source: rtems/c/src/lib/libbsp/powerpc/gen5200/ChangeLog @ 68b9f58

4.104.114.84.95
Last change on this file since 68b9f58 was 68b9f58, checked in by Joel Sherrill <joel.sherrill@…>, on Jul 11, 2007 at 7:51:12 PM

2007-07-11 Joel Sherrill <joel.sherrill@…>

  • Property mode set to 100644
File size: 10.4 KB
Line 
12007-07-11      Joel Sherrill <joel.sherrill@oarcorp.com>
2
3        * README.IceCube: New file.
4
52007-07-11      Joel Sherrill <joel.sherrill@oarcorp.com>
6
7        * console/console.c: Fix typo accidentally introduced.
8        * network_5200/network.c: Fix warning.
9
102007-07-11      Joel Sherrill <joel.sherrill@oarcorp.com>
11
12        * startup/linkcmds.ep5200: Add .jcr section.
13
142007-07-10      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
15
16        * bsp_specs, startup/linkcmds, startup/linkcmds.pm520:
17        add c++ support again
18        * preinstall.am: some fixes
19
202007-07-06      Joel Sherrill <joel.sherrill@oarcorp.com>
21
22        * Makefile.am: Add startup/bspclean.c
23        * console/console.c: Remove warning.
24        * include/bsp.h: Add conditionals for prompt for reset and resetting
25        board.
26        * start/start.S: Remove if 1 around section.
27        * vectors/vectors_init.c: Do not print unless noisy init enabled.
28        * startup/bspclean.c: New file. Will prompt for reset and reset.
29
302007-07-06      Joel Sherrill <joel.sherrill@oarcorp.com>
31
32        * clock/clock.c, console/console.c: Add clock HW initialization missed
33        in earlier conversion.
34
352007-07-06      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
36
37        * irq_init.c, Makefile.am: adapted to shared exception code
38
392007-06-22      Joel Sherrill <joel.sherrill@oarcorp.com>
40
41        * clock/clock.c, network_5200/network.c: Convert to using clock driver
42        template.
43
442007-06-22      Joel Sherrill <joel.sherrill@OARcorp.com>
45
46        * startup/linkcmds.brs5l: Add missing wild card on .sdata section so
47        all class examples build.
48
492007-06-21      Joel Sherrill <joel.sherrill@oarcorp.com>
50
51        * clock/clock.c: Add nanoseconds since last tick support.
52
532007-06-20      Joel Sherrill <joel.sherrill@oarcorp.com>
54
55        Add Embedded Planets EP5200 which is the same as the Freescale
56        5200Lite (a.k.a. IceCube) evaluation board.
57        * Makefile.am: Add linkcmds.ep5200.
58        Add -DMPC5200_BAPI_LIBC_HEADERS to remove some warnings in bestcomm.
59        * preinstall.am: Add linkcmds.ep5200.
60        * clock/clock.c: Correct math for prescaler/counter when bus speed
61        is high enough to require multiple passes of loop.
62        * console/console.c: Use same math for initial baud rate as when it
63        is changed via ioctl.  When HAS_UBOOT is defined, initialize console
64        to the same baud as it was with U-Boot.
65        * include/bsp.h: Add EP5200 and console boot baud support.
66        * include/mpc5200.h: Spacing.
67        * startup/bspstart.c: If HAS_UBOOT and SHOW_MORE_INIT_SETTINGS are
68        both defined, dump the U-Boot BD info structure.
69        * vectors/vectors.S: ep5200 cannot use vectors segment.  When loading
70        it, U-Boot freezes.  Besides, U-Boot can automatically start the BSP
71        so we do not have to run from board reset.
72        * startup/linkcmds.ep5200: New file.
73
742007-04-17      Ralf Corsépius <ralf.corsepius@rtems.org>
75
76        * mscan/mscan.c: Use size_t for message sizes. Remove absurd type
77          cast.
78
792007-04-12      Ralf Corsépius <ralf.corsepius@rtems.org>
80
81        * bsp_specs: Remove qrtems_debug.
82
832007-04-06      Ralf Corsépius <ralf.corsepius@rtems.org>
84
85        * bsp_specs: Remove lib (Now expected to exist in GCC).
86
872007-03-12      Joel Sherrill <joel@OARcorp.com>
88
89        * clock/clock.c, console/console.c, ide/pcmcia_ide.c, irq/irq.c,
90        irq/irq.h, irq/irq_asm.S, irq/irq_init.c, nvram/nvram.c,
91        nvram/nvram.h, slicetimer/slicetimer.c, startup/bspstart.c,
92        vectors/vectors.h, vectors/vectors_init.c: Correct license URL and/or
93        fix mistake in copyright notice. Both of these mistakes appear to be
94        from code submitted after these changes were made previously.
