source: rtems/c/src/lib/libbsp/powerpc/gen5200/ChangeLog @ 4a260f0

4.104.114.95
Last change on this file since 4a260f0 was 4a260f0, checked in by Thomas Doerfler <Thomas.Doerfler@…>, on Sep 8, 2008 at 9:51:46 AM

corrected parameters in i2c driver for done signalling
updated mscan CAN driver

  • Property mode set to 100644
File size: 21.2 KB
Line 
12008-09-08      Sebastian Huber <sebastian.huber@embedded-brains.de>
2
3        * include/mscan-base.h: Added bit timing macros.
4
52008-09-08      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
6
7        * i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c, i2c/mpc5200mbus.h,
8        include/i2c.h:
9        converted done_arg to a void pointer
10       
112008-09-06      Ralf Corsépius <ralf.corsepius@rtems.org>
12
13        * bestcomm/bestcomm_glue.c, ide/pcmcia_ide.c, tod/todcfg.c:
14        Convert to "bool".
15
162008-09-05      Ralf Corsépius <ralf.corsepius@rtems.org>
17
18        * i2c/i2c.c, i2c/i2cdrv.c: Convert to "bool".
19
202008-09-04      Sebastian Huber <sebastian.huber@embedded-brains.de>
21
22        * include/mscan-base.h, mscan/mscan-base.c, mscan/mscan.c,
23        mscan/mscan_int.h: Improved parameter checks for bit rate function.
24
252008-09-03      Joel Sherrill <joel.sherrill@oarcorp.com>
26
27        * Makefile.am, bestcomm/load_task.c,
28        bestcomm/task_api/tasksetup_general.h: Eliminate requirement to build
29        bestcomm as a relocatable lump. This should reduce the minimum
30        footprint considerably.
31
322008-09-03      Sebastian Huber <sebastian.huber@embedded-brains.de>
33
34        * irq/irq.h, irq/irq_asm.h, irq/irq_init.c, vectors/vectors.S,
35        vectors/vectors.h, vectors/vectors_init.c: Removed files.
36
37        * include/irq-config.h, include/irq.h, include/mscan-base.h,
38        mscan/mscan-base.c, startup/linkcmds.base: New files.
39
40        * mscan/mscan.c, mscan/mscan_int.h: Moved general MSCAN functions into
41        separate header and source files (include/mscan-base.h and
42        mscan/mscan-base.c).  Formatted code.
43
44        * bestcomm/bestcomm_glue.c, bestcomm/load_task.c, clock/clock.c,
45        console/console.c, i2c/mpc5200mbus.c, ide/idecfg.c, ide/pcmcia_ide.c,
46        include/bsp.h, irq/irq.c, network_5200/network.c,
47        slicetimer/slicetimer.c, start/start.S, startup/bspclean.c,
48        startup/bspstart.c, startup/cpuinit.c: Converted to use shared
49        exception and interrupt code.
50
51        * startup/linkcmds, startup/linkcmds.brs5l, startup/linkcmds.icecube,
52        startup/linkcmds.pm520: Changed to include new file
53        startup/linkcmds.base.  Supports small data area now.
54
55        * configure.ac, Makefile.am, bsp_specs, preinstall.am: Update.
56
572008-08-25      Sebastian Huber <sebastian.huber@embedded-brains.de>
58
59        * startup/cpuinit.h: Uses now powerpc-utility.h.  Changed invalid usage
60        of a boolean type to a proper integer type in calc_dbat_regvals().
61
622008-08-20      Ralf Corsépius <ralf.corsepius@rtems.org>
63
64        * clock/clock.c, irq/irq_init.c, vectors/vectors.h,
65        vectors/vectors_init.c: Add missing prototypes.
66
672008-08-01      Sebastian Huber <sebastian.huber@embedded-brains.de>
68
69        * start/start.S: Clear environment pointer for bootcard.
70
712008-07-29      Chris Johns <chrisj@rtems.org>
72
73        * ide/pcmcia_ide.c: Updated to the libblock changes.
