source: rtems/c/src/lib/libbsp/mips/rbtx4925/ChangeLog @ afab2f7

4.115
Last change on this file since afab2f7 was afab2f7, checked in by Ralf Corsepius <ralf.corsepius@…>, on Jun 19, 2011 at 7:27:07 AM

2011-06-19 Ralf Corsépius <ralf.corsepius@…>

  • Makefile.am: Fix broken path to clockdrv_shell.h.
  • Property mode set to 100644
File size: 9.2 KB
Line 
12011-06-19      Ralf Corsépius <ralf.corsepius@rtems.org>
2
3        * Makefile.am: Fix broken path to clockdrv_shell.h.
4
52011-02-02      Ralf Corsépius <ralf.corsepius@rtems.org>
6
7        * configure.ac: Require autoconf-2.68, automake-1.11.1.
8
92010-05-13      Joel Sherrill <joel.sherrill@oarcorp.com>
10
11        * Makefile.am, preinstall.am: Many files were duplicated across MIPS
12        BSPs. Now those which were directly copied are shared.
13        * liblnk/lnklib.S, liblnk/pmon.S, liblnk/regs.h, startup/idtmem.S:
14        Removed.
15
162010-05-13      Joel Sherrill <joel.sherrill@oarcorp.com>
17
18        * configure.ac: rbtx4925, rbtx4938, and hurricane had very similar
19        versions of exception. Now all use shared/irq/exception.S
20
212010-05-13      Joel Sherrill <joel.sherrill@oarcorp.com>
22
23        * Makefile.am: rbtx4925 and rbtx4938 had copies of the same file with
24        only minor differences. Both now use shared/irq/exception.S
25        * startup/exception.S: Removed.
26
272010-04-27      Joel Sherrill <joel.sherrill@oarcorp.com>
28
29        * startup/linkcmds: Revert previous change. Remove .reginfo from .bss
30        section where it was present.
31
322010-04-25      Joel Sherrill <joel.sherrilL@OARcorp.com>
33
34        * startup/linkcmds: Add NOLOAD to .bss to eliminate warnings.
35
362010-04-24      Joel Sherrill <joel.sherrill@oarcorp.com>
37
38        * start/start.S: Verify boot_card is invoked properly with argc, argv.
39
402009-11-16      Ralf Corsépius <ralf.corsepius@rtems.org>
41
42        * startup/bspstart.c: Remove nested externs.
43        #include <libcpu/isr_entries.h.
44
452009-10-21      Ralf Corsépius <ralf.corsepius@rtems.org>
46
47        * make/custom/rbtx4925.cfg: Remove RTEMS_BSP_FAMILY.
48
492009-10-20      Ralf Corsépius <ralf.corsepius@rtems.org>
50
51        * configure.ac: Don't add -ansi -fasm to CFLAGS.
52
532009-10-15      Ralf Corsépius <ralf.corsepius@rtems.org>
54
55        * make/custom/rbtx4925.cfg: New (relocated from /make/custom).
56
572009-09-15      Ralf Corsépius <ralf.corsepius@rtems.org>
58
59        * configure.ac: Remove RTEMS_BSP_BOOTCARD_OPTIONS.
60
61 2009-07-16     Joel Sherrill <joel.sherrill@oarcorp.com>
62
63        * configure.ac: Rename BSP_BOOTCARD_OPTIONS to
64        RTEMS_BSP_BOOTCARD_OPTIONS. Add RTEMS_BSP_CLEANUP_OPTIONS so all BSPs
65        have the same options.
66
672009-04-28      Chris Johns <chrisj@rtems.org>
68
69        * start/start.S: Update for boot_card command line change.
70
712009-03-12      Joel Sherrill <joel.sherrill@OARcorp.com>
72
73        PR 1385/cpukit
74        * startup/exception.S: When the type rtems_boolean was switched to the
75        C99 bool, the size changed from 4 bytes to 1 byte. The interrupt
76        dispatching code accesses two boolean variables for scheduling
77        purposes and the assembly implementations of this code did not get
78        updated.
79
802008-12-04      Joel Sherrill <joel.sherrill@oarcorp.com>
81
82        * bsp_specs: Move -e start from *link to *startfile to avoid warning
83        for undefined entry symbol when linking relocatables with binutils
84        2.19.
