1 | 2007-09-12 Joel Sherrill <joel.sherrill@OARcorp.com> |
---|
2 | |
---|
3 | PR 1257/bsps |
---|
4 | * irq/irq.c: Code outside of cpukit should use the public API for |
---|
5 | rtems_interrupt_disable/rtems_interrupt_enable. By bypassing the |
---|
6 | public API and directly accessing _CPU_ISR_Disable and |
---|
7 | _CPU_ISR_Enable, they were bypassing the compiler memory barrier |
---|
8 | directive which could lead to problems. This patch also changes the |
---|
9 | type of the variable passed into these routines and addresses minor |
---|
10 | style issues. |
---|
11 | |
---|
12 | 2007-09-05 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
13 | |
---|
14 | * irq/irq.h: Reformat -- make things line up. |
---|
15 | |
---|
16 | 2007-08-28 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
17 | |
---|
18 | * console/console.c: Add missing semi-colon. |
---|
19 | |
---|
20 | 2007-08-06 Joel Sherrill <joel.sherrill@OARcorp.com> |
---|
21 | |
---|
22 | * Makefile.am, README.IceCube, preinstall.am, include/bsp.h, |
---|
23 | vectors/vectors.S: Rename EP5200 to IceCube since that is the |
---|
24 | nickname for the Freescale evaluation board it is based upon. BSP was |
---|
25 | tested on a Freescale MPC5200LITE. |
---|
26 | |
---|
27 | 2007-08-02 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
28 | |
---|
29 | * ide/pcmcia_ide.c: Added prototype of mpc5200_pcmciaide_dma_blockop to |
---|
30 | eliminate warning. |
---|
31 | |
---|
32 | 2007-08-02 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
33 | |
---|
34 | * Makefile.am: Add shared ShowBATS(). |
---|
35 | * startup/cpuinit.c: Split out BAT initialization into subroutine |
---|
36 | that is defined based upon conditionals set. More critically |
---|
37 | added code to detect and correct for a buggy U-Boot found on |
---|
38 | some Freescale LITE5200B boards which report Flash memory to |
---|
39 | be for 32MB at 0xFF000000 instead of 0xFE000000. If we use |
---|
40 | the reported information, the system gives an exception just |
---|
41 | after the BAT is programmed. |
---|
42 | * vectors/vectors_init.c: Turn off message unless verbose is on. |
---|
43 | |
---|
44 | 2007-07-18 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
45 | |
---|
46 | * Makefile.am, vectors/vectors_init.c: Print stack trace on exception. |
---|
47 | |
---|
48 | 2007-07-12 Joel Sherrill <joel.sherrill@OARcorp.com> |
---|
49 | |
---|
50 | * startup/linkcmds.brs5l: Add .jcr section. |
---|
51 | |
---|
52 | 2007-07-11 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
53 | |
---|
54 | * README.IceCube: New file. |
---|
55 | |
---|
56 | 2007-07-11 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
57 | |
---|
58 | * console/console.c: Fix typo accidentally introduced. |
---|
59 | * network_5200/network.c: Fix warning. |
---|
60 | |
---|
61 | 2007-07-11 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
62 | |
---|
63 | * startup/linkcmds.ep5200: Add .jcr section. |
---|
64 | |
---|
65 | 2007-07-10 Thomas Doerfler <Thomas.Doerfler@embedded-brains.de> |
---|
66 | |
---|
67 | * bsp_specs, startup/linkcmds, startup/linkcmds.pm520: |
---|
68 | add c++ support again |
---|
69 | * preinstall.am: some fixes |
---|
70 | |
---|
71 | 2007-07-06 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
72 | |
---|
73 | * Makefile.am: Add startup/bspclean.c |
---|
