source: rtems/c/src/lib/libbsp/powerpc/gen5200/ChangeLog @ 6f2208f

4.104.114.84.95
Last change on this file since 6f2208f was 6f2208f, checked in by Joel Sherrill <joel.sherrill@…>, on 06/22/07 at 14:34:45

2007-06-22 Joel Sherrill <joel.sherrill@…>

  • startup/linkcmds.brs5l: Add missing wild card on .sdata section so all class examples build.
  • Property mode set to 100644
File size: 9.2 KB
Line 
12007-06-22      Joel Sherrill <joel.sherrill@OARcorp.com>
2
3        * startup/linkcmds.brs5l: Add missing wild card on .sdata section so
4        all class examples build.
5
62007-06-21      Joel Sherrill <joel.sherrill@oarcorp.com>
7
8        * clock/clock.c: Add nanoseconds since last tick support.
9
102007-06-20      Joel Sherrill <joel.sherrill@oarcorp.com>
11
12        Add Embedded Planets EP5200 which is the same as the Freescale
13        5200Lite (a.k.a. IceCube) evaluation board.
14        * Makefile.am: Add linkcmds.ep5200.
15        Add -DMPC5200_BAPI_LIBC_HEADERS to remove some warnings in bestcomm.
16        * preinstall.am: Add linkcmds.ep5200.
17        * clock/clock.c: Correct math for prescaler/counter when bus speed
18        is high enough to require multiple passes of loop.
19        * console/console.c: Use same math for initial baud rate as when it
20        is changed via ioctl.  When HAS_UBOOT is defined, initialize console
21        to the same baud as it was with U-Boot.
22        * include/bsp.h: Add EP5200 and console boot baud support.
23        * include/mpc5200.h: Spacing.
24        * startup/bspstart.c: If HAS_UBOOT and SHOW_MORE_INIT_SETTINGS are
25        both defined, dump the U-Boot BD info structure.
26        * vectors/vectors.S: ep5200 cannot use vectors segment.  When loading
27        it, U-Boot freezes.  Besides, U-Boot can automatically start the BSP
28        so we do not have to run from board reset.
29        * startup/linkcmds.ep5200: New file.
30
312007-04-17      Ralf Corsépius <ralf.corsepius@rtems.org>
32
33        * mscan/mscan.c: Use size_t for message sizes. Remove absurd type
34          cast.
35
362007-04-12      Ralf Corsépius <ralf.corsepius@rtems.org>
37
38        * bsp_specs: Remove qrtems_debug.
39
402007-04-06      Ralf Corsépius <ralf.corsepius@rtems.org>
41
42        * bsp_specs: Remove lib (Now expected to exist in GCC).
43
442007-03-12      Joel Sherrill <joel@OARcorp.com>
45
46        * clock/clock.c, console/console.c, ide/pcmcia_ide.c, irq/irq.c,
47        irq/irq.h, irq/irq_asm.S, irq/irq_init.c, nvram/nvram.c,
48        nvram/nvram.h, slicetimer/slicetimer.c, startup/bspstart.c,
49        vectors/vectors.h, vectors/vectors_init.c: Correct license URL and/or
50        fix mistake in copyright notice. Both of these mistakes appear to be
51        from code submitted after these changes were made previously.
52
532007-03-11      Joel Sherrill <joel@OARcorp.com>
54
55        * startup/bspstart.c: Remove assignments of
56        Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
57        value in boot_card.c
58
592007-03-10      Joel Sherrill <joel@OARcorp.com>
60
61        PR 1227/bsps
62        * include/bsp.h: Remove MAX_LONG_TEST_DURATION and
63        MAX_SHORT_TEST_DURATION. They are obsolete and unused.
64
652007-01-23      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
66
67        * console/console.c: corrected typo in UART error handler (usage
68        * of ISR_PE instead of ISR_OE)
69       
702006-12-15      Ralf Corsépius <ralf.corsepius@rtems.org>
71
72        * bestcomm/load_task.c: Remove bogus casts.
73        * network_5200/network.c: Use ioctl_command_t as arg to ioctl functions.