74
752008-07-01      Joel Sherrill <joel.sherrill@oarcorp.com>
76
77        * Makefile.am, include/bsp.h: Add bsp_uboot_getenv() to obtain U-Boot
78        environment variables.
79        * startup/uboot_support.c: New file.
80
812008-06-10      Joel Sherrill <joel.sherrill@oarcorp.com>
82
83        * irq/irq.c: Add units.
84
852008-06-06      Joel Sherrill <joel.sherrill@oarcorp.com>
86
87        * include/bsp.h, irq/irq.c, irq/irq_init.c, startup/bspclean.c,
88        startup/bspstart.c: Slightly better names for IRQ benchmarking. Make
89        sure the routines are present all the time.
90
912008-05-22      Joel Sherrill <joel.sherrill@oarcorp.com>
92
93        * console/console.c: Remove explicit switch and call
94        termios_baud_to_number().
95
962008-05-22      Joel Sherrill <joel.sherrill@oarcorp.com>
97
98        * console/console.c: Properly inform termios of our initial baud rate.
99        If it is not the default, this causes problems when an application
100        changes any termios attributes since termios thinks our baud rate is
101        one thing when in fact, it is another.
102
1032008-05-15      Joel Sherrill <joel.sherrill@OARcorp.com>
104
105        * startup/bspstart.c: Add capability for bootcard.c BSP Initialization
106        Framework to ask the BSP where it has memory for the RTEMS Workspace
107        and C Program Heap. These collectively are referred to as work area.
108        If the BSP supports this, then it does not have to include code to
109        split the available memory between the two areas. This reduces the
110        amount of code in the BSP specific bspstart.c file. Additionally, the
111        shared framework can initialize the C Library, call
112        rtems_debug_enable(), and dirty the work area memory. Until most/all
113        BSPs support this new capability, if the BSP supports this, it should
114        call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
115        When the transition is complete, this autoconf macro can be removed.
116
1172008-05-14      Joel Sherrill <joel.sherrill@OARcorp.com>
118
119        * Makefile.am: Rework to avoid .rel files.
120
1212008-05-12      Joel Sherrill <joel.sherrill@OARcorp.com>
122
123        * startup/bspstart.c: Refactored and renamed initialization routines to
124        rtems_initialize_data_structures, rtems_initialize_before_drivers,
125        rtems_initialize_device_drivers, and
126        rtems_initialize_start_multitasking. This opened the sequence up so
127        that bootcard() could provide a more robust and flexible framework
128        which is easier to explain and understand. This also lays the
129        groundwork for sharing the division of available memory between the
130        RTEMS workspace and heap and the C library initialization across all
131        BSPs.
132
1332008-03-03      Joel Sherrill <joel.sherrill@OARcorp.com>
134
135        * startup/linkcmds, startup/linkcmds.brs5l, startup/linkcmds.icecube,
136        startup/linkcmds.pm520: Add wildcard to gcc_except_table section so
137        programs compiled with gcc 4.3.x can link.
138
1392008-01-11      Joel Sherrill <joel.sherrill@oarcorp.com>
140
141        * configure.ac, irq/irq.c, startup/bspclean.c, startup/bspstart.c: Add
142        ALLOW_IRQ_NESTING option. The MPC5200 has a settle time after
143        acknowledging the IRQs and currently the BSP does not account for
144        that. After acknowledging an interrupt, it currently gets a second
145        spurious IRQ a significant percentage of the time. Rename to
146        BENCHMARK_IRQ_PROCESSING and get it working again. Under one test
147        load, not nesting interrupts resulted in a 50% reduction in the
148        number of IRQs and an ~30% reduction in time spent in IRQs.
149
1502007-12-18      Joel Sherrill <joel.sherrill@OARcorp.com>
151
152        * startup/linkcmds: Spacing.
153        * startup/linkcmds.brs5l: Add wildcard to .bss section.