95
962007-03-11      Joel Sherrill <joel@OARcorp.com>
97
98        * startup/bspstart.c: Remove assignments of
99        Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
100        value in boot_card.c
101
1022007-03-10      Joel Sherrill <joel@OARcorp.com>
103
104        PR 1227/bsps
105        * include/bsp.h: Remove MAX_LONG_TEST_DURATION and
106        MAX_SHORT_TEST_DURATION. They are obsolete and unused.
107
1082007-01-23      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
109
110        * console/console.c: corrected typo in UART error handler (usage
111        * of ISR_PE instead of ISR_OE)
112       
1132006-12-15      Ralf Corsépius <ralf.corsepius@rtems.org>
114
115        * bestcomm/load_task.c: Remove bogus casts.
116        * network_5200/network.c: Use ioctl_command_t as arg to ioctl functions.
117
1182006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
119
120        * configure.ac: New BUG-REPORT address.
121
1222006-11-15      Joel Sherrill <joel@OARcorp.com>
123
124        * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
125        file and simplified initialization.
126
1272006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
128
129        * Makefile.am: Remove superfluous -DASM.
130
1312006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
132
133        * configure.ac: Require autoconf-2.60. Require automake-1.10.
134
1352006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
136
137        * clock/clock.c, console/console.c, ide/pcmcia_ide.c,
138        ide/pcmcia_ide.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
139        irq/irq_init.c, nvram/m93cxx.h, nvram/nvram.c, nvram/nvram.h,
140        slicetimer/slicetimer.c, start/start.S, startup/bspstart.c,
141        startup/cpuinit.c, vectors/vectors.S, vectors/vectors_init.c:
142        Convert to utf-8.
143
1442006-09-11      Joel Sherrill <joel@OARcorp.com>
145
146        * include/mpc5200.h, network_5200/network.c: Convert C++ style comments
147        to C style.
148
1492006-08-15      Joel Sherrill <joel@OARcorp.com>
150
151        * Makefile.am, preinstall.am, startup/linkcmds, startup/linkcmds.brs5l,
152        startup/linkcmds.pm520: Add support for missing .rela sections.
153        Install linkcmds.
154
1552006-08-08      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
156
157        * linkcmds.brs5l:
158        (PR1117) Add  startup/linkcmds.brs5l
159
1602006-06-28      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
161
162        * Makefile.am, preinstall.am:
163        (PR1117) Add  startup/linkcmds.brs5l, slicetimer.h, nvram.h
164        to distributed files, add start/start.S to startup sources
165
166        * bestcomm/bestcomm_glue.c:
167        (PR1117) make SDMA interrupt operations interrupt save
168       
169        * bsp_specs: (PR1117) move ecrti to proper location
170
171        * console/console.c: (PR1117) round baudrate divider to nearest match
172
173        * include/bsp.h: (PR1117) activate interrupt for ATA,
174        modify calculation of ROM size, add BSP_Convert_decrementer
175
176        * include/mpc5200.h: (PR1117) add some register definitions
177
178        * include/tm27.h:
179        (PR1117) adapt to make tm27 compile again with this BSP
180
181        * mscan/mscan.[ch]:
182        (PR1117) many improvements and fixes,
183        transmit queue added,
184        baud rate settings adapted
185
186        * network/network.c:
187        (PR1117) add handler code to detect and restart FEC on DMA overflow
188
189        * start/start.S:
190        (PR1117) fixed some typos and minor bugs
191        enable FPU in start sequence
192
193        * startup/linkcmds:
194        (PR1117) removed, no longer used
195       
196        * startup/linkcmds.brs5l:
197        (PR1117) added
198
199        * tod/pcf8563.c:
200        (PR1117) fixed bug which read wrong hour from RTC
201
2022006-03-08      Joel Sherrill <joel@OARcorp.com>
203
204        * startup/linkcmds, startup/linkcmds.pm520: Add .gnu.linkonce.b.*
205        section.
206
2072006-02-08      Joel Sherrill <joel@OARcorp.com>
208
209        * startup/linkcmds, startup/linkcmds.pm520: Add sections required by
210        newer gcc versions.
211
2122006-01-11      Ralf Corsepius <ralf.corsepius@rtems.org>
213
214        * configure.ac: Remove explicit ampolish3 support (now in
215        RTEMS_BSP_CONFIGURE).
216
2172006-01-10      Ralf Corsepius <ralf.corsepius@rtems.org>
218
219        * configure.ac: Add ampolish3 support.
