 | |
---|
568 | #endif /* mpc860 */ |
---|
569 | |
---|
570 | #else /* NVRAM_CONFIGURE != 1 */ |
---|
571 | |
---|
572 | console_minor = CONSOLE_MINOR; |
---|
573 | |
---|
574 | #if UARTS_USE_TERMIOS == 1 |
---|
575 | |
---|
576 | rtems_termios_initialize (); |
---|
577 | |
---|
578 | #endif /* UARTS_USE_TERMIOS */ |
---|
579 | |
---|
580 | /* |
---|
581 | * Do common initialization. |
---|
582 | */ |
---|
583 | m8xx_uart_initialize(); |
---|
584 | |
---|
585 | /* |
---|
586 | * Do device-specific initialization |
---|
587 | */ |
---|
588 | #if !defined(EPPCBUG_SMC1) && ( PRINTK_IO_MODE != 2 || PRINTK_MINOR != SMC1_MINOR ) |
---|
589 | m8xx_uart_smc_initialize(SMC1_MINOR); /* /dev/tty0 */ |
---|
590 | #endif |
---|
591 | |
---|
592 | #if PRINTK_IO_MODE != 2 || PRINTK_MINOR != SMC2_MINOR |
---|
593 | m8xx_uart_smc_initialize(SMC2_MINOR); /* /dev/tty1 */ |
---|
594 | #endif |
---|
595 | |
---|
596 | #if PRINTK_IO_MODE != 2 || PRINTK_MINOR != SCC2_MINOR |
---|
597 | m8xx_uart_scc_initialize(SCC2_MINOR); /* /dev/tty2 */ |
---|
598 | #endif |
---|
599 | |
---|
600 | #ifdef mpc860 |
---|
601 | |
---|
602 | #if PRINTK_IO_MODE != 2 || PRINTK_MINOR != SCC3_MINOR |
---|
603 | m8xx_uart_scc_initialize(SCC3_MINOR); /* /dev/tty3 */ |
---|
604 | #endif |
---|
605 | |
---|
606 | #if PRINTK_IO_MODE != 2 || PRINTK_MINOR != SCC4_MINOR |
---|
607 | m8xx_uart_scc_initialize(SCC4_MINOR); /* /dev/tty4 */ |
---|
608 | #endif |
---|
609 | |
---|
610 | #endif /* mpc860 */ |
---|
611 | |
---|
612 | #endif /* NVRAM_CONFIGURE != 1 */ |
---|
613 | |
---|
614 | |
---|
615 | /* |
---|
616 | * Set up interrupts |
---|
617 | */ |
---|
618 | m8xx_uart_interrupts_initialize(); |
---|
619 | |
---|
620 | status = rtems_io_register_name ("/dev/tty0", major, SMC1_MINOR); |
---|
621 | if (status != RTEMS_SUCCESSFUL) |
---|
622 | rtems_fatal_error_occurred (status); |
---|
623 | |
---|
624 | status = rtems_io_register_name ("/dev/tty1", major, SMC2_MINOR); |
---|
625 | if (status != RTEMS_SUCCESSFUL) |
---|
626 | rtems_fatal_error_occurred (status); |
---|
627 | |
---|
628 | status = rtems_io_register_name ("/dev/tty2", major, SCC2_MINOR); |
---|
629 | if (status != RTEMS_SUCCESSFUL) |
---|
630 | rtems_fatal_error_occurred (status); |
---|
631 | |
---|
632 | #ifdef mpc860 |
---|
633 | status = rtems_io_register_name ("/dev/tty3", major, SCC3_MINOR); |
---|
634 | if (status != RTEMS_SUCCESSFUL) |
---|
635 | rtems_fatal_error_occurred (status); |
---|
636 | |
---|
637 | status = rtems_io_register_name ("/dev/tty4", major, SCC4_MINOR); |
---|
638 | if (status != RTEMS_SUCCESSFUL) |
---|
639 | rtems_fatal_error_occurred (status); |
---|
640 | |
---|
641 | #endif /* mpc860 */ |
---|
642 | |
---|
643 | /* Now register the RTEMS console */ |
---|
644 | status = rtems_io_register_name ("/dev/console", major, console_minor); |
---|
645 | if (status != RTEMS_SUCCESSFUL) |
---|
646 | rtems_fatal_error_occurred (status); |
---|
647 | |
---|
648 | return RTEMS_SUCCESSFUL; |
---|
649 | } |
---|
650 | |
---|
651 | |
---|
652 | /* |
---|
653 | * Open the device |
---|
654 | */ |
---|
655 | rtems_device_driver console_open( |
---|
656 | rtems_device_major_number major, |
---|
657 | rtems_device_minor_number minor, |
---|
658 | void *arg |
---|
659 | ) |
---|
660 | { |
---|
661 | /* Used to track termios private data for callbacks */ |
---|
662 | extern struct rtems_termios_tty *ttyp[]; |
---|
663 | |
---|
664 | rtems_libio_open_close_args_t *args = arg; |
---|
665 | rtems_status_code sc; |
---|
666 | |
---|
667 | static const rtems_termios_callbacks sccEPPCBugCallbacks = { |
---|
668 | NULL, /* firstOpen */ |