154
1552007-12-14      Joel Sherrill <joel.sherrill@oarcorp.com>
156
157        * irq/irq.c, startup/bspclean.c, startup/bspstart.c: I give. The code
158        is now in conditionally so I can avoid putting it in accidently
159        again.
160
161        * startup/bspclean.c: Revert patch with test code.
162
1632007-12-11      Joel Sherrill <joel.sherrill@OARcorp.com>
164
165        * irq/irq.c: Revert accidentally committed test code.
166
1672007-12-11      Joel Sherrill <joel.sherrill@OARcorp.com>
168
169        * bsp_specs, clock/clock.c, include/bsp.h, irq/irq.c,
170        startup/bspclean.c, startup/bspstart.c: Eliminate copies of the
171        Configuration Table. Use the RTEMS provided accessor macros to obtain
172        configuration fields.
173
1742007-12-06      Joel Sherrill <joel.sherrill@oarcorp.com>
175
176        * include/mpc5200.h: Expand tabs.
177
1782007-12-05      Joel Sherrill <joel.sherrill@oarcorp.com>
179
180        * include/bsp.h: Correct BSP specific Idle thread support.
181
1822007-12-05      Till Straumann <strauman@slac.stanford.edu>
183
184        * irq/irq_init.c, irq_asm.S:
185        Converted exception vector names to new ones
186        (qualified by <cpu_type> if non-std ppc exceptions).
187
1882007-12-04      Joel Sherrill <joel.sherrill@OARcorp.com>
189
190        * startup/bspstart.c: Move interrupt_stack_size field from CPU Table to
191        Configuration Table. Eliminate CPU Table from all ports. Delete
192        references to CPU Table in all forms.
193
1942007-12-04      Joel Sherrill <joel.sherrill@oarcorp.com>
195
196        * clock/clock.c: Fix typo.
197
1982007-12-03      Joel Sherrill <joel.sherrill@oarcorp.com>
199
200        * irq/irq.c: Spacing.
201
2022007-12-03      Joel Sherrill <joel.sherrill@OARcorp.com>
203
204        * startup/bspstart.c: Moved most of the remaining CPU Table fields to
205        the Configuration Table. This included pretasking_hook,
206        predriver_hook, postdriver_hook, idle_task, do_zero_of_workspace,
207        extra_mpci_receive_server_stack, stack_allocate_hook, and
208        stack_free_hook. As a side-effect of this effort some multiprocessing
209        code was made conditional and some style clean up occurred.
210
2112007-11-30      Till Straumann <strauman@slac.stanford.edu>
212
213        * startup/bspstart: removed _Cpu_table.exceptions_in_RAM.
214
2152007-11-30      Till Straumann <strauman@slac.stanford.edu>
216
217        * irq/irq.h, irq/irq_init.c: Removed the definition
218        of ASM_IRQ_VECTOR_BASE; this symbol was only use to
219        initialize the irqBase member of the rtems_irq_global_settings
220        struct. However, irqBase is an rtems_irq_symbolic_name,
221        so using BSP_LOWEST_OFFSET is more appropriate.
222
2232007-11-28      Joel Sherrill <joel.sherrill@OARcorp.com>
224
225        * clock/clock.c, startup/bspstart.c: Eliminate PowerPC specific
226        elements from the CPU Table. They have been replaced with variables
227        named bsp_XXX as needed.
228
2292007-10-31      Joel Sherrill <joel.sherrill@oarcorp.com>
230
231        * include/mpc5200.h: Fix typo.
232
2332007-10-30      Joel Sherrill <joel.sherrill@oarcorp.com>
234
235        * include/mpc5200.h: Fix constants off by one nibble.
236
2372007-10-30      Joel Sherrill <joel.sherrill@oarcorp.com>
238
239        * include/mpc5200.h: Added some simple interrupt GPIO constants.
240
2412007-10-26      Joel Sherrill <joel.sherrill@oarcorp.com>
242
243        * irq/irq.h: Fixed typos.
244
2452007-09-21      Joel Sherrill <joel.sherrill@OARcorp.com>
246
247        * network_5200/network.c: Add multicast support.
