source: rtems/c/src/lib/libbsp/no_cpu/no_bsp/include/bsp.h @ dcf0c5b8

4.104.114.84.95
Last change on this file since dcf0c5b8 was 690a6d2, checked in by Joel Sherrill <joel.sherrill@…>, on 09/04/03 at 18:52:16

2003-09-04 Joel Sherrill <joel@…>

  • clock/ckinit.c, console/console.c, include/bsp.h, shmsupp/addrconv.c, shmsupp/getcfg.c, shmsupp/lock.c, shmsupp/mpisr.c, startup/bspclean.c, startup/bspstart.c, startup/linkcmds, startup/main.c, startup/setvec.c, timer/timer.c, timer/timerisr.c: URL for license changed.
  • Property mode set to 100644
File size: 2.2 KB
Line 
1/*  bsp.h
2 *
3 *  This include file contains all board IO definitions.
4 *
5 *  XXX : put yours in here
6 *
7 *  COPYRIGHT (c) 1989-1999.
8 *  On-Line Applications Research Corporation (OAR).
9 *
10 *  The license and distribution terms for this file may be
11 *  found in the file LICENSE in this distribution or at
12 *  http://www.rtems.com/license/LICENSE.
13 *
14 *  $Id$
15 */
16
17#ifndef __NO_BSP_h
18#define __NO_BSP_h
19
20#ifdef __cplusplus
21extern "C" {
22#endif
23
24#include <bspopts.h>
25
26#include <rtems.h>
27#include <console.h>
28#include <clockdrv.h>
29
30/*
31 *  confdefs.h overrides for this BSP:
32 *   - number of termios serial ports (defaults to 1)
33 *   - Interrupt stack space is not minimum if defined.
34 */
35
36/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
37#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
38
39/*
40 *  Define the time limits for RTEMS Test Suite test durations.
41 *  Long test and short test duration limits are provided.  These
42 *  values are in seconds and need to be converted to ticks for the
43 *  application.
44 *
45 */
46
47#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
48#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
49
50/*
51 *  Stuff for Time Test 27
52 */
53
54#define MUST_WAIT_FOR_INTERRUPT 0
55
56#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
57
58#define Cause_tm27_intr()
59
60#define Clear_tm27_intr()
61
62#define Lower_tm27_intr()
63
64/*
65 *  Simple spin delay in microsecond units for device drivers.
66 *  This is very dependent on the clock speed of the target.
67 */
68
69#define rtems_bsp_delay( microseconds ) \
70  { \
71  }
72
73/* Constants */
74
75#define RAM_START 0
76#define RAM_END   0x100000
77
78/* miscellaneous stuff assumed to exist */
79
80extern rtems_configuration_table BSP_Configuration;
81
82/*
83 *  Device Driver Table Entries
84 */
85
86/*
87 * NOTE: Use the standard Console driver entry
88 */
89 
90/*
91 * NOTE: Use the standard Clock driver entry
92 */
93
94/* functions */
95
96void bsp_cleanup( void );
97
98no_cpu_isr_entry set_vector(                    /* returns old vector */
99  rtems_isr_entry     handler,                  /* isr routine        */
100  rtems_vector_number vector,                   /* vector number      */
101  int                 type                      /* RTEMS or RAW intr  */
102);
103
104#ifdef __cplusplus
105}
106#endif
107
108#endif
109/* end of include file */
Note: See TracBrowser for help on using the repository browser.