source: rtems/c/src/lib/libbsp/no_cpu/no_bsp/shmsupp/getcfg.c @ b547e84

Last change on this file since b547e84 was b547e84, checked in by Joel Sherrill <joel.sherrill@…>, on Sep 4, 2003 at 6:44:56 PM

2003-09-04 Joel Sherrill <joel@…>

  • clock/ckinit.c, console/console.c, include/bsp.h, shmsupp/addrconv.c, shmsupp/getcfg.c, shmsupp/lock.c, shmsupp/mpisr.c, startup/bspclean.c, startup/bspstart.c, startup/linkcmds, startup/main.c, startup/setvec.c, timer/timer.c, timer/timerisr.c: URL for license changed.
  • Property mode set to 100644
File size: 2.0 KB
Line 
1/*  void Shm_Get_configuration( localnode, &shmcfg )
2 *
3 *  This routine initializes, if necessary, and returns a pointer
4 *  to the Shared Memory Configuration Table for the XXX target.
5 *
6 *  INPUT PARAMETERS:
7 *    localnode - local node number
8 *    shmcfg    - address of pointer to SHM Config Table
9 *
10 *  OUTPUT PARAMETERS:
11 *    *shmcfg   - pointer to SHM Config Table
12 *
13XXX: FIX THE COMMENTS BELOW WHEN THE CPU IS KNOWN
14 *  NOTES:  The XYZ does not have an interprocessor interrupt.
15 *
16 *          The following table illustrates the configuration limitations:
17 *
18 *                                   BUS     MAX
19 *                          MODE    ENDIAN  NODES
20 *                        ========= ====== =======
21 *                         POLLED    BIG    2+
22 *                        INTERRUPT **** NOT SUPPORTED ****
23 *
24 *  COPYRIGHT (c) 1989-1999.
25 *  On-Line Applications Research Corporation (OAR).
26 *
27 *  The license and distribution terms for this file may be
28 *  found in the file LICENSE in this distribution or at
29 *  http://www.rtems.com/license/LICENSE.
30 *
31 *  $Id$
32 */
33
34#include <rtems.h>
35#include <bsp.h>
36#include <shm_driver.h>
37
38/*
39 *  configured if currently polling of interrupt driven
40 */
41
42#define INTERRUPT 0        /* XXX: */
43#define POLLING   1        /* XXX: fix me -- is polling ONLY!!! */
44
45
46shm_config_table BSP_shm_cfgtbl;
47
48void Shm_Get_configuration(
49  rtems_unsigned32   localnode,
50  shm_config_table **shmcfg
51)
52{
53   BSP_shm_cfgtbl.base         = 0x0;
54   BSP_shm_cfgtbl.length       = 1 * MEGABYTE;
55   BSP_shm_cfgtbl.format       = SHM_BIG;
56
57   /*
58    *  Override cause_intr or shm_isr if your target has
59    *  special requirements.
60    */
61
62   BSP_shm_cfgtbl.cause_intr   = Shm_Cause_interrupt;
63
64#ifdef NEUTRAL_BIG
65   BSP_shm_cfgtbl.convert      = NULL_CONVERT;
66#else
67   BSP_shm_cfgtbl.convert      = CPU_swap_u32;
68#endif
69
70   BSP_shm_cfgtbl.poll_intr    = POLLED_MODE;
71   BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT;
72   BSP_shm_cfgtbl.Intr.value   = NO_INTERRUPT;
73   BSP_shm_cfgtbl.Intr.length  = NO_INTERRUPT;
74
75   *shmcfg = &BSP_shm_cfgtbl;
76}
Note: See TracBrowser for help on using the repository browser.