248
2492007-09-12      Joel Sherrill <joel.sherrill@OARcorp.com>
250
251        PR 1257/bsps
252        * irq/irq.c: Code outside of cpukit should use the public API for
253        rtems_interrupt_disable/rtems_interrupt_enable. By bypassing the
254        public API and directly accessing _CPU_ISR_Disable and
255        _CPU_ISR_Enable, they were bypassing the compiler memory barrier
256        directive which could lead to problems. This patch also changes the
257        type of the variable passed into these routines and addresses minor
258        style issues.
259
2602007-09-05      Joel Sherrill <joel.sherrill@oarcorp.com>
261
262        * irq/irq.h: Reformat -- make things line up.
263
2642007-08-28      Joel Sherrill <joel.sherrill@oarcorp.com>
265
266        * console/console.c: Add missing semi-colon.
267
2682007-08-06      Joel Sherrill <joel.sherrill@OARcorp.com>
269
270        * Makefile.am, README.IceCube, preinstall.am, include/bsp.h,
271        vectors/vectors.S: Rename EP5200 to IceCube since that is the
272        nickname for the Freescale evaluation board it is based upon. BSP was
273        tested on a Freescale MPC5200LITE.
274
2752007-08-02      Joel Sherrill <joel.sherrill@oarcorp.com>
276
277        * ide/pcmcia_ide.c: Added prototype of mpc5200_pcmciaide_dma_blockop to
278        eliminate warning.
279
2802007-08-02      Joel Sherrill <joel.sherrill@oarcorp.com>
281
282        * Makefile.am: Add shared ShowBATS().
283        * startup/cpuinit.c: Split out BAT initialization into subroutine
284        that is defined based upon conditionals set.  More critically
285        added code to detect and correct for a buggy U-Boot found on
286        some Freescale LITE5200B boards which report Flash memory to
287        be for 32MB at 0xFF000000 instead of 0xFE000000.  If we use
288        the reported information, the system gives an exception just
289        after the BAT is programmed.
290        * vectors/vectors_init.c: Turn off message unless verbose is on.
291
2922007-07-18      Joel Sherrill <joel.sherrill@oarcorp.com>
293
294        * Makefile.am, vectors/vectors_init.c: Print stack trace on exception.
295
2962007-07-12      Joel Sherrill <joel.sherrill@OARcorp.com>
297
298        * startup/linkcmds.brs5l: Add .jcr section.
299
3002007-07-11      Joel Sherrill <joel.sherrill@oarcorp.com>
301
302        * README.IceCube: New file.
303
3042007-07-11      Joel Sherrill <joel.sherrill@oarcorp.com>
305
306        * console/console.c: Fix typo accidentally introduced.
307        * network_5200/network.c: Fix warning.
308
3092007-07-11      Joel Sherrill <joel.sherrill@oarcorp.com>
310
311        * startup/linkcmds.ep5200: Add .jcr section.
312
3132007-07-10      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
314
315        * bsp_specs, startup/linkcmds, startup/linkcmds.pm520:
316        add c++ support again
317        * preinstall.am: some fixes
318
3192007-07-06      Joel Sherrill <joel.sherrill@oarcorp.com>
320
321        * Makefile.am: Add startup/bspclean.c
322        * console/console.c: Remove warning.
323        * include/bsp.h: Add conditionals for prompt for reset and resetting
324        board.
325        * start/start.S: Remove if 1 around section.
326        * vectors/vectors_init.c: Do not print unless noisy init enabled.
327        * startup/bspclean.c: New file. Will prompt for reset and reset.
328
3292007-07-06      Joel Sherrill <joel.sherrill@oarcorp.com>
330
331        * clock/clock.c, console/console.c: Add clock HW initialization missed
332        in earlier conversion.
333
3342007-07-06      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
335
336        * irq_init.c, Makefile.am: adapted to shared exception code
337
3382007-06-22      Joel Sherrill <joel.sherrill@oarcorp.com>
339
340        * clock/clock.c, network_5200/network.c: Convert to using clock driver
341        template.
