2008-11-18 Thomas Doerfler * include/bsp.h, include/hwreg_vals.h, network/network.c: correct some init values for HSC_CM01 boards change strategy to determine MAC address 2008-11-13 Sebastian Huber * console/console.c: Update for new NS16550 polled write function. 2008-10-02 Joel Sherrill * Makefile.am, preinstall.am: Use shared stub coverhd.h * include/coverhd.h: Removed. 2008-10-02 Ralf Corsépius * configure.ac: Move MPC8313ERDB, MPC8349EAMDS, HSC_CM01, MPC8349 defines from *.cfg into bspopts.h. 2008-10-01 Ralf Corsépius * include/bsp.h: #include first. 2008-09-29 Ralf Corsépius * Makefile.am: Eliminate bsp.am. Build startup files as side-effect of building libbspstart.a, using automake-rules. 2008-09-29 Ralf Corsépius * Makefile.am: Eliminate *_SOURCES. 2008-09-29 Ralf Corsépius * Makefile.am: Move noinst_LIBRARIES = libbsp.a before its components. 2008-09-26 Ralf Corsépius * Makefile.am: Cleanup ../../shared/include/bootcard.h handling. 2008-09-25 Joel Sherrill * preinstall.am: Regenerated. 2008-09-24 Ralf Corsépius * Makefile.am: Eliminates libcpudir. 2008-09-23 Joel Sherrill * configure.ac: Make letting boot_card() handle work area allocation mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS. 2008-09-22 Joel Sherrill * Makefile.am, console/console.c, include/bsp.h: Use standardized bsp_cleanup() which can optionally print a message, poll for user to press key, and call bsp_reset(). Using this eliminates the various bsp_cleanup() implementations which had their own implementation and variety of string constants. * startup/bspreset.c: New file. * startup/bspclean.c: Removed. 2008-09-22 Joel Sherrill * include/bsp.h, network/network.c: Fix missed name change. 2008-09-22 Thomas Doerfler * startup/bspstart.c: correct DEC click rate for non-U-Boot case 2008-09-22 Sebastian Huber * startup/linkcmds.base: Fixed wrong section size symbols. 2008-09-20 Joel Sherrill * Makefile.am, include/bsp.h, start/start.S, startup/bspstart.c, startup/cpuinit.c: Use top level shared bsp_get_work_area() implementation. Augment it to know about U-Boot. * startup/bspgetworkarea.c: Removed. 2008-09-18 Joel Sherrill * include/bsp.h: Remove unnecessary boilerplate comments. 2008-09-18 Joel Sherrill * include/bsp.h: Eliminate definitions of BSP_LIBIO_MAX_FDS since this is NOT used anywhere. 2008-09-16 Joel Sherrill * startup/bspgetworkarea.c, startup/linkcmds.base: Do some prep work in anticipation of gen5200 and gen83xx being able to shared bsp_get_work_area() implementation. 2008-09-16 Joel Sherrill * Makefile.am, startup/bspstart.c: Add use of bsp_get_work_area() in its own file and rely on BSP Framework to perform more initialization. Remove unnecessary includes of rtems/libio.h and rtems/libcsupport.h. * startup/bspgetworkarea.c: New file. 2008-09-10 Joel Sherrill * include/bsp.h: Review of all bsp_cleanup() implementations. In this phase, all prototypes were removed from bsp.h and empty implementations were removed and made to use the shared stub. 2008-09-06 Ralf Corsépius * console/console.h: Convert to "bool". 2008-09-05 Sebastian Huber * startup/bspstart.c: Derive time base clicks from bus frequency. 2008-09-05 Ralf Corsépius * console/console.c: Convert to "bool". 2008-08-26 Thomas Doerfler * include/hwreg_vals.h: added some settings for HSC_CM01 * network/network.c: changed initialization code for HSC_CM01 * startup/cpuinit.c: changed initialization code for HSC_CM01 * startup/linkcmds.hsc_cm01: adapted memory map to HSC_CM01 2008-08-21 Joel Sherrill * Makefile.am: Added bspclean.c and use shared bsppretaskinghook.c. * console/console.c: Added poll for char helper. * include/bsp.h: Add macro definitions for optional reset behavior. * startup/bspstart.c: Split out bsp_cleanup(). Clean up. * startup/bspclean.c: New file. Not can press any key on normal shutdown to reset board when on MPC8313erdb. 2008-08-21 Sebastian Huber * startup/cpuinit.h: Uses now powerpc-utility.h. Changed invalid usage of a boolean type to a proper integer type in calc_dbat_regvals(). Througout code formatting. 