---|
669 | NULL, /* lastClose */ |
---|
670 | _EPPCBug_pollRead, /* pollRead */ |
---|
671 | _EPPCBug_pollWrite, /* write */ |
---|
672 | NULL, /* stopRemoteTx */ |
---|
673 | NULL, /* startRemoteTx */ |
---|
674 | 0 /* outputUsesInterrupts */ |
---|
675 | }; |
---|
676 | |
---|
677 | static const rtems_termios_callbacks intrCallbacks = { |
---|
678 | NULL, /* firstOpen */ |
---|
679 | NULL, /* lastClose */ |
---|
680 | NULL, /* pollRead */ |
---|
681 | m8xx_uart_write, /* write */ |
---|
682 | m8xx_uart_setAttributes, /* setAttributes */ |
---|
683 | NULL, /* stopRemoteTx */ |
---|
684 | NULL, /* startRemoteTx */ |
---|
685 | 1 /* outputUsesInterrupts */ |
---|
686 | }; |
---|
687 | |
---|
688 | static const rtems_termios_callbacks pollCallbacks = { |
---|
689 | NULL, /* firstOpen */ |
---|
690 | NULL, /* lastClose */ |
---|
691 | m8xx_uart_pollRead, /* pollRead */ |
---|
692 | m8xx_uart_pollWrite, /* write */ |
---|
693 | m8xx_uart_setAttributes, /* setAttributes */ |
---|
694 | NULL, /* stopRemoteTx */ |
---|
695 | NULL, /* startRemoteTx */ |
---|
696 | 0 /* outputUsesInterrupts */ |
---|
697 | }; |
---|
698 | |
---|
699 | if ( minor > NUM_PORTS-1 ) |
---|
700 | return RTEMS_INVALID_NUMBER; |
---|
701 | |
---|
702 | #if NVRAM_CONFIGURE == 1 |
---|
703 | |
---|
704 | /* Use NVRAM info for configuration */ |
---|
705 | if ( nvram->console_mode & 0x01 ) { |
---|
706 | /* Use termios */ |
---|
707 | if ( (nvram->console_mode & 0x06) == 0x02 ) { |
---|
708 | /* interrupt-driven I/O */ |
---|
709 | sc = rtems_termios_open( major, minor, arg, &intrCallbacks ); |
---|
710 | ttyp[minor] = args->iop->data1; /* Keep cookie returned by termios_open */ |
---|
711 | return sc; |
---|
712 | } |
---|
713 | else if ( (nvram->console_mode & 0x06) == 0x04 ) |
---|
714 | /* polled I/O through EPPC-Bug, better be through SMC1 */ |
---|
715 | return rtems_termios_open( major, minor, arg, &sccEPPCBugCallbacks ); |
---|
716 | else |
---|
717 | /* normal polled I/O */ |
---|
718 | return rtems_termios_open( major, minor, arg, &pollCallbacks ); |
---|
719 | } |
---|
720 | else |
---|
721 | /* no termios -- default to polled I/O */ |
---|
722 | return RTEMS_SUCCESSFUL; |
---|
723 | |
---|
724 | #else /* NVRAM_CONFIGURE != 1 */ |
---|
725 | |
---|
726 | #if UARTS_USE_TERMIOS == 1 |
---|
727 | |
---|
728 | #if UARTS_IO_MODE == 2 /* EPPCBug polled I/O with termios */ |
---|
729 | sc = rtems_termios_open( major, minor, arg, &sccEPPCBugCallbacks ); |
---|
730 | #elif UARTS_IO_MODE == 1 /* RTEMS interrupt-driven I/O with termios */ |
---|
731 | sc = rtems_termios_open( major, minor, arg, &intrCallbacks ); |
---|
732 | ttyp[minor] = args->iop->data1; /* Keep cookie returned by termios_open */ |
---|
733 | #else /* RTEMS polled I/O with termios */ |
---|
734 | sc = rtems_termios_open( major, minor, arg, &pollCallbacks ); |
---|
735 | #endif |
---|
736 | |
---|
737 | #else /* UARTS_USE_TERMIOS != 1 */ |
---|
738 | /* no termios -- default to polled I/O */ |
---|
739 | sc = RTEMS_SUCCESSFUL; |
---|
740 | #endif /* UARTS_USE_TERMIOS != 1 */ |
---|
741 | |
---|
742 | return sc; |
---|
743 | |
---|
744 | #endif /* NVRAM_CONFIGURE != 1 */ |
---|
745 | } |
---|
746 | |
---|
747 | |
---|
748 | /* |
---|
749 | * Close the device |
---|
750 | */ |
---|
751 | rtems_device_driver console_close( |
---|
752 | rtems_device_major_number major, |
---|
753 | rtems_device_minor_number minor, |
---|
754 | void *arg |
---|
755 | ) |
---|
756 | { |
---|
757 | if ( minor > NUM_PORTS-1 ) |
---|
758 | return RTEMS_INVALID_NUMBER; |
---|
759 | |
---|
760 | #if NVRAM_CONFIGURE == 1 |
---|
761 | |
---|