342
3432007-06-22      Joel Sherrill <joel.sherrill@OARcorp.com>
344
345        * startup/linkcmds.brs5l: Add missing wild card on .sdata section so
346        all class examples build.
347
3482007-06-21      Joel Sherrill <joel.sherrill@oarcorp.com>
349
350        * clock/clock.c: Add nanoseconds since last tick support.
351
3522007-06-20      Joel Sherrill <joel.sherrill@oarcorp.com>
353
354        Add Embedded Planets EP5200 which is the same as the Freescale
355        5200Lite (a.k.a. IceCube) evaluation board.
356        * Makefile.am: Add linkcmds.ep5200.
357        Add -DMPC5200_BAPI_LIBC_HEADERS to remove some warnings in bestcomm.
358        * preinstall.am: Add linkcmds.ep5200.
359        * clock/clock.c: Correct math for prescaler/counter when bus speed
360        is high enough to require multiple passes of loop.
361        * console/console.c: Use same math for initial baud rate as when it
362        is changed via ioctl.  When HAS_UBOOT is defined, initialize console
363        to the same baud as it was with U-Boot.
364        * include/bsp.h: Add EP5200 and console boot baud support.
365        * include/mpc5200.h: Spacing.
366        * startup/bspstart.c: If HAS_UBOOT and SHOW_MORE_INIT_SETTINGS are
367        both defined, dump the U-Boot BD info structure.
368        * vectors/vectors.S: ep5200 cannot use vectors segment.  When loading
369        it, U-Boot freezes.  Besides, U-Boot can automatically start the BSP
370        so we do not have to run from board reset.
371        * startup/linkcmds.ep5200: New file.
372
3732007-04-17      Ralf Corsépius <ralf.corsepius@rtems.org>
374
375        * mscan/mscan.c: Use size_t for message sizes. Remove absurd type
376          cast.
377
3782007-04-12      Ralf Corsépius <ralf.corsepius@rtems.org>
379
380        * bsp_specs: Remove qrtems_debug.
381
3822007-04-06      Ralf Corsépius <ralf.corsepius@rtems.org>
383
384        * bsp_specs: Remove lib (Now expected to exist in GCC).
385
3862007-03-12      Joel Sherrill <joel@OARcorp.com>
387
388        * clock/clock.c, console/console.c, ide/pcmcia_ide.c, irq/irq.c,
389        irq/irq.h, irq/irq_asm.S, irq/irq_init.c, nvram/nvram.c,
390        nvram/nvram.h, slicetimer/slicetimer.c, startup/bspstart.c,
391        vectors/vectors.h, vectors/vectors_init.c: Correct license URL and/or
392        fix mistake in copyright notice. Both of these mistakes appear to be
393        from code submitted after these changes were made previously.
394
3952007-03-11      Joel Sherrill <joel@OARcorp.com>
396
397        * startup/bspstart.c: Remove assignments of
398        Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
399        value in boot_card.c
400
4012007-03-10      Joel Sherrill <joel@OARcorp.com>
402
403        PR 1227/bsps
404        * include/bsp.h: Remove MAX_LONG_TEST_DURATION and
405        MAX_SHORT_TEST_DURATION. They are obsolete and unused.
406
4072007-01-23      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
408
409        * console/console.c: corrected typo in UART error handler (usage
410        * of ISR_PE instead of ISR_OE)
411       
4122006-12-15      Ralf Corsépius <ralf.corsepius@rtems.org>
413
414        * bestcomm/load_task.c: Remove bogus casts.
415        * network_5200/network.c: Use ioctl_command_t as arg to ioctl functions.
416
4172006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
418
419        * configure.ac: New BUG-REPORT address.
420
4212006-11-15      Joel Sherrill <joel@OARcorp.com>
422
423        * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
424        file and simplified initialization.
425
4262006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
427
428        * Makefile.am: Remove superfluous -DASM.
