source: rtems/c/src/lib/libbsp/powerpc/eth_comm/include/bsp.h @ 196094eb

4.104.114.84.95
Last change on this file since 196094eb was ee733965, checked in by Joel Sherrill <joel.sherrill@…>, on Feb 17, 1999 at 8:24:53 PM

Jay Monkman <jmonkman@…> submitted the eth_comm BSP for a PPC860
based board.

  • Property mode set to 100644
File size: 2.5 KB
Line 
1/*  bsp.h
2 *
3 *  This include file contains all board IO definitions.
4 *
5 *  XXX : put yours in here
6 *
7 *  COPYRIGHT (c) 1989-1998.
8 *  On-Line Applications Research Corporation (OAR).
9 *  Copyright assigned to U.S. Government, 1994.
10 *
11 *  The license and distribution terms for this file may be
12 *  found in the file LICENSE in this distribution or at
13 *  http://www.OARcorp.com/rtems/license.html.
14 *
15 *  $Id$
16 */
17
18#ifndef __NO_BSP_h
19#define __NO_BSP_h
20
21#ifdef __cplusplus
22extern "C" {
23#endif
24
25#include <rtems.h>
26#include <console.h>
27#include <clockdrv.h>
28
29/*
30 * Network driver configuration
31 */
32struct rtems_bsdnet_ifconfig;
33extern int rtems_enet_driver_attach (struct rtems_bsdnet_ifconfig *config);
34#define RTEMS_BSP_NETWORK_DRIVER_NAME   "eth1"
35#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_enet_driver_attach
36
37/*
38 * We need to decide how much memory will be non-cacheable. This
39 * will mainly be memory that will be used in DMA (network and serial
40 * buffers).
41 */
42#define NOCACHE_MEM_SIZE 512*1024
43
44/*
45 *  Define the time limits for RTEMS Test Suite test durations.
46 *  Long test and short test duration limits are provided.  These
47 *  values are in seconds and need to be converted to ticks for the
48 *  application.
49 *
50 */
51
52#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
53#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
54
55/*
56 *  Stuff for Time Test 27
57 */
58
59#define MUST_WAIT_FOR_INTERRUPT 0
60
61#define Install_tm27_vector( handler ) set_vector( (handler), PPC_IRQ_SCALL, 1 )
62
63#define Cause_tm27_intr() asm volatile ("sc")
64
65#define Clear_tm27_intr()
66
67#define Lower_tm27_intr()
68
69/* Constants */
70
71#define RAM_START 0
72#define RAM_END   0x100000
73
74/* miscellaneous stuff assumed to exist */
75
76extern rtems_configuration_table BSP_Configuration;
77
78/*
79 *  Device Driver Table Entries
80 */
81
82/*
83 * NOTE: Use the standard Console driver entry
84 */
85 
86/*
87 * NOTE: Use the standard Clock driver entry
88 */
89
90/*
91 * How many libio files we want
92 */
93
94#define BSP_LIBIO_MAX_FDS       20
95
96/* functions */
97
98void bsp_cleanup( void );
99
100void M860ExecuteRISC( rtems_unsigned16 command );
101void *M860AllocateBufferDescriptors( int count );
102void *M860AllocateRiscTimers( int count );
103extern char M860DefaultWatchdogFeeder;
104
105rtems_isr_entry set_vector(                    /* returns old vector */
106  rtems_isr_entry     handler,                  /* isr routine        */
107  rtems_vector_number vector,                   /* vector number      */
108  int                 type                      /* RTEMS or RAW intr  */
109);
110
111#ifdef __cplusplus
112}
113#endif
114
115#endif
116/* end of include file */
Note: See TracBrowser for help on using the repository browser.