85
862008-10-02      Joel Sherrill <joel.sherrill@OARcorp.com>
87
88        * Makefile.am, preinstall.am: Use shared tm27.h stub.
89        * include/tm27.h: Removed.
90
912008-09-30      Ralf Corsépius <ralf.corsepius@rtems.org>
92
93        * clock/clockdrv.c: include "../../../shared/clockdrv_shell.h".
94        * Makefile.am: Reflect changes above.
95
962008-09-29      Ralf Corsépius <ralf.corsepius@rtems.org>
97
98        * Makefile.am: Eliminate bsp.am. Build startup files as side-effect
99        of building libbspstart.a, using automake-rules.
100
1012008-09-29      Ralf Corsépius <ralf.corsepius@rtems.org>
102
103        * liblnk/regs.S: Remove (Renamed into liblnk/regs.h).
104        * liblnk/regs.h: New (Renamed from liblnk/regs.S).
105        * Makefile.am, liblnk/pmon.S: Reflect renamer.
106
1072008-09-29      Ralf Corsépius <ralf.corsepius@rtems.org>
108
109        * Makefile.am: Eliminate *_SOURCES.
110
1112008-09-29      Ralf Corsépius <ralf.corsepius@rtems.org>
112
113        * Makefile.am: Move noinst_LIBRARIES = libbsp.a before its
114        components.
115
1162008-09-26      Ralf Corsépius <ralf.corsepius@rtems.org>
117
118        * Makefile.am: Cleanup ../../shared/include/bootcard.h handling.
119
1202008-09-23      Joel Sherrill <joel.sherrill@oarcorp.com>
121
122        * configure.ac: Make letting boot_card() handle work area allocation
123        mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to
124        BSP_BOOTCARD_OPTIONS.
125
1262008-09-23      Joel Sherrill <joel.sherrill@oarcorp.com>
127
128        * startup/bspclean.c: Removed.
129
1302008-09-18      Joel Sherrill <joel.sherrill@oarcorp.com>
131
132        * include/bsp.h: Remove unnecessary boilerplate comments.
133
1342008-09-16      Joel Sherrill <joel.sherrill@oarcorp.com>
135
136        * Makefile.am, startup/linkcmds: Use top level shared
137        bsp_get_work_area() implementation.
138        * startup/bspgetworkarea.c: Removed.
139
1402008-09-16      Joel Sherrill <joel.sherrill@oarcorp.com>
141
142        * startup/bspstart.c: Remove unnecessary includes of
143        rtems/libcsupport.h and rtems/libio.h.
144
1452008-09-14      Joel Sherrill <joel.sherrill@oarcorp.com>
146
147        * Makefile.am, configure.ac, startup/bspstart.c: Create
148        bsp_get_work_area() into its own file and use BSP Framework to
149        perform more initialization.
150        * startup/bspgetworkarea.c: New file.
151
1522008-09-10      Joel Sherrill <joel.sherrill@oarcorp.com>
153
154        * include/bsp.h: Review of all bsp_cleanup() implementations. In this
155        phase, all prototypes were removed from bsp.h and empty
156        implementations were removed and made to use the shared stub.
157
1582008-09-05      Ralf Corsépius <ralf.corsepius@rtems.org>
159
160        * console/console-io.c: Convert to "bool".
161
1622008-05-15      Joel Sherrill <joel.sherrill@OARcorp.com>
163
164        * startup/bspstart.c: Add capability for bootcard.c BSP Initialization
165        Framework to ask the BSP where it has memory for the RTEMS Workspace
166        and C Program Heap. These collectively are referred to as work area.
167        If the BSP supports this, then it does not have to include code to
168        split the available memory between the two areas. This reduces the
169        amount of code in the BSP specific bspstart.c file. Additionally, the
170        shared framework can initialize the C Library, call
171        rtems_debug_enable(), and dirty the work area memory. Until most/all
172        BSPs support this new capability, if the BSP supports this, it should
173        call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
174        When the transition is complete, this autoconf macro can be removed.
175
1762008-05-14      Joel Sherrill <joel.sherrill@OARcorp.com>
177
178        * Makefile.am: Rework to avoid .rel files.