429
4302006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
431
432        * configure.ac: Require autoconf-2.60. Require automake-1.10.
433
4342006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
435
436        * clock/clock.c, console/console.c, ide/pcmcia_ide.c,
437        ide/pcmcia_ide.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
438        irq/irq_init.c, nvram/m93cxx.h, nvram/nvram.c, nvram/nvram.h,
439        slicetimer/slicetimer.c, start/start.S, startup/bspstart.c,
440        startup/cpuinit.c, vectors/vectors.S, vectors/vectors_init.c:
441        Convert to utf-8.
442
4432006-09-11      Joel Sherrill <joel@OARcorp.com>
444
445        * include/mpc5200.h, network_5200/network.c: Convert C++ style comments
446        to C style.
447
4482006-08-15      Joel Sherrill <joel@OARcorp.com>
449
450        * Makefile.am, preinstall.am, startup/linkcmds, startup/linkcmds.brs5l,
451        startup/linkcmds.pm520: Add support for missing .rela sections.
452        Install linkcmds.
453
4542006-08-08      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
455
456        * linkcmds.brs5l:
457        (PR1117) Add  startup/linkcmds.brs5l
458
4592006-06-28      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
460
461        * Makefile.am, preinstall.am:
462        (PR1117) Add  startup/linkcmds.brs5l, slicetimer.h, nvram.h
463        to distributed files, add start/start.S to startup sources
464
465        * bestcomm/bestcomm_glue.c:
466        (PR1117) make SDMA interrupt operations interrupt save
467       
468        * bsp_specs: (PR1117) move ecrti to proper location
469
470        * console/console.c: (PR1117) round baudrate divider to nearest match
471
472        * include/bsp.h: (PR1117) activate interrupt for ATA,
473        modify calculation of ROM size, add BSP_Convert_decrementer
474
475        * include/mpc5200.h: (PR1117) add some register definitions
476
477        * include/tm27.h:
478        (PR1117) adapt to make tm27 compile again with this BSP
479
480        * mscan/mscan.[ch]:
481        (PR1117) many improvements and fixes,
482        transmit queue added,
483        baud rate settings adapted
484
485        * network/network.c:
486        (PR1117) add handler code to detect and restart FEC on DMA overflow
487
488        * start/start.S:
489        (PR1117) fixed some typos and minor bugs
490        enable FPU in start sequence
491
492        * startup/linkcmds:
493        (PR1117) removed, no longer used
494       
495        * startup/linkcmds.brs5l:
496        (PR1117) added
497
498        * tod/pcf8563.c:
499        (PR1117) fixed bug which read wrong hour from RTC
500
5012006-03-08      Joel Sherrill <joel@OARcorp.com>
502
503        * startup/linkcmds, startup/linkcmds.pm520: Add .gnu.linkonce.b.*
504        section.
505
5062006-02-08      Joel Sherrill <joel@OARcorp.com>
507
508        * startup/linkcmds, startup/linkcmds.pm520: Add sections required by
509        newer gcc versions.
510
5112006-01-11      Ralf Corsepius <ralf.corsepius@rtems.org>
512
513        * configure.ac: Remove explicit ampolish3 support (now in
514        RTEMS_BSP_CONFIGURE).
515
5162006-01-10      Ralf Corsepius <ralf.corsepius@rtems.org>
517
518        * configure.ac: Add ampolish3 support.
519        * Makefile.am: Add preinstall.am.
520
5212006-01-09      Ralf Corsepius <ralf.corsepius@rtems.org>
522
523        * Makefile.am: Don't include subdirs.am.
524
5252006-01-02      Ralf Corsepius <ralf.corsepius@rtems.org>
526
527        * vectors/asm_utils.S: Remove (Bogus, now in libcpu).