74
752006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
76
77        * configure.ac: New BUG-REPORT address.
78
792006-11-15      Joel Sherrill <joel@OARcorp.com>
80
81        * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
82        file and simplified initialization.
83
842006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
85
86        * Makefile.am: Remove superfluous -DASM.
87
882006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
89
90        * configure.ac: Require autoconf-2.60. Require automake-1.10.
91
922006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
93
94        * clock/clock.c, console/console.c, ide/pcmcia_ide.c,
95        ide/pcmcia_ide.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
96        irq/irq_init.c, nvram/m93cxx.h, nvram/nvram.c, nvram/nvram.h,
97        slicetimer/slicetimer.c, start/start.S, startup/bspstart.c,
98        startup/cpuinit.c, vectors/vectors.S, vectors/vectors_init.c:
99        Convert to utf-8.
100
1012006-09-11      Joel Sherrill <joel@OARcorp.com>
102
103        * include/mpc5200.h, network_5200/network.c: Convert C++ style comments
104        to C style.
105
1062006-08-15      Joel Sherrill <joel@OARcorp.com>
107
108        * Makefile.am, preinstall.am, startup/linkcmds, startup/linkcmds.brs5l,
109        startup/linkcmds.pm520: Add support for missing .rela sections.
110        Install linkcmds.
111
1122006-08-08      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
113
114        * linkcmds.brs5l:
115        (PR1117) Add  startup/linkcmds.brs5l
116
1172006-06-28      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
118
119        * Makefile.am, preinstall.am:
120        (PR1117) Add  startup/linkcmds.brs5l, slicetimer.h, nvram.h
121        to distributed files, add start/start.S to startup sources
122
123        * bestcomm/bestcomm_glue.c:
124        (PR1117) make SDMA interrupt operations interrupt save
125       
126        * bsp_specs: (PR1117) move ecrti to proper location
127
128        * console/console.c: (PR1117) round baudrate divider to nearest match
129
130        * include/bsp.h: (PR1117) activate interrupt for ATA,
131        modify calculation of ROM size, add BSP_Convert_decrementer
132
133        * include/mpc5200.h: (PR1117) add some register definitions
134
135        * include/tm27.h:
136        (PR1117) adapt to make tm27 compile again with this BSP
137
138        * mscan/mscan.[ch]:
139        (PR1117) many improvements and fixes,
140        transmit queue added,
141        baud rate settings adapted
142
143        * network/network.c:
144        (PR1117) add handler code to detect and restart FEC on DMA overflow
145
146        * start/start.S:
147        (PR1117) fixed some typos and minor bugs
148        enable FPU in start sequence
149
150        * startup/linkcmds:
151        (PR1117) removed, no longer used
152       
153        * startup/linkcmds.brs5l:
154        (PR1117) added
155
156        * tod/pcf8563.c:
157        (PR1117) fixed bug which read wrong hour from RTC
158
1592006-03-08      Joel Sherrill <joel@OARcorp.com>
160
161        * startup/linkcmds, startup/linkcmds.pm520: Add .gnu.linkonce.b.*
162        section.
163
1642006-02-08      Joel Sherrill <joel@OARcorp.com>
165
166        * startup/linkcmds, startup/linkcmds.pm520: Add sections required by
167        newer gcc versions.
168
1692006-01-11      Ralf Corsepius <ralf.corsepius@rtems.org>
170
171        * configure.ac: Remove explicit ampolish3 support (now in
172        RTEMS_BSP_CONFIGURE).
173
1742006-01-10      Ralf Corsepius <ralf.corsepius@rtems.org>
175
176        * configure.ac: Add ampolish3 support.
177        * Makefile.am: Add preinstall.am.
178
1792006-01-09      Ralf Corsepius <ralf.corsepius@rtems.org>
180
181        * Makefile.am: Don't include subdirs.am.
182
1832006-01-02      Ralf Corsepius <ralf.corsepius@rtems.org>
184
185        * vectors/asm_utils.S: Remove (Bogus, now in libcpu).