220        * Makefile.am: Add preinstall.am.
221
2222006-01-09      Ralf Corsepius <ralf.corsepius@rtems.org>
223
224        * Makefile.am: Don't include subdirs.am.
225
2262006-01-02      Ralf Corsepius <ralf.corsepius@rtems.org>
227
228        * vectors/asm_utils.S: Remove (Bogus, now in libcpu).
229
2302006-01-01      Ralf Corsepius <ralf.corsepius@rtems.org>
231
232        * bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h, clock/clock.c,
233        console/console.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
234        i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
235        include/bsp.h, include/mpc5200.h, irq/irq.c, irq/irq.h,
236        irq/irq_asm.S, irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
237        network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
238        nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
239        start/start.S, startup/bspstart.c, startup/cpuinit.c, tod/pcf8563.c,
240        tod/pcf8563.h, tod/todcfg.c, vectors/vectors.S,
241        vectors/vectors_init.c: Cleanup CVS data.
242
2432005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
244
245        * irq/irq.c, irq/irq_init.c, vectors/vectors_init.c:
246        include <libcpu/raw_exceptions.h>.
247        * include/raw_exception.h, vectors/raw_exception.c: Remove.
248        Use implementation from libcpu instead.
249
2502005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
251
252        * bestcomm/bestcomm_glue.c, clock/clock.c, console/console.c,
253        i2c/i2c.c, i2c/i2cdrv.c, ide/idecfg.c, ide/pcmcia_ide.c,
254        ide/pcmcia_ide.h, include/i2c.h, irq/irq.c, irq/irq_init.c,
255        mscan/mscan.c, network_5200/network.c, nvram/nvram.c, nvram/nvram.h,
256        slicetimer/slicetimer.c, startup/bspstart.c, startup/cpuinit.c,
257        tod/todcfg.c, vectors/vectors_init.c: Misc include file fixes.
258
2592005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
260
261        * Makefile.am, README, bsp_specs, configure.ac,
262        bestcomm/bestcomm_api.c, bestcomm/bestcomm_api.h,
263        bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h,
264        bestcomm/bestcomm_priv.h, bestcomm/dma_image.c,
265        bestcomm/dma_image.capi.h, bestcomm/dma_image.h,
266        bestcomm/dma_image.reloc.c, bestcomm/load_task.c,
267        bestcomm/tasksetup_ata.c, bestcomm/tasksetup_bdtable.c,
268        bestcomm/tasksetup_crc16_dp_0.c, bestcomm/tasksetup_crc16_dp_1.c,
269        bestcomm/tasksetup_fec_rx_bd.c, bestcomm/tasksetup_fec_tx_bd.c,
270        bestcomm/tasksetup_gen_dp_0.c, bestcomm/tasksetup_gen_dp_1.c,
271        bestcomm/tasksetup_gen_dp_2.c, bestcomm/tasksetup_gen_dp_3.c,
272        bestcomm/tasksetup_gen_dp_bd_0.c, bestcomm/tasksetup_gen_dp_bd_1.c,
273        bestcomm/tasksetup_gen_rx_bd.c, bestcomm/tasksetup_gen_tx_bd.c,
274        bestcomm/tasksetup_lpc.c, bestcomm/tasksetup_pci_rx.c,
275        bestcomm/tasksetup_pci_tx.c, bestcomm/include/mgt5200/mgt5200.h,
276        bestcomm/include/mgt5200/sdma.h,
277        bestcomm/task_api/bestcomm_api_mem.h,
278        bestcomm/task_api/bestcomm_cntrl.h,
279        bestcomm/task_api/tasksetup_bdtable.h,
280        bestcomm/task_api/tasksetup_general.h, clock/clock.c,
281        console/console.c, i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
282        i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
283        include/bsp.h, include/coverhd.h, include/i2c.h, include/i2cdrv.h,
284        include/mpc5200.h, include/raw_exception.h, include/tm27.h,
285        include/u-boot.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
286        irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
287        network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
288        nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
289        start/start.S, startup/bspstart.c, startup/cpuinit.c,
290        startup/linkcmds, startup/linkcmds.pm520, tod/pcf8563.c,
291        tod/pcf8563.h, tod/todcfg.c, vectors/asm_utils.S,
292        vectors/raw_exception.c, vectors/vectors.S, vectors/vectors.h,
293        vectors/vectors_init.c: New (CVS import submission by
294        Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>)
295
2962005-12-09      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
297
298        * Integrated gen5200 BSP to source tree
Note: See TracBrowser for help on using the repository browser.