74 | * console/console.c: Remove warning. |
---|
75 | * include/bsp.h: Add conditionals for prompt for reset and resetting |
---|
76 | board. |
---|
77 | * start/start.S: Remove if 1 around section. |
---|
78 | * vectors/vectors_init.c: Do not print unless noisy init enabled. |
---|
79 | * startup/bspclean.c: New file. Will prompt for reset and reset. |
---|
80 | |
---|
81 | 2007-07-06 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
82 | |
---|
83 | * clock/clock.c, console/console.c: Add clock HW initialization missed |
---|
84 | in earlier conversion. |
---|
85 | |
---|
86 | 2007-07-06 Thomas Doerfler <Thomas.Doerfler@embedded-brains.de> |
---|
87 | |
---|
88 | * irq_init.c, Makefile.am: adapted to shared exception code |
---|
89 | |
---|
90 | 2007-06-22 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
91 | |
---|
92 | * clock/clock.c, network_5200/network.c: Convert to using clock driver |
---|
93 | template. |
---|
94 | |
---|
95 | 2007-06-22 Joel Sherrill <joel.sherrill@OARcorp.com> |
---|
96 | |
---|
97 | * startup/linkcmds.brs5l: Add missing wild card on .sdata section so |
---|
98 | all class examples build. |
---|
99 | |
---|
100 | 2007-06-21 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
101 | |
---|
102 | * clock/clock.c: Add nanoseconds since last tick support. |
---|
103 | |
---|
104 | 2007-06-20 Joel Sherrill <joel.sherrill@oarcorp.com> |
---|
105 | |
---|
106 | Add Embedded Planets EP5200 which is the same as the Freescale |
---|
107 | 5200Lite (a.k.a. IceCube) evaluation board. |
---|
108 | * Makefile.am: Add linkcmds.ep5200. |
---|
109 | Add -DMPC5200_BAPI_LIBC_HEADERS to remove some warnings in bestcomm. |
---|
110 | * preinstall.am: Add linkcmds.ep5200. |
---|
111 | * clock/clock.c: Correct math for prescaler/counter when bus speed |
---|
112 | is high enough to require multiple passes of loop. |
---|
113 | * console/console.c: Use same math for initial baud rate as when it |
---|
114 | is changed via ioctl. When HAS_UBOOT is defined, initialize console |
---|
115 | to the same baud as it was with U-Boot. |
---|
116 | * include/bsp.h: Add EP5200 and console boot baud support. |
---|
117 | * include/mpc5200.h: Spacing. |
---|
118 | * startup/bspstart.c: If HAS_UBOOT and SHOW_MORE_INIT_SETTINGS are |
---|
119 | both defined, dump the U-Boot BD info structure. |
---|
120 | * vectors/vectors.S: ep5200 cannot use vectors segment. When loading |
---|
121 | it, U-Boot freezes. Besides, U-Boot can automatically start the BSP |
---|
122 | so we do not have to run from board reset. |
---|
123 | * startup/linkcmds.ep5200: New file. |
---|
124 | |
---|
125 | 2007-04-17 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
126 | |
---|
127 | * mscan/mscan.c: Use size_t for message sizes. Remove absurd type |
---|
128 | cast. |
---|
129 | |
---|
130 | 2007-04-12 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
131 | |
---|
132 | * bsp_specs: Remove qrtems_debug. |
---|
133 | |
---|
134 | 2007-04-06 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
135 | |
---|
136 | * bsp_specs: Remove lib (Now expected to exist in GCC). |
---|
137 | |
---|
138 | 2007-03-12 Joel Sherrill <joel@OARcorp.com> |
---|
139 | |
---|
140 | * clock/clock.c, console/console.c, ide/pcmcia_ide.c, irq/irq.c, |
---|
141 | irq/irq.h, irq/irq_asm.S, irq/irq_init.c, nvram/nvram.c, |
---|
