source: rtems/c/src/lib/libbsp/powerpc/ep1a/irq/irq.c @ a9e62c2

/*
 *
 *  This file contains the implementation of the function described in irq.h
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.rtems.com/license/LICENSE.
 *
 *  $Id$
 */
  
#include <rtems/system.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <bsp/VME.h>
#include <bsp/openpic.h>
#include <rtems/score/thread.h>
#include <rtems/score/apiext.h>
#include <libcpu/raw_exception.h>
#include <libcpu/io.h>
#include <bsp/vectors.h>
#include <stdlib.h>
#include <rtems/bspIo.h> /* for printk */
#define RAVEN_INTR_ACK_REG 0xfeff0030

/*
 * pointer to the mask representing the additionnal irq vectors
 * that must be disabled when a particular entry is activated.
 * They will be dynamically computed from teh prioruty table given
 * in BSP_rtems_irq_mngt_set();
 * CAUTION : this table is accessed directly by interrupt routine
 *           prologue.
 */
rtems_i8259_masks       irq_mask_or_tbl[BSP_IRQ_NUMBER];
/*
 * default handler connected on each irq after bsp initialization
 */
static rtems_irq_connect_data   default_rtems_entry;

/*
 * location used to store initial tables used for interrupt
 * management.
 */
static rtems_irq_global_settings*       internal_config;
static rtems_irq_connect_data*          rtems_hdl_tbl;

/*
 * Check if IRQ is an ISA IRQ
 */
static inline int is_isa_irq(const rtems_irq_number irqLine)
{
  return (((int) irqLine <= BSP_ISA_IRQ_MAX_OFFSET) &
          ((int) irqLine >= BSP_ISA_IRQ_LOWEST_OFFSET)
         );
}

/*
 * Check if IRQ is an OPENPIC IRQ
 */
static inline int is_pci_irq(const rtems_irq_number irqLine)
{
  return (((int) irqLine <= BSP_PCI_IRQ_MAX_OFFSET) &
          ((int) irqLine >= BSP_PCI_IRQ_LOWEST_OFFSET)
         );
}

/*
 * Check if IRQ is a Porcessor IRQ
 */
static inline int is_processor_irq(const rtems_irq_number irqLine)
{
  return (((int) irqLine <= BSP_PROCESSOR_IRQ_MAX_OFFSET) &
          ((int) irqLine >= BSP_PROCESSOR_IRQ_LOWEST_OFFSET)
         );
}


/*
 * ------------------------ RTEMS Irq helper functions ----------------
 */
 
/*
 * This function check that the value given for the irq line
 * is valid.
 */

static int isValidInterrupt(int irq)
{
  if ( (irq < BSP_LOWEST_OFFSET) || (irq > BSP_MAX_OFFSET))
    return 0;
  return 1;
}


/*
 * ------------------------ RTEMS Shared Irq Handler Mngt Routines ----------------
 */
int BSP_install_rtems_shared_irq_handler  (const rtems_irq_connect_data* irq)
{
    rtems_interrupt_level   level;
    rtems_irq_connect_data* vchain;

    if (!isValidInterrupt(irq->name)) {
      printk("Invalid interrupt vector %d\n",irq->name);
      return 0;
    }
    printk("Install Shared interrupt %d\n", irq->name);

    rtems_interrupt_disable(level);

    if ( (int)rtems_hdl_tbl[irq->name].next_handler  == -1 ) {
      rtems_interrupt_enable(level);
      printk("IRQ vector %d already connected to an unshared handler\n",irq->name);
      return 0;
    }

     vchain = (rtems_irq_connect_data*)malloc(sizeof(rtems_irq_connect_data));

    /* save off topmost handler */
    vchain[0]= rtems_hdl_tbl[irq->name];
    
    /*
     * store the data provided by user
     */
    rtems_hdl_tbl[irq->name] = *irq;