186
1872006-01-01      Ralf Corsepius <ralf.corsepius@rtems.org>
188
189        * bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h, clock/clock.c,
190        console/console.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
191        i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
192        include/bsp.h, include/mpc5200.h, irq/irq.c, irq/irq.h,
193        irq/irq_asm.S, irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
194        network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
195        nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
196        start/start.S, startup/bspstart.c, startup/cpuinit.c, tod/pcf8563.c,
197        tod/pcf8563.h, tod/todcfg.c, vectors/vectors.S,
198        vectors/vectors_init.c: Cleanup CVS data.
199
2002005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
201
202        * irq/irq.c, irq/irq_init.c, vectors/vectors_init.c:
203        include <libcpu/raw_exceptions.h>.
204        * include/raw_exception.h, vectors/raw_exception.c: Remove.
205        Use implementation from libcpu instead.
206
2072005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
208
209        * bestcomm/bestcomm_glue.c, clock/clock.c, console/console.c,
210        i2c/i2c.c, i2c/i2cdrv.c, ide/idecfg.c, ide/pcmcia_ide.c,
211        ide/pcmcia_ide.h, include/i2c.h, irq/irq.c, irq/irq_init.c,
212        mscan/mscan.c, network_5200/network.c, nvram/nvram.c, nvram/nvram.h,
213        slicetimer/slicetimer.c, startup/bspstart.c, startup/cpuinit.c,
214        tod/todcfg.c, vectors/vectors_init.c: Misc include file fixes.
215
2162005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
217
218        * Makefile.am, README, bsp_specs, configure.ac,
219        bestcomm/bestcomm_api.c, bestcomm/bestcomm_api.h,
220        bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h,
221        bestcomm/bestcomm_priv.h, bestcomm/dma_image.c,
222        bestcomm/dma_image.capi.h, bestcomm/dma_image.h,
223        bestcomm/dma_image.reloc.c, bestcomm/load_task.c,
224        bestcomm/tasksetup_ata.c, bestcomm/tasksetup_bdtable.c,
225        bestcomm/tasksetup_crc16_dp_0.c, bestcomm/tasksetup_crc16_dp_1.c,
226        bestcomm/tasksetup_fec_rx_bd.c, bestcomm/tasksetup_fec_tx_bd.c,
227        bestcomm/tasksetup_gen_dp_0.c, bestcomm/tasksetup_gen_dp_1.c,
228        bestcomm/tasksetup_gen_dp_2.c, bestcomm/tasksetup_gen_dp_3.c,
229        bestcomm/tasksetup_gen_dp_bd_0.c, bestcomm/tasksetup_gen_dp_bd_1.c,
230        bestcomm/tasksetup_gen_rx_bd.c, bestcomm/tasksetup_gen_tx_bd.c,
231        bestcomm/tasksetup_lpc.c, bestcomm/tasksetup_pci_rx.c,
232        bestcomm/tasksetup_pci_tx.c, bestcomm/include/mgt5200/mgt5200.h,
233        bestcomm/include/mgt5200/sdma.h,
234        bestcomm/task_api/bestcomm_api_mem.h,
235        bestcomm/task_api/bestcomm_cntrl.h,
236        bestcomm/task_api/tasksetup_bdtable.h,
237        bestcomm/task_api/tasksetup_general.h, clock/clock.c,
238        console/console.c, i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
239        i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
240        include/bsp.h, include/coverhd.h, include/i2c.h, include/i2cdrv.h,
241        include/mpc5200.h, include/raw_exception.h, include/tm27.h,
242        include/u-boot.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
243        irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
244        network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
245        nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
246        start/start.S, startup/bspstart.c, startup/cpuinit.c,
247        startup/linkcmds, startup/linkcmds.pm520, tod/pcf8563.c,
248        tod/pcf8563.h, tod/todcfg.c, vectors/asm_utils.S,
249        vectors/raw_exception.c, vectors/vectors.S, vectors/vectors.h,
250        vectors/vectors_init.c: New (CVS import submission by
251        Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>)
252
2532005-12-09      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
254
255        * Integrated gen5200 BSP to source tree
Note: See TracBrowser for help on using the repository browser.