142 | nvram/nvram.h, slicetimer/slicetimer.c, startup/bspstart.c, |
---|
143 | vectors/vectors.h, vectors/vectors_init.c: Correct license URL and/or |
---|
144 | fix mistake in copyright notice. Both of these mistakes appear to be |
---|
145 | from code submitted after these changes were made previously. |
---|
146 | |
---|
147 | 2007-03-11 Joel Sherrill <joel@OARcorp.com> |
---|
148 | |
---|
149 | * startup/bspstart.c: Remove assignments of |
---|
150 | Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default |
---|
151 | value in boot_card.c |
---|
152 | |
---|
153 | 2007-03-10 Joel Sherrill <joel@OARcorp.com> |
---|
154 | |
---|
155 | PR 1227/bsps |
---|
156 | * include/bsp.h: Remove MAX_LONG_TEST_DURATION and |
---|
157 | MAX_SHORT_TEST_DURATION. They are obsolete and unused. |
---|
158 | |
---|
159 | 2007-01-23 Thomas Doerfler <Thomas.Doerfler@embedded-brains.de> |
---|
160 | |
---|
161 | * console/console.c: corrected typo in UART error handler (usage |
---|
162 | * of ISR_PE instead of ISR_OE) |
---|
163 | |
---|
164 | 2006-12-15 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
165 | |
---|
166 | * bestcomm/load_task.c: Remove bogus casts. |
---|
167 | * network_5200/network.c: Use ioctl_command_t as arg to ioctl functions. |
---|
168 | |
---|
169 | 2006-12-02 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
170 | |
---|
171 | * configure.ac: New BUG-REPORT address. |
---|
172 | |
---|
173 | 2006-11-15 Joel Sherrill <joel@OARcorp.com> |
---|
174 | |
---|
175 | * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a |
---|
176 | file and simplified initialization. |
---|
177 | |
---|
178 | 2006-10-17 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
179 | |
---|
180 | * Makefile.am: Remove superfluous -DASM. |
---|
181 | |
---|
182 | 2006-10-17 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
183 | |
---|
184 | * configure.ac: Require autoconf-2.60. Require automake-1.10. |
---|
185 | |
---|
186 | 2006-10-17 Ralf Corsépius <ralf.corsepius@rtems.org> |
---|
187 | |
---|
188 | * clock/clock.c, console/console.c, ide/pcmcia_ide.c, |
---|
189 | ide/pcmcia_ide.h, irq/irq.c, irq/irq.h, irq/irq_asm.S, |
---|
190 | irq/irq_init.c, nvram/m93cxx.h, nvram/nvram.c, nvram/nvram.h, |
---|
191 | slicetimer/slicetimer.c, start/start.S, startup/bspstart.c, |
---|
192 | startup/cpuinit.c, vectors/vectors.S, vectors/vectors_init.c: |
---|
193 | Convert to utf-8. |
---|
194 | |
---|
195 | 2006-09-11 Joel Sherrill <joel@OARcorp.com> |
---|
196 | |
---|
197 | * include/mpc5200.h, network_5200/network.c: Convert C++ style comments |
---|
198 | to C style. |
---|
199 | |
---|
200 | 2006-08-15 Joel Sherrill <joel@OARcorp.com> |
---|
201 | |
---|
202 | * Makefile.am, preinstall.am, startup/linkcmds, startup/linkcmds.brs5l, |
---|
203 | startup/linkcmds.pm520: Add support for missing .rela sections. |
---|
204 | Install linkcmds. |
---|
205 | |
---|
206 | 2006-08-08 Thomas Doerfler <Thomas.Doerfler@embedded-brains.de> |
---|
207 | |
---|
208 | * linkcmds.brs5l: |
---|
209 | (PR1117) Add startup/linkcmds.brs5l |
---|
210 | |
---|
211 | 2006-06-28 Thomas Doerfler <Thomas.Doerfler@embedded-brains.de> |
---|
212 | |
---|
213 | * Makefile.am, preinstall.am: |
---|
214 | (PR1117) Add startup/linkcmds.brs5l, slicetimer.h, nvram.h |
---|
215 | to distributed files, add start/start.S to startup sources |
---|
216 | |
---|