179
1802008-05-12      Joel Sherrill <joel.sherrill@OARcorp.com>
181
182        * startup/bspstart.c: Refactored and renamed initialization routines to
183        rtems_initialize_data_structures, rtems_initialize_before_drivers,
184        rtems_initialize_device_drivers, and
185        rtems_initialize_start_multitasking. This opened the sequence up so
186        that bootcard() could provide a more robust and flexible framework
187        which is easier to explain and understand. This also lays the
188        groundwork for sharing the division of available memory between the
189        RTEMS workspace and heap and the C library initialization across all
190        BSPs.
191
1922008-03-03      Joel Sherrill <joel.sherrill@OARcorp.com>
193
194        * startup/linkcmds: Add wildcard to gcc_except_table section so
195        programs compiled with gcc 4.3.x can link.
196
1972007-12-11      Joel Sherrill <joel.sherrill@OARcorp.com>
198
199        * include/bsp.h, startup/bspstart.c: Eliminate copies of the
200        Configuration Table. Use the RTEMS provided accessor macros to obtain
201        configuration fields.
202
2032007-12-04      Joel Sherrill <joel.sherrill@OARcorp.com>
204
205        * startup/bspstart.c: Move interrupt_stack_size field from CPU Table to
206        Configuration Table. Eliminate CPU Table from all ports. Delete
207        references to CPU Table in all forms.
208
2092007-12-03      Joel Sherrill <joel.sherrill@OARcorp.com>
210
211        * Makefile.am, startup/bspstart.c: Moved most of the remaining CPU
212        Table fields to the Configuration Table. This included
213        pretasking_hook, predriver_hook, postdriver_hook, idle_task,
214        do_zero_of_workspace, extra_mpci_receive_server_stack,
215        stack_allocate_hook, and stack_free_hook. As a side-effect of this
216        effort some multiprocessing code was made conditional and some style
217        clean up occurred.
218
2192007-04-12      Ralf Corsépius <ralf.corsepius@rtems.org>
220
221        * bsp_specs: Remove qrtems_debug.
222
2232007-04-09      Ralf Corsépius <ralf.corsepius@rtems.org>
224
225        * bsp_specs: Remove --oformat=...
226        Use old_link for -qrtems (Prevents *.link from killing endianness).
227
2282007-04-06      Ralf Corsépius <ralf.corsepius@rtems.org>
229
230        * bsp_specs: Remove lib (Now expected to exist in GCC).
231
2322007-03-12      Joel Sherrill <joel@OARcorp.com>
233
234        * console/console-io.c, startup/exception.S: Correct license URL and/or
235        fix mistake in copyright notice. Both of these mistakes appear to be
236        from code submitted after these changes were made previously.
237
2382007-03-10      Joel Sherrill <joel@OARcorp.com>
239
240        PR 1227/bsps
241        * include/bsp.h: Remove MAX_LONG_TEST_DURATION and
242        MAX_SHORT_TEST_DURATION. They are obsolete and unused.
243
2442006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
245
246        * configure.ac: New BUG-REPORT address.
247
2482006-11-15      Joel Sherrill <joel@OARcorp.com>
249
250        * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
251        file and simplified initialization.
252
2532006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
254
255        * Makefile.am: Remove superfluous -DASM.
256
2572006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
258
259        * configure.ac: Require autoconf-2.60. Require automake-1.10.
260
2612006-03-22      Joel Sherrill <joel@OARcorp.com>
262
263        * include/.cvsignore: New file.
264
2652006-03-16      Ralf Corsépius <ralf.corsepius@rtems.org>
266
267        * liblnk/pmon.S, liblnk/regs.S, liblnk/lnklib.S,
268        README, bsp_specs, configure.ac, startup/inittlb.c,
269        startup/bspstart.c, startup/idtmem.S, startup/exception.S,
270        startup/bspclean.c, startup/idttlb.S, startup/linkcmds,
271        include/tm27.h, include/bsp.h, clock/clockdrv.c, Makefile.am,
272        start/start.S, console/console-io.c:
273        New (Submission by Bruce Robinson <brucer@pmccorp.com>).
274
275        * The RBTX4925 BSP is for a Toshiba TX4925 evaluation board.
276
Note: See TracBrowser for help on using the repository browser.