762 | /* Use NVRAM info for configuration */ |
---|
763 | if ( nvram->console_mode & 0x01 ) |
---|
764 | /* use termios */ |
---|
765 | return rtems_termios_close( arg ); |
---|
766 | else |
---|
767 | /* no termios */ |
---|
768 | return RTEMS_SUCCESSFUL; |
---|
769 | |
---|
770 | #else /* NVRAM_CONFIGURE != 1 */ |
---|
771 | |
---|
772 | #if UARTS_USE_TERMIOS == 1 |
---|
773 | return rtems_termios_close( arg ); |
---|
774 | #else |
---|
775 | return RTEMS_SUCCESSFUL; |
---|
776 | #endif |
---|
777 | |
---|
778 | #endif /* NVRAM_CONFIGURE != 1 */ |
---|
779 | } |
---|
780 | |
---|
781 | |
---|
782 | /* |
---|
783 | * Read from the device |
---|
784 | */ |
---|
785 | rtems_device_driver console_read( |
---|
786 | rtems_device_major_number major, |
---|
787 | rtems_device_minor_number minor, |
---|
788 | void *arg |
---|
789 | ) |
---|
790 | { |
---|
791 | if ( minor > NUM_PORTS-1 ) |
---|
792 | return RTEMS_INVALID_NUMBER; |
---|
793 | |
---|
794 | #if NVRAM_CONFIGURE == 1 |
---|
795 | |
---|
796 | /* Use NVRAM info for configuration */ |
---|
797 | if ( nvram->console_mode & 0x01 ) |
---|
798 | /* use termios */ |
---|
799 | return rtems_termios_read( arg ); |
---|
800 | else |
---|
801 | /* no termios -- default to polled */ |
---|
802 | return do_poll_read( major, minor, arg ); |
---|
803 | |
---|
804 | #else |
---|
805 | |
---|
806 | #if UARTS_USE_TERMIOS == 1 |
---|
807 | return rtems_termios_read( arg ); |
---|
808 | #else |
---|
809 | return do_poll_read( major, minor, arg ); |
---|
810 | #endif |
---|
811 | |
---|
812 | #endif |
---|
813 | } |
---|
814 | |
---|
815 | |
---|
816 | /* |
---|
817 | * Write to the device |
---|
818 | */ |
---|
819 | rtems_device_driver console_write( |
---|
820 | rtems_device_major_number major, |
---|
821 | rtems_device_minor_number minor, |
---|
822 | void *arg |
---|
823 | ) |
---|
824 | { |
---|
825 | if ( minor > NUM_PORTS-1 ) |
---|
826 | return RTEMS_INVALID_NUMBER; |
---|
827 | |
---|
828 | #if NVRAM_CONFIGURE == 1 |
---|
829 | |
---|
830 | /* Use NVRAM info for configuration */ |
---|
831 | if ( nvram->console_mode & 0x01 ) |
---|
832 | /* use termios */ |
---|
833 | return rtems_termios_write( arg ); |
---|
834 | else |
---|
835 | /* no termios -- default to polled */ |
---|
836 | return do_poll_write( major, minor, arg ); |
---|
837 | |
---|
838 | #else |
---|
839 | |
---|
840 | #if UARTS_USE_TERMIOS == 1 |
---|
841 | return rtems_termios_write( arg ); |
---|
842 | #else |
---|
843 | /* no termios -- default to polled */ |
---|
844 | return do_poll_write( major, minor, arg ); |
---|
845 | #endif |
---|
846 | |
---|
847 | #endif |
---|
848 | } |
---|
849 | |
---|
850 | |
---|
851 | /* |
---|
852 | * Handle ioctl request. |
---|
853 | */ |
---|
854 | rtems_device_driver console_control( |
---|
855 | rtems_device_major_number major, |
---|
856 | rtems_device_minor_number minor, |
---|
857 | void *arg |
---|
858 | ) |
---|
859 | { |
---|
860 | if ( minor > NUM_PORTS-1 ) |
---|
861 | return RTEMS_INVALID_NUMBER; |
---|
862 | |
---|
863 | #if NVRAM_CONFIGURE == 1 |
---|
864 | |
---|
865 | /* Uuse NVRAM info for configuration */ |
---|
866 | if ( nvram->console_mode & 0x01 ) |
---|
867 | /* termios */ |
---|
868 | return rtems_termios_ioctl( arg ); |
---|
869 | else |
---|
870 | /* no termios -- default to polled */ |
---|
871 | return RTEMS_SUCCESSFUL; |
---|
872 | |
---|
873 | #else |
---|
874 | |
---|
875 | #if UARTS_USE_TERMIOS == 1 |
---|
876 | return rtems_termios_ioctl( arg ); |
---|
877 | #else |
---|
878 | return RTEMS_SUCCESSFUL; |
---|
879 | #endif |
---|
880 | |
---|
881 | #endif |
---|
882 | } |
---|
883 | |
---|