217 | * bestcomm/bestcomm_glue.c: |
---|
218 | (PR1117) make SDMA interrupt operations interrupt save |
---|
219 | |
---|
220 | * bsp_specs: (PR1117) move ecrti to proper location |
---|
221 | |
---|
222 | * console/console.c: (PR1117) round baudrate divider to nearest match |
---|
223 | |
---|
224 | * include/bsp.h: (PR1117) activate interrupt for ATA, |
---|
225 | modify calculation of ROM size, add BSP_Convert_decrementer |
---|
226 | |
---|
227 | * include/mpc5200.h: (PR1117) add some register definitions |
---|
228 | |
---|
229 | * include/tm27.h: |
---|
230 | (PR1117) adapt to make tm27 compile again with this BSP |
---|
231 | |
---|
232 | * mscan/mscan.[ch]: |
---|
233 | (PR1117) many improvements and fixes, |
---|
234 | transmit queue added, |
---|
235 | baud rate settings adapted |
---|
236 | |
---|
237 | * network/network.c: |
---|
238 | (PR1117) add handler code to detect and restart FEC on DMA overflow |
---|
239 | |
---|
240 | * start/start.S: |
---|
241 | (PR1117) fixed some typos and minor bugs |
---|
242 | enable FPU in start sequence |
---|
243 | |
---|
244 | * startup/linkcmds: |
---|
245 | (PR1117) removed, no longer used |
---|
246 | |
---|
247 | * startup/linkcmds.brs5l: |
---|
248 | (PR1117) added |
---|
249 | |
---|
250 | * tod/pcf8563.c: |
---|
251 | (PR1117) fixed bug which read wrong hour from RTC |
---|
252 | |
---|
253 | 2006-03-08 Joel Sherrill <joel@OARcorp.com> |
---|
254 | |
---|
255 | * startup/linkcmds, startup/linkcmds.pm520: Add .gnu.linkonce.b.* |
---|
256 | section. |
---|
257 | |
---|
258 | 2006-02-08 Joel Sherrill <joel@OARcorp.com> |
---|
259 | |
---|
260 | * startup/linkcmds, startup/linkcmds.pm520: Add sections required by |
---|
261 | newer gcc versions. |
---|
262 | |
---|
263 | 2006-01-11 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
264 | |
---|
265 | * configure.ac: Remove explicit ampolish3 support (now in |
---|
266 | RTEMS_BSP_CONFIGURE). |
---|
267 | |
---|
268 | 2006-01-10 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
269 | |
---|
270 | * configure.ac: Add ampolish3 support. |
---|
271 | * Makefile.am: Add preinstall.am. |
---|
272 | |
---|
273 | 2006-01-09 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
274 | |
---|
275 | * Makefile.am: Don't include subdirs.am. |
---|
276 | |
---|
277 | 2006-01-02 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
278 | |
---|
279 | * vectors/asm_utils.S: Remove (Bogus, now in libcpu). |
---|
280 | |
---|
281 | 2006-01-01 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
282 | |
---|
283 | * bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h, clock/clock.c, |
---|
284 | console/console.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c, |
---|
285 | i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h, |
---|
286 | include/bsp.h, include/mpc5200.h, irq/irq.c, irq/irq.h, |
---|
287 | irq/irq_asm.S, irq/irq_init.c, mscan/mscan.c, mscan/mscan.h, |
---|
288 | network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c, |
---|
289 | nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h, |
---|
290 | start/start.S, startup/bspstart.c, startup/cpuinit.c, tod/pcf8563.c, |
---|
291 | tod/pcf8563.h, tod/todcfg.c, vectors/vectors.S, |
---|
292 | vectors/vectors_init.c: Cleanup CVS data. |
---|
293 | |
---|
294 | 2005-12-31 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
295 | |
