source: rtems/c/src/lib/libbsp/mips/jmr3904/ChangeLog @ 7a97f26

4.104.114.84.95
Last change on this file since 7a97f26 was 7a97f26, checked in by Ralf Corsepius <ralf.corsepius@…>, on 03/11/03 at 10:43:44

Merger from rtems-4-6-branch.

  • Property mode set to 100644
File size: 8.0 KB
Line 
12003-03-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
2
3        * configure.ac: Remove AC_CONFIG_AUX_DIR.
4
52003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
6
7        * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
8
92003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
10
11        * configure.ac: AC_PREREQ(2.57).
12
132003-01-20      Joel Sherrill <joel@OARcorp.com>
14
15        * startup/linkcmds*: Add FreeBSD sysctl() sections.
16
172002-12-08      Greg Menke <gregory.menke@gsfc.nasa.gov>
18 
19        * bsp_specs: Added crtbegin/crtend and INIT_FINI for C++ support.
20        * linkcmds: Added .init, .fini & related sections.
21
222002-12-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
23
24        * clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
25        * console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
26        * start/Makefile.am: Don't include @RTEMS_BSP@.cfg.
27        * startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
28        * timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
29
302002-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
31
32        * start/Makefile.am: Use install-data-local to install startfile.
33
342002-12-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
35
36        * wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
37
382002-11-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
39
40        * configure.ac: Remove RTEMS_OUTPUT_BUILD_SUBDIRS. Cosmetical
41        changes.
42
432002-11-01      Joel Sherrill <joel@OARcorp.com>
44
45        * startup/bspclean.c, startup/bspstart.c: Removed warnings.
46
472002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
48
49        * .cvsignore: Reformat.
50        Add autom4te*cache.
51        Remove autom4te.cache.
52
532002-08-21      Joel Sherrill <joel@OARcorp.com>
54
55        * startup/linkcmds: Move .init section after text section so
56        C+ global constructors work.
57
582002-08-21      Joel Sherrill <joel@OARcorp.com>
59
60        * bsp_specs: Added support for -nostdlibs.
61
622002-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
63
64        * clock/Makefile.am: Use .$(OBJEXT) instead of .o.
65        * console/Makefile.am: Use .$(OBJEXT) instead of .o.
66        * start/Makefile.am: Use .$(OBJEXT) instead of .o.
67        * startup/Makefile.am: Use .$(OBJEXT) instead of .o.
68        * timer/Makefile.am: Use .$(OBJEXT) instead of .o.
69        * wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
70
712002-07-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
72
73        * start/Makefile.am: Eliminate PGM.
74        Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.
75
762002-07-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
77
78        * startup/Makefile.am: Add bsplib_DATA = linkcmds.
79
802002-07-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
81
82        * wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
83        Remove $(OBJS) from all-local.
84
852002-07-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
86
87        * wrapup/Makefile.am: Add $(LIB) to all-local.
88
892002-06-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
90
91        * wrapup/Makefile.am: Remove preinstallation of libbsp.a,
92
932002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
94
95        * configure.ac:
96        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
97        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
98        * clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
99        * Makefile.am: Remove AUTOMAKE_OPTIONS.
100        * console/Makefile.am: Remove AUTOMAKE_OPTIONS.
101        * include/Makefile.am: Remove AUTOMAKE_OPTIONS.
102        * start/Makefile.am: Remove AUTOMAKE_OPTIONS.
103        * startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
104        * timer/Makefile.am: Remove AUTOMAKE_OPTIONS.
105        * wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
106
1072002-01-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
108
109        * console/console-io.c: Include rtems/bspIo.h instead of bspIo.h.
110
1112001-11-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
112
113        * configure.ac: Introduce RTEMS_BSP_CONFIGURE.
114
1152001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
116
117        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
118        * configure.in: Remove.
