source: rtems/c/src/lib/libbsp/powerpc/ep1a/configure.ac @ 95aa5e1

4.104.11
Last change on this file since 95aa5e1 was 95aa5e1, checked in by Joel Sherrill <joel.sherrill@…>, on Sep 23, 2008 at 7:53:35 PM

2008-09-23 Joel Sherrill <joel.sherrill@…>

  • configure.ac: Make letting boot_card() handle work area allocation mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
  • Property mode set to 100644
File size: 1.4 KB
Line 
1## Process this file with autoconf to produce a configure script.
2##
3## $Id$
4
5AC_PREREQ(2.60)
6AC_INIT([rtems-c-src-lib-libbsp-powerpc-ep1a],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
7AC_CONFIG_SRCDIR([bsp_specs])
8RTEMS_TOP(../../../../../..)
9
10RTEMS_CANONICAL_TARGET_CPU
11AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
12RTEMS_BSP_CONFIGURE
13
14RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
15RTEMS_CANONICALIZE_TOOLS
16RTEMS_PROG_CCAS
17
18RTEMS_BSPOPTS_SET([PPC_USE_DATA_CACHE],[*],[0])
19RTEMS_BSPOPTS_HELP([PPC_USE_DATA_CACHE],
20[If defined, then the PowerPC specific code in RTEMS will use
21 data cache instructions to optimize the context switch code.
22 This code can conflict with debuggers or emulators.  It is known
23 to break the Corelis PowerPC emulator with at least some combinations
24 of PowerPC 603e revisions and emulator versions.
25 The BSP actually contains the call that enables this.])
26
27RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[0])
28RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
29[If defined, the instruction cache will be enabled after address translation
30 is turned on.])
31
32RTEMS_BSPOPTS_SET([CONSOLE_USE_INTERRUPTS],[*],[0])
33RTEMS_BSPOPTS_HELP([CONSOLE_USE_INTERRUPTS],
34[whether using console interrupts])
35
36RTEMS_CHECK_NETWORKING
37AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
38
39BSP_BOOTCARD_OPTIONS
40
41# Explicitly list all Makefiles here
42AC_CONFIG_FILES([Makefile])
43
44RTEMS_PPC_EXCEPTIONS
45
46AC_OUTPUT
Note: See TracBrowser for help on using the repository browser.