---|
296 | * irq/irq.c, irq/irq_init.c, vectors/vectors_init.c: |
---|
297 | include <libcpu/raw_exceptions.h>. |
---|
298 | * include/raw_exception.h, vectors/raw_exception.c: Remove. |
---|
299 | Use implementation from libcpu instead. |
---|
300 | |
---|
301 | 2005-12-31 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
302 | |
---|
303 | * bestcomm/bestcomm_glue.c, clock/clock.c, console/console.c, |
---|
304 | i2c/i2c.c, i2c/i2cdrv.c, ide/idecfg.c, ide/pcmcia_ide.c, |
---|
305 | ide/pcmcia_ide.h, include/i2c.h, irq/irq.c, irq/irq_init.c, |
---|
306 | mscan/mscan.c, network_5200/network.c, nvram/nvram.c, nvram/nvram.h, |
---|
307 | slicetimer/slicetimer.c, startup/bspstart.c, startup/cpuinit.c, |
---|
308 | tod/todcfg.c, vectors/vectors_init.c: Misc include file fixes. |
---|
309 | |
---|
310 | 2005-12-31 Ralf Corsepius <ralf.corsepius@rtems.org> |
---|
311 | |
---|
312 | * Makefile.am, README, bsp_specs, configure.ac, |
---|
313 | bestcomm/bestcomm_api.c, bestcomm/bestcomm_api.h, |
---|
314 | bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h, |
---|
315 | bestcomm/bestcomm_priv.h, bestcomm/dma_image.c, |
---|
316 | bestcomm/dma_image.capi.h, bestcomm/dma_image.h, |
---|
317 | bestcomm/dma_image.reloc.c, bestcomm/load_task.c, |
---|
318 | bestcomm/tasksetup_ata.c, bestcomm/tasksetup_bdtable.c, |
---|
319 | bestcomm/tasksetup_crc16_dp_0.c, bestcomm/tasksetup_crc16_dp_1.c, |
---|
320 | bestcomm/tasksetup_fec_rx_bd.c, bestcomm/tasksetup_fec_tx_bd.c, |
---|
321 | bestcomm/tasksetup_gen_dp_0.c, bestcomm/tasksetup_gen_dp_1.c, |
---|
322 | bestcomm/tasksetup_gen_dp_2.c, bestcomm/tasksetup_gen_dp_3.c, |
---|
323 | bestcomm/tasksetup_gen_dp_bd_0.c, bestcomm/tasksetup_gen_dp_bd_1.c, |
---|
324 | bestcomm/tasksetup_gen_rx_bd.c, bestcomm/tasksetup_gen_tx_bd.c, |
---|
325 | bestcomm/tasksetup_lpc.c, bestcomm/tasksetup_pci_rx.c, |
---|
326 | bestcomm/tasksetup_pci_tx.c, bestcomm/include/mgt5200/mgt5200.h, |
---|
327 | bestcomm/include/mgt5200/sdma.h, |
---|
328 | bestcomm/task_api/bestcomm_api_mem.h, |
---|
329 | bestcomm/task_api/bestcomm_cntrl.h, |
---|
330 | bestcomm/task_api/tasksetup_bdtable.h, |
---|
331 | bestcomm/task_api/tasksetup_general.h, clock/clock.c, |
---|
332 | console/console.c, i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c, |
---|
333 | i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h, |
---|
334 | include/bsp.h, include/coverhd.h, include/i2c.h, include/i2cdrv.h, |
---|
335 | include/mpc5200.h, include/raw_exception.h, include/tm27.h, |
---|
336 | include/u-boot.h, irq/irq.c, irq/irq.h, irq/irq_asm.S, |
---|
337 | irq/irq_init.c, mscan/mscan.c, mscan/mscan.h, |
---|
338 | network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c, |
---|
339 | nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h, |
---|
340 | start/start.S, startup/bspstart.c, startup/cpuinit.c, |
---|
341 | startup/linkcmds, startup/linkcmds.pm520, tod/pcf8563.c, |
---|
342 | tod/pcf8563.h, tod/todcfg.c, vectors/asm_utils.S, |
---|
343 | vectors/raw_exception.c, vectors/vectors.S, vectors/vectors.h, |
---|
344 | vectors/vectors_init.c: New (CVS import submission by |
---|
345 | Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>) |
---|
346 | |
---|
347 | 2005-12-09 Thomas Doerfler <Thomas.Doerfler@embedded-brains.de> |
---|
348 | |
---|
349 | * Integrated gen5200 BSP to source tree |
---|