| 1 | ## Process this file with autoconf to produce a configure script. |
|---|
| 2 | |
|---|
| 3 | AC_PREREQ([2.69]) |
|---|
| 4 | AC_INIT([rtems-c-src-lib-libbsp-powerpc-gen83xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) |
|---|
| 5 | AC_CONFIG_SRCDIR([make/custom/br_uid.cfg]) |
|---|
| 6 | RTEMS_TOP(../../../../../..) |
|---|
| 7 | |
|---|
| 8 | RTEMS_CANONICAL_TARGET_CPU |
|---|
| 9 | AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2]) |
|---|
| 10 | RTEMS_BSP_CONFIGURE |
|---|
| 11 | |
|---|
| 12 | RTEMS_PROG_CC_FOR_TARGET |
|---|
| 13 | RTEMS_CANONICALIZE_TOOLS |
|---|
| 14 | RTEMS_PROG_CCAS |
|---|
| 15 | |
|---|
| 16 | RTEMS_BSPOPTS_SET_DATA_CACHE_ENABLED([*],[1]) |
|---|
| 17 | RTEMS_BSPOPTS_HELP_DATA_CACHE_ENABLED |
|---|
| 18 | |
|---|
| 19 | RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1]) |
|---|
| 20 | RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED |
|---|
| 21 | |
|---|
| 22 | RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1]) |
|---|
| 23 | RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin]) |
|---|
| 24 | |
|---|
| 25 | RTEMS_BSPOPTS_SET([MPC83XX_BOARD_MPC8313ERDB],[mpc8313erdb],[1]) |
|---|
| 26 | RTEMS_BSPOPTS_HELP([MPC83XX_BOARD_MPC8313ERDB], |
|---|
| 27 | [if defined, then use settings for the MPC8313ERDB board]) |
|---|
| 28 | |
|---|
| 29 | RTEMS_BSPOPTS_SET([MPC83XX_BOARD_MPC8349EAMDS],[mpc8349eamds],[1]) |
|---|
| 30 | RTEMS_BSPOPTS_HELP([MPC83XX_BOARD_MPC8349EAMDS], |
|---|
| 31 | [if defined, then use settings for the MPC8349EAMDS board]) |
|---|
| 32 | |
|---|
| 33 | RTEMS_BSPOPTS_SET([MPC83XX_BOARD_HSC_CM01],[hsc_cm01],[1]) |
|---|
| 34 | RTEMS_BSPOPTS_HELP([MPC83XX_BOARD_HSC_CM01], |
|---|
| 35 | [if defined, then use settings for the HSC_CM01 board]) |
|---|
| 36 | |
|---|
| 37 | RTEMS_BSPOPTS_SET([MPC83XX_BOARD_MPC8309SOM],[mpc8309som],[1]) |
|---|
| 38 | RTEMS_BSPOPTS_HELP([MPC83XX_BOARD_MPC8309SOM], |
|---|
| 39 | [if defined, then use settings for the MPC8309SOM board]) |
|---|
| 40 | |
|---|
| 41 | RTEMS_BSPOPTS_SET([MPC83XX_BOARD_BR_UID],[br_uid],[1]) |
|---|
| 42 | RTEMS_BSPOPTS_HELP([MPC83XX_BOARD_BR_UID], |
|---|
| 43 | [if defined, then use settings for the BR UID board]) |
|---|
| 44 | |
|---|
| 45 | RTEMS_BSPOPTS_SET([MPC83XX_NETWORK_INTERFACE_0_PHY_ADDR],[mpc8309som],[0x11]) |
|---|
| 46 | RTEMS_BSPOPTS_SET([MPC83XX_NETWORK_INTERFACE_0_PHY_ADDR],[br_uid],[-1]) |
|---|
| 47 | RTEMS_BSPOPTS_HELP([MPC83XX_NETWORK_INTERFACE_0_PHY_ADDR], |
|---|
| 48 | [PHY address of network interface 0]) |
|---|
| 49 | |
|---|
| 50 | RTEMS_BSPOPTS_SET([MPC83XX_CHIP_TYPE],[mpc8309som],[8309]) |
|---|
| 51 | RTEMS_BSPOPTS_SET([MPC83XX_CHIP_TYPE],[br_uid],[8309]) |
|---|
| 52 | RTEMS_BSPOPTS_SET([MPC83XX_CHIP_TYPE],[mpc8349eamds],[8349]) |