528
5292006-01-01      Ralf Corsepius <ralf.corsepius@rtems.org>
530
531        * bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h, clock/clock.c,
532        console/console.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
533        i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
534        include/bsp.h, include/mpc5200.h, irq/irq.c, irq/irq.h,
535        irq/irq_asm.S, irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
536        network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
537        nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
538        start/start.S, startup/bspstart.c, startup/cpuinit.c, tod/pcf8563.c,
539        tod/pcf8563.h, tod/todcfg.c, vectors/vectors.S,
540        vectors/vectors_init.c: Cleanup CVS data.
541
5422005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
543
544        * irq/irq.c, irq/irq_init.c, vectors/vectors_init.c:
545        include <libcpu/raw_exceptions.h>.
546        * include/raw_exception.h, vectors/raw_exception.c: Remove.
547        Use implementation from libcpu instead.
548
5492005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
550
551        * bestcomm/bestcomm_glue.c, clock/clock.c, console/console.c,
552        i2c/i2c.c, i2c/i2cdrv.c, ide/idecfg.c, ide/pcmcia_ide.c,
553        ide/pcmcia_ide.h, include/i2c.h, irq/irq.c, irq/irq_init.c,
554        mscan/mscan.c, network_5200/network.c, nvram/nvram.c, nvram/nvram.h,
555        slicetimer/slicetimer.c, startup/bspstart.c, startup/cpuinit.c,
556        tod/todcfg.c, vectors/vectors_init.c: Misc include file fixes.
557
5582005-12-31      Ralf Corsepius <ralf.corsepius@rtems.org>
559
560        * Makefile.am, README, bsp_specs, configure.ac,
561        bestcomm/bestcomm_api.c, bestcomm/bestcomm_api.h,
562        bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h,
563        bestcomm/bestcomm_priv.h, bestcomm/dma_image.c,
564        bestcomm/dma_image.capi.h, bestcomm/dma_image.h,
565        bestcomm/dma_image.reloc.c, bestcomm/load_task.c,
566        bestcomm/tasksetup_ata.c, bestcomm/tasksetup_bdtable.c,
567        bestcomm/tasksetup_crc16_dp_0.c, bestcomm/tasksetup_crc16_dp_1.c,
568        bestcomm/tasksetup_fec_rx_bd.c, bestcomm/tasksetup_fec_tx_bd.c,
569        bestcomm/tasksetup_gen_dp_0.c, bestcomm/tasksetup_gen_dp_1.c,
570        bestcomm/tasksetup_gen_dp_2.c, bestcomm/tasksetup_gen_dp_3.c,
571        bestcomm/tasksetup_gen_dp_bd_0.c, bestcomm/tasksetup_gen_dp_bd_1.c,
572        bestcomm/tasksetup_gen_rx_bd.c, bestcomm/tasksetup_gen_tx_bd.c,
573        bestcomm/tasksetup_lpc.c, bestcomm/tasksetup_pci_rx.c,
574        bestcomm/tasksetup_pci_tx.c, bestcomm/include/mgt5200/mgt5200.h,
575        bestcomm/include/mgt5200/sdma.h,
576        bestcomm/task_api/bestcomm_api_mem.h,
577        bestcomm/task_api/bestcomm_cntrl.h,
578        bestcomm/task_api/tasksetup_bdtable.h,
579        bestcomm/task_api/tasksetup_general.h, clock/clock.c,
580        console/console.c, i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
581        i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
582        include/bsp.h, include/coverhd.h, include/i2c.h, include/i2cdrv.h,
583        include/mpc5200.h, include/raw_exception.h, include/tm27.h,
584        include/u-boot.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
585        irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
586        network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
587        nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
588        start/start.S, startup/bspstart.c, startup/cpuinit.c,
589        startup/linkcmds, startup/linkcmds.pm520, tod/pcf8563.c,
590        tod/pcf8563.h, tod/todcfg.c, vectors/asm_utils.S,
591        vectors/raw_exception.c, vectors/vectors.S, vectors/vectors.h,
592        vectors/vectors_init.c: New (CVS import submission by
593        Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>)
594
5952005-12-09      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>
596
597        * Integrated gen5200 BSP to source tree
Note: See TracBrowser for help on using the repository browser.