2008-08-20 Sebastian Huber * include/tm27.h: Uses now a decrementer exception handler. Replaces previous file. * startup/bspstart.c: Install a default decrementer exception handler. 2008-08-19 Sebastian Huber * include/bsp.h, network/network.c, spi/spi_init.c, startup/cpuinit.c, startup/uboot_support.c: Fixed warnings. 2008-08-18 Sebastian Huber * Makefile.am, startup/bspstart.c, startup/cpuinit.c: For the MPC8313ERDB -- The BAT entry for the eLBC was missing and add hard reset sequence in bsp_cleanup(). 2008-08-15 Joel Sherrill * README.mpc8313erdb: Some first cut notes on running with U-Boot. 2008-08-14 Joel Sherrill * startup/bspstart.c: Time was running too slow with it taking 10 seconds for RTEMS to advance 5. 2008-08-12 Joel Sherrill * Makefile.am, preinstall.am: Add dummy linkcmds so autoconf tests work on installed BSP. * startup/linkcmds: New file. 2008-08-08 Sebastian Huber * startup/bspstart.c: Fixed calculation of bsp_click_per_usec. 2008-08-01 Sebastian Huber * start/start.S: Clear environment pointer for bootcard. Fixed wrong address increment in mpc83xx_zero_4(). 2008-07-31 Joel Sherrill * Makefile.am: Add stub for U-Boot support. Hopefully someone more knowledgeable than I can provide a real address and length. * startup/uboot_support.c: New file. 2008-07-24 Sebastian Huber * configure.ac, include/bsp.h, startup/bspstart.c, startup/linkcmds.base: Support RAM allocation via bootcard. 2008-07-18 Sebastian Huber * startup/bspstart.c: Enable cache after CPU initialization. Clear only workspace memory area. 2008-07-18 Thomas Doerfler * network/network.c: mpc8249eamds support for Gigabit Ethernet works again 2008-07-18 Thomas Doerfler * network/network.c: mpc8249eamds uses gmii mode 2008-07-17 Ralf Corsépius * configure.ac: Remove RTEMS_AMPOLISH3. 2008-07-14 Sebastian Huber * irq/irq_init.c, irq/irq.h, startup/linkcmds: Removed. * README.mpc8313erdb, include/irq-config.h, include/irq.h, irq/irq.c, startup/linkcmds.base, startup/linkcmds.mpc8313erdb: New files. * Makefile.am, configure.ac, console/config.c, console/console.c, i2c/i2c_init.c, include/bsp.h, include/hwreg_vals.h, network/network.c, spi/spi_init.c, start/start.S, startup/bspstart.c, startup/cpuinit.c, startup/linkcmds.hsc_cm01, startup/linkcmds.mpc8349eamds: Support MPC8313ERDB. 2008-05-15 Joel Sherrill * startup/bspstart.c: Add capability for bootcard.c BSP Initialization Framework to ask the BSP where it has memory for the RTEMS Workspace and C Program Heap. These collectively are referred to as work area. If the BSP supports this, then it does not have to include code to split the available memory between the two areas. This reduces the amount of code in the BSP specific bspstart.c file. Additionally, the shared framework can initialize the C Library, call rtems_debug_enable(), and dirty the work area memory. Until most/all BSPs support this new capability, if the BSP supports this, it should call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac. When the transition is complete, this autoconf macro can be removed. 2008-05-15 Thomas Doerfler * network/network.c, start/start.S: add support for different board 2008-05-15 Thomas Doerfler * irq/ipic.c: make sure, that the masking operations in ICTL and MSR are executed in order 2008-05-15 Thomas Doerfler * include/bsp.h, startup/bspstart.c, * console/console.c, console/config.c: derived module input frequencies from internal bus clock during start time 2008-05-15 Thomas Doerfler * spi/spi_init.c: added base frequency into softc structure, added fm25l256 driver 2008-05-15 Thomas Doerfler * i2c/i2c_init.c: added base frequency into softc structure 2008-05-15 Thomas Doerfler * include/bsp.h, include/hwreg_vals.h, ./Makefile.am: moved HW register settings from bsp.h to hwreg_vals.h 2008-05-14 Joel Sherrill * Makefile.am: Rework to avoid .rel files. 