    /* link chain to new topmost handler */
    rtems_hdl_tbl[irq->name].next_handler = (void *)vchain;

    
    if (is_isa_irq(irq->name)) {
      /*
       * Enable interrupt at PIC level
       */
      BSP_irq_enable_at_i8259s (irq->name);
    }
    
    if (is_pci_irq(irq->name)) {
      /*
       * Enable interrupt at OPENPIC level
       */
      printk(" openpic_enable_irq %d\n", (int)irq->name );
      openpic_enable_irq ((int) irq->name );  /* - BSP_PCI_IRQ_LOWEST_OFFSET); */
    }

    if (is_processor_irq(irq->name)) {
      /*
       * Enable exception at processor level
       */
    }
    /*
     * Enable interrupt on device
     */
        if (irq->on)
        irq->on(irq);
    
    rtems_interrupt_enable(level);

    return 1;
}


/*
 * ------------------------ RTEMS Single Irq Handler Mngt Routines ----------------
 */

int BSP_install_rtems_irq_handler  (const rtems_irq_connect_data* irq)
{
    rtems_interrupt_level       level;

    if (!isValidInterrupt(irq->name)) {
      printk("Invalid interrupt vector %d\n",irq->name);
      return 0;
    }
    /*
     * Check if default handler is actually connected. If not issue an error.
     * You must first get the current handler via i386_get_current_idt_entry
     * and then disconnect it using i386_delete_idt_entry.
     * RATIONALE : to always have the same transition by forcing the user
     * to get the previous handler before accepting to disconnect.
     */
    rtems_interrupt_disable(level);
    if (rtems_hdl_tbl[irq->name].hdl != default_rtems_entry.hdl) {
      rtems_interrupt_enable(level);
      printk("IRQ vector %d already connected\n",irq->name);
      return 0;
    }

    /*
     * store the data provided by user
     */
    rtems_hdl_tbl[irq->name] = *irq;
    rtems_hdl_tbl[irq->name].next_handler = (void *)-1;
    
    if (is_isa_irq(irq->name)) {
      /*
       * Enable interrupt at PIC level
       */
      BSP_irq_enable_at_i8259s (irq->name);
    }
    
    if (is_pci_irq(irq->name)) {
      /*
       * Enable interrupt at OPENPIC level
       */
      openpic_enable_irq ((int) irq->name ); /* - BSP_PCI_IRQ_LOWEST_OFFSET); */
    }

    if (is_processor_irq(irq->name)) {
      /*
       * Enable exception at processor level
       */
    }
    /*
     * Enable interrupt on device
     */
        if (irq->on)
        irq->on(irq);
    
    rtems_interrupt_enable(level);

    return 1;
}


int BSP_get_current_rtems_irq_handler   (rtems_irq_connect_data* irq)
{
    rtems_interrupt_level       level;

    if (!isValidInterrupt(irq->name)) {
      return 0;
    }
    rtems_interrupt_disable(level);
      *irq = rtems_hdl_tbl[irq->name];
    rtems_interrupt_enable(level);
    return 1;
}

int BSP_remove_rtems_irq_handler  (const rtems_irq_connect_data* irq)
{
    rtems_irq_connect_data *pchain= NULL, *vchain = NULL;
    rtems_interrupt_level   level;
  
    if (!isValidInterrupt(irq->name)) {
      return 0;
    }
    /*
     * Check if default handler is actually connected. If not issue an error.
     * You must first get the current handler via i386_get_current_idt_entry
     * and then disconnect it using i386_delete_idt_entry.
     * RATIONALE : to always have the same transition by forcing the user
     * to get the previous handler before accepting to disconnect.
     */
    rtems_interrupt_disable(level);
    if (rtems_hdl_tbl[irq->name].hdl != irq->hdl) {
      rtems_interrupt_enable(level);
      return 0;
    }

    if( (int)rtems_hdl_tbl[irq->name].next_handler != -1 )
    {
       int found = 0;

       for( (pchain= NULL, vchain = &rtems_hdl_tbl[irq->name]);
            (vchain->hdl != default_rtems_entry.hdl);
            (pchain= vchain, vchain = (rtems_irq_connect_data*)vchain->next_handler) )
       {
          if( vchain->hdl == irq->hdl )
          {
             found= -1; break;
          }
       }

       if( !found )
       {
          rtems_interrupt_enable(level);
          return 0;
       }
    }
    else
    {
       if (rtems_hdl_tbl[irq->name].hdl != irq->hdl) 
       {
          rtems_interrupt_enable(level);
         return 0;
       }
    }

    if (is_isa_irq(irq->name)) {
      /*
       * disable interrupt at PIC level
       */
      BSP_irq_disable_at_i8259s (irq->name);
    }
    if (is_pci_irq(irq->name)) {
      /*
       * disable interrupt at OPENPIC level
       */
      openpic_disable_irq ((int) irq->name );  
    }
    if (is_processor_irq(irq->name)) {
      /*
       * disable exception at processor level
       */
    }    