|---|
| 53 | RTEMS_BSPOPTS_SET([MPC83XX_CHIP_TYPE],[hsc_cm01],[8349]) |
|---|
| 54 | RTEMS_BSPOPTS_SET([MPC83XX_CHIP_TYPE],[*],[8313]) |
|---|
| 55 | RTEMS_BSPOPTS_HELP([MPC83XX_CHIP_TYPE],[chip type of the MPC83XX family]) |
|---|
| 56 | |
|---|
| 57 | RTEMS_BSPOPTS_SET([MPC83XX_HAS_NAND_LP_FLASH_ON_CS0],[br_uid],[1]) |
|---|
| 58 | RTEMS_BSPOPTS_SET([MPC83XX_HAS_NAND_LP_FLASH_ON_CS0],[*],[]) |
|---|
| 59 | RTEMS_BSPOPTS_HELP([MPC83XX_HAS_NAND_LP_FLASH_ON_CS0],[indicates if the board has a NAND large page flash on chip select 0]) |
|---|
| 60 | |
|---|
| 61 | RTEMS_BSPOPTS_SET([BSP_CONSOLE_BAUD],[hsc_cm01],[9600]) |
|---|
| 62 | RTEMS_BSPOPTS_SET([BSP_CONSOLE_BAUD],[*],[115200]) |
|---|
| 63 | RTEMS_BSPOPTS_HELP([BSP_CONSOLE_BAUD],[default baud for console and other serial devices]) |
|---|
| 64 | |
|---|
| 65 | RTEMS_BSPOPTS_SET([BSP_USE_UART_INTERRUPTS],[hsc_cm01],[]) |
|---|
| 66 | RTEMS_BSPOPTS_SET([BSP_USE_UART_INTERRUPTS],[*],[1]) |
|---|
| 67 | RTEMS_BSPOPTS_HELP([BSP_USE_UART_INTERRUPTS],[enable usage of interrupts for the UART modules]) |
|---|
| 68 | |
|---|
| 69 | RTEMS_BSPOPTS_SET([BSP_USE_UART2],[*],[1]) |
|---|
| 70 | RTEMS_BSPOPTS_HELP([BSP_USE_UART2],[if defined, enables UART2]) |
|---|
| 71 | |
|---|
| 72 | RTEMS_BSPOPTS_SET([HAS_UBOOT],[mpc8309som],[1]) |
|---|
| 73 | RTEMS_BSPOPTS_SET([HAS_UBOOT],[mpc8313erdb],[1]) |
|---|
| 74 | RTEMS_BSPOPTS_SET([HAS_UBOOT],[mpc8349eamds],[1]) |
|---|
| 75 | RTEMS_BSPOPTS_HELP([HAS_UBOOT],[if defined, enables U-Boot support]) |
|---|
| 76 | |
|---|
| 77 | # Disable interrupt nesting for the interrupt server support. The interrupt |
|---|
| 78 | # server is necessary for the USB stack. |
|---|
| 79 | RTEMS_BSPOPTS_SET([GEN83XX_ENABLE_INTERRUPT_NESTING],[mpc8313erdb],[]) |
|---|
| 80 | RTEMS_BSPOPTS_SET([GEN83XX_ENABLE_INTERRUPT_NESTING],[br_uid],[]) |
|---|
| 81 | RTEMS_BSPOPTS_SET([GEN83XX_ENABLE_INTERRUPT_NESTING],[*],[1]) |
|---|
| 82 | RTEMS_BSPOPTS_HELP([GEN83XX_ENABLE_INTERRUPT_NESTING],[enable interrupt nesting]) |
|---|
| 83 | |
|---|
| 84 | RTEMS_BSPOPTS_SET([BSP_USB_EHCI_MPC83XX_HAS_ULPI],[br_uid],[1]) |
|---|
| 85 | RTEMS_BSPOPTS_HELP([BSP_USB_EHCI_MPC83XX_HAS_ULPI],[the board has an ULPI PHY connected to the USB EHCI controller]) |
|---|
| 86 | |
|---|
| 87 | RTEMS_CHECK_NETWORKING |
|---|
| 88 | AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") |
|---|
| 89 | |
|---|
| 90 | # Explicitly list all Makefiles here |
|---|
| 91 | AC_CONFIG_FILES([Makefile]) |
|---|
| 92 | |
|---|
| 93 | RTEMS_BSP_BOOTCARD_OPTIONS |
|---|
| 94 | RTEMS_BSP_CLEANUP_OPTIONS |
|---|
| 95 | RTEMS_BSP_LINKCMDS |
|---|
| 96 | |
|---|
| 97 | RTEMS_PPC_EXCEPTIONS |
|---|
| 98 | |
|---|
| 99 | AC_OUTPUT |
|---|
![[RTEMS Logo]](/images/logo.png){kind=logo}