2008-05-12 Joel Sherrill * Makefile.am, startup/bspstart.c: Refactored and renamed initialization routines to rtems_initialize_data_structures, rtems_initialize_before_drivers, rtems_initialize_device_drivers, and rtems_initialize_start_multitasking. This opened the sequence up so that bootcard() could provide a more robust and flexible framework which is easier to explain and understand. This also lays the groundwork for sharing the division of available memory between the RTEMS workspace and heap and the C library initialization across all BSPs. 2008-03-03 Joel Sherrill * startup/linkcmds, startup/linkcmds.hsc_cm01, startup/linkcmds.mpc8349eamds: Add wildcard to gcc_except_table section so programs compiled with gcc 4.3.x can link. 2008-01-22 Joel Sherrill * Makefile.am: Remove duplicate cases of mmu.rel and timer.rel in list of objects. 2007-12-11 Joel Sherrill * include/bsp.h, startup/bspstart.c: Eliminate copies of the Configuration Table. Use the RTEMS provided accessor macros to obtain configuration fields. 2007-12-05 Till Straumann * irq/ipic.c, irq/irq_init.c: Converted exception vector names to new ones (qualified by if non-std ppc exceptions). 2007-12-04 Joel Sherrill * startup/bspstart.c: Move interrupt_stack_size field from CPU Table to Configuration Table. Eliminate CPU Table from all ports. Delete references to CPU Table in all forms. 2007-12-04 Thomas Doerfler * spi/spi_init.c: added missing file 2007-12-03 Joel Sherrill * Makefile.am, startup/bspstart.c: Moved most of the remaining CPU Table fields to the Configuration Table. This included pretasking_hook, predriver_hook, postdriver_hook, idle_task, do_zero_of_workspace, extra_mpci_receive_server_stack, stack_allocate_hook, and stack_free_hook. As a side-effect of this effort some multiprocessing code was made conditional and some style clean up occurred. 2007-11-30 Till Straumann * startup/bspstart: removed _Cpu_table.exceptions_in_RAM. 2007-11-30 Till Straumann * irq/irq.h, irq/irq_init.c: Removed the definition of ASM_IRQ_VECTOR_BASE; this symbol was only use to initialize the irqBase member of the rtems_irq_global_settings struct. However, irqBase is an rtems_irq_symbolic_name, so using BSP_LOWEST_OFFSET is more appropriate. 2007-11-28 Joel Sherrill * startup/bspstart.c: Eliminate PowerPC specific elements from the CPU Table. They have been replaced with variables named bsp_XXX as needed. 2007-10-26 Thomas Doerfler * startup/cpuinit.c: reenable instruction MMU 2007-10-26 Thomas Doerfler * README.mpc8349eamds: added file 2007-10-26 Thomas Doerfler * startup/bspstart.c, startup/linkcmds: removed unneeded address definitions 2007-10-25 Thomas Doerfler * include/bsp.h: fixed some typos 2007-10-25 Thomas Doerfler * Makefile.am, spi/spi_init.c, include/bsp.h: add spi support 2007-09-17 Joel Sherrill * console/console.c, irq/irq_init.c: Eliminate warnings. 2007-09-17 Joel Sherrill * console/console.c: Eliminate DEBUG_puts. 2007-09-12 Joel Sherrill PR 1257/bsps * irq/irq_init.c: Code outside of cpukit should use the public API for rtems_interrupt_disable/rtems_interrupt_enable. By bypassing the public API and directly accessing _CPU_ISR_Disable and _CPU_ISR_Enable, they were bypassing the compiler memory barrier directive which could lead to problems. This patch also changes the type of the variable passed into these routines and addresses minor style issues. 2007-09-11 Joel Sherrill * Makefile.am: Do not include networking drivers if networking is disabled. 2007-09-10 Joel Sherrill * Makefile.am: Do not build networking if it is disabled. 2007-09-05 Joel Sherrill * configure.ac: Fix path. * include/bsp.h: Fix typo. 2007-08-08 Thomas Doerfler * Makefile.am, i2c/i2c_init.c: add i2c initialization 2007-07-13 Joel Sherrill * Makefile.am, preinstall.am: Install a linkcmds all the time. * startup/bspstart.c, startup/cpuinit.c, startup/linkcmds.mpc8349eamds, startup/mpc83xx_regs.c: Add missing CVS Id. * startup/linkcmds: New file. 2007-07-11 Joel Sherrill * include/.cvsignore: New file. 2007-07-11 Joel Sherrill * network/network.c: Removed warning. 2007-07-11 Joel Sherrill * ChangeLog: New file. * aclocal.m4, include/bspopts.h.in: Removed. 2007-07-11 Joel Sherrill * ChangeLog: New file. * aclocal.m4, include/bspopts.h.in: Removed. 2007-07-11 Joel Sherrill * .cvsignore: New file. * Makefile.in: Removed. 2007-07-10 Thomas Doerfler * New BSP -- generic 83xx but tested on mpc8349eamds.