    /*
     * Disable interrupt on device
     */
        if (irq->off)
        irq->off(irq);

    /*
     * restore the default irq value
     */
    if( !vchain )
    {
       /* single handler vector... */
       rtems_hdl_tbl[irq->name] = default_rtems_entry;
    }
    else
    {
       if( pchain )
       {
          /* non-first handler being removed */
          pchain->next_handler = vchain->next_handler;
       }
       else
       {
          /* first handler isn't malloc'ed, so just overwrite it.  Since
          the contents of vchain are being struct copied, vchain itself
          goes away */
          rtems_hdl_tbl[irq->name]= *vchain;
       }
       free(vchain);
    }

    rtems_interrupt_enable(level);

    return 1;
}

/*
 * ------------------------ RTEMS Global Irq Handler Mngt Routines ----------------
 */

int BSP_rtems_irq_mngt_set(rtems_irq_global_settings* config)
{
    int                    i;
    rtems_interrupt_level  level;

    /*
     * Store various code accelerators
     */
    internal_config             = config;
    default_rtems_entry         = config->defaultEntry;
    rtems_hdl_tbl               = config->irqHdlTbl;
    return 1;  

    rtems_interrupt_disable(level);
    /*
     * set up internal tables used by rtems interrupt prologue
     */
    for (i=BSP_PCI_IRQ_LOWEST_OFFSET; i < BSP_PCI_IRQ_LOWEST_OFFSET + BSP_PCI_IRQ_NUMBER ; i++) {
      /*
       * Note that openpic_set_priority() sets the TASK priority of the PIC
       */
      openpic_set_source_priority(i, internal_config->irqPrioTbl[i]);
      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
         openpic_enable_irq ((int) i); 
         {
            rtems_irq_connect_data* vchain;
            for( vchain = &rtems_hdl_tbl[i];
                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl); 
                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
            {
                          if(vchain->on)
               vchain->on(vchain);
            }
         }

      }
      else {
         /* if (rtems_hdl_tbl[i].off) rtems_hdl_tbl[i].off(&rtems_hdl_tbl[i]); */
         {
            rtems_irq_connect_data* vchain;
            for( vchain = &rtems_hdl_tbl[i];
                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl); 
                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
            {
                          if (vchain->off)
               vchain->off(vchain);
            }
         }
         
         openpic_disable_irq ((int) i ); 
      }
    }
    /*
     * Must enable PCI/ISA bridge IRQ
     */
    openpic_enable_irq (0);
    /*
     * finish with Processor exceptions handled like IRQ
     */
    for (i=BSP_PROCESSOR_IRQ_LOWEST_OFFSET; i < BSP_PROCESSOR_IRQ_LOWEST_OFFSET + BSP_PROCESSOR_IRQ_NUMBER; i++) {
      if (rtems_hdl_tbl[i].hdl != default_rtems_entry.hdl) {
         /* if (rtems_hdl_tbl[i].on) rtems_hdl_tbl[i].on(&rtems_hdl_tbl[i]); */
         {
            rtems_irq_connect_data* vchain;
            for( vchain = &rtems_hdl_tbl[i];
                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl); 
                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
            {
                          if (vchain->on)
               vchain->on(vchain);
            }
         }

      }
      else {
         /* if (rtems_hdl_tbl[i].off) rtems_hdl_tbl[i].off(&rtems_hdl_tbl[i]); */
         {
            rtems_irq_connect_data* vchain;
            for( vchain = &rtems_hdl_tbl[i];
                 ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl); 
                 vchain = (rtems_irq_connect_data*)vchain->next_handler )
            {
                          if (vchain->off)
               vchain->off(vchain);
            }
         }

