source: rtems/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/mpisr.c @ 48bfd992

4.104.114.84.95
Last change on this file since 48bfd992 was 48bfd992, checked in by Joel Sherrill <joel.sherrill@…>, on Nov 30, 1999 at 7:58:02 PM

Renamed shm.h to shm_driver.h to avoid conflicts with POSIX shm.h.

Renamed file shmsupp/intr.c in some BSPs to shmsupp/cause_intr.c to
avoid conflict with rtems/src/intr.c (Classic API Interrupt Manager).

  • Property mode set to 100644
File size: 1.1 KB
Line 
1/*  Shm_isr_nobsp()
2 *
3 *  COPYRIGHT (c) 1989-1999.
4 *  On-Line Applications Research Corporation (OAR).
5 *
6 *  The license and distribution terms for this file may be
7 *  found in the file LICENSE in this distribution or at
8 *  http://www.OARcorp.com/rtems/license.html.
9 *
10 *  $Id$
11 */
12
13#include <rtems.h>
14#include <bsp.h>
15#include <shm_driver.h>
16
17rtems_isr Shm_isr_nobsp( void )
18{
19  /*
20   *  If this routine has to do anything other than the mpisr.c
21   *  found in the generic driver, then copy the contents of the generic
22   *  mpisr.c and augment it to satisfy this particular board.  Typically,
23   *  you need to have a board specific mpisr.c when the interrupt
24   *  must be cleared.
25   *
26   *  If the generic mpisr.c satisifies your requirements, then
27   *  remove this routine from your target's shmsupp/mpisb.c file.
28   *  Then simply install the generic Shm_isr in the Shm_setvec
29   *  routine below.
30   */
31}
32
33/*  Shm_setvec
34 *
35 *  This driver routine sets the SHM interrupt vector to point to the
36 *  driver's SHM interrupt service routine.
37 *
38 *  Input parameters:  NONE
39 *
40 *  Output parameters: NONE
41 */
42
43void Shm_setvec( void )
44{
45  /* XXX: FIX ME!!! */
46}
Note: See TracBrowser for help on using the repository browser.