      }
    }
    rtems_interrupt_enable(level);
    return 1;
}

int BSP_rtems_irq_mngt_get(rtems_irq_global_settings** config)
{
    *config = internal_config;
    return 0;
}    

int _BSP_vme_bridge_irq = -1;
 
unsigned BSP_spuriousIntr = 0;
/*
 * High level IRQ handler called from shared_raw_irq_code_entry
 */
int C_dispatch_irq_handler (struct _BSP_Exception_frame *frame, unsigned int excNum)
{
  register unsigned int irq;
  register unsigned isaIntr;                  /* boolean */
  register unsigned oldMask = 0;              /* old isa pic masks */
  register unsigned newMask;                  /* new isa pic masks */
  register unsigned msr;
  register unsigned new_msr;

  if (excNum == ASM_DEC_VECTOR) {
    _CPU_MSR_GET(msr);
    new_msr = msr | MSR_EE;
    _CPU_MSR_SET(new_msr);
    
    rtems_hdl_tbl[BSP_DECREMENTER].hdl( rtems_hdl_tbl[BSP_DECREMENTER].handle );

    _CPU_MSR_SET(msr);
    return 0;
    
  }

  irq = openpic_irq(0);

  if (irq == OPENPIC_VEC_SPURIOUS) {
    ++BSP_spuriousIntr;
   return 0;
  }

  isaIntr = (irq == BSP_PCI_ISA_BRIDGE_IRQ);
  if (isaIntr)  {
    /*
     * Acknowledge and read 8259 vector
     */
    irq = (unsigned int) (*(unsigned char *) RAVEN_INTR_ACK_REG);
    /*
     * store current PIC mask
     */
    oldMask = i8259s_cache;
    newMask = oldMask | irq_mask_or_tbl [irq];
    i8259s_cache = newMask;
    outport_byte(PIC_MASTER_IMR_IO_PORT, i8259s_cache & 0xff);
    outport_byte(PIC_SLAVE_IMR_IO_PORT, ((i8259s_cache & 0xff00) >> 8));
    BSP_irq_ack_at_i8259s (irq);
    openpic_eoi(0);
  }

  _CPU_MSR_GET(msr);
  new_msr = msr | MSR_EE;
  _CPU_MSR_SET(new_msr);

  {
     rtems_irq_connect_data* vchain;
     irq -= 16;    /* Correct the vector for the 8240 */  
     for( vchain = &rtems_hdl_tbl[irq];
          ((int)vchain != -1 && vchain->hdl != default_rtems_entry.hdl);
          vchain = (rtems_irq_connect_data*)vchain->next_handler )
     {
        vchain->hdl( vchain->handle );
     }
  }
  _CPU_MSR_SET(msr);

  if (isaIntr)  {
    i8259s_cache = oldMask;
    outport_byte(PIC_MASTER_IMR_IO_PORT, i8259s_cache & 0xff);
    outport_byte(PIC_SLAVE_IMR_IO_PORT, ((i8259s_cache & 0xff00) >> 8));
  }
  else {
#ifdef BSP_PCI_VME_DRIVER_DOES_EOI
        /* leave it to the VME bridge driver to do EOI, so
     * it can re-enable the openpic while handling
     * VME interrupts (-> VME priorities in software)
         */
        if (_BSP_vme_bridge_irq != irq)
#endif
                openpic_eoi(0);
  }
  return 0;
}
    
    
  
void _ThreadProcessSignalsFromIrq (BSP_Exception_frame* ctx)
{
  /*
   * Process pending signals that have not already been
   * processed by _Thread_Displatch. This happens quite
   * unfrequently : the ISR must have posted an action
   * to the current running thread.
   */
  if ( _Thread_Do_post_task_switch_extension ||
       _Thread_Executing->do_post_task_switch_extension ) {
    _Thread_Executing->do_post_task_switch_extension = FALSE;
    _API_extensions_Run_postswitch();
  }
  /*
   * I plan to process other thread related events here.
   * This will include DEBUG session requested from keyboard...
   */
}