119        * configure.ac: New file, generated from configure.in by autoupdate.
120
1212001-09-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
122
123        * include/Makefile.am: Use 'CLEANFILES ='.
124        * include/Makefile.am: Use 'TMPINSTALL_FILES ='.
125
1262001-05-23      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
127
128        * configure.in: Add bspopts.h.
129        * include/bsp.h: Include bspopts.h.
130        * include/.cvsignore: Add bspopts.h*, coverhd.h, stamp-h*.
131        * include/Makefile.am: Use *_HEADERS instead of *H_FILES.
132
1332001-05-11      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>
134
135        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
136
1372001-05-11      Joel Sherrill <joel@OARcorp.com>
138
139        * tools/runtest: Add functionality to avoid letting simulator
140        run too long.
141
1422001-04-20      Joel Sherrill <joel@OARcorp.com>
143
144        * include/bsp.h (Clear_tm27_intr): Stop the timer and disable
145        the interrupt.  This was not quite right before and we were
146        getting uncontrolled interrupt nesting in tm27.
147        * timer/timer.c (Timer_Initialize): Added an extra reset and
148        changed the ITMR register so we will never get an interrupt.
149        (Read_timer): Fixed so the timer actually stops before it
150        is read.  Before some times reported were outraguously high.
151        * start/start.S: Major clean including using stack in linkcmds,
152        deleting unused code, and zeroing the BSS using the linkcmds
153        information.
154        * startup/linkcmds: Put heap in lower memory than workspace
155        and move _clear_end so both are zeroed.
156
1572001-01-12      Joel Sherrill <joel@OARcorp.com>
158
159        * include/bsp.h, timer/timer.c: Updated so timer appears to
160        work and support tm27.  I would prefer to time a software
161        interrupt rather than an use an extra timer though.
162
1632001-01-09      Joel Sherrill <joel@OARcorp.com>
164
165        * clock/clockdrv.c: Clean up.
166        * include/bsp.h: Uncomment and fix set_vector() prototype.
167
1682001-01-03      Joel Sherrill <joel@OARcorp.com>
169
170        * console/console-io.c: Removed unused variable initialized.
171
1722001-01-03      Joel Sherrill <joel@OARcorp.com>
173
174        * clock/Makefile.am: Fixed reference to ckinit.c.
175        * clock/clockdrv.c: Enabled fast idle.
176        * console/console-io.c: Added console_initialize_hardware().
177
1782000-12-19      Joel Sherrill <joel@OARcorp.com>
179
180        * timer: New subdirectory.
181        * timer/.cvsignore, timer/Makefile.am, timer/timer.c: New files.
182        * tools/ChangeLog: New file.
183
1842000-12-19      Joel Sherrill <joel@OARcorp.com>
185
186        * Makefile.am: Added tools subdirectory and removed commented out line.
187        * configure.in: Added tools subdirectory.
188        * tools: New subdirectory.
189        * tools/.cvsignore, tools/Makefile.am, tools/configure.in,
190        tools/runtest: New files -- based on powerpc/psim.
191        * clock/clockdrv.c: Guessed new value for clock tick.  Need to
192        add fast idle support.
193        * include/bsp.h: tm27 support initiated.
194        * Most tests appear to run correctly!
195
1962000-12-13      Joel Sherrill <joel@OARcorp.com>
197
198        * README: Updated.  We are now vectoring a clock tick ISR handler.
199        But RTEMS is not returning from the ISR properly.
200        * clock/clockdrv.c: Now causes interrupts but has not been calibrated.
201        * include/bsp.h: Use <libcpu/tx3904.h>
202        * startup/Makefile.am: Add setvec.c from shared.
203        * startup/bspstart.c: Initialize the status register (SR) so
204        no interrupts are masked but global interrupts (SR_IEC) are off.
205        Added call to install the ISR prologue code.
206        * wrapup/Makefile.am: Pick up more pieces from libcpu.
207
2082000-12-11      Joel Sherrill <joel@OARcorp.com>
209
210        * startup/bspclean.c: New file to explicitly invoke _sys_exit().
211        * README: Updated.
212
2132000-12-06      Joel Sherrill <joel@OARcorp.com>
214
215        * README: Updated to reflect status.
216        * startup/linkcmds: Added .ctor and .dtor sections to no avail.
217
2182000-11-30      Joel Sherrill <joel@OARcorp.com>
219
220        * README: Updated to reflect current status.  Misaligned reference
221        during initialization may be compiler problem.
222        * console/console-io.c: Added support for printk().
223        * startup/linkcmds: Reserve 512K for RTEMS Workspace.
224
2252000-11-27      Joel Sherrill <joel@OARcorp.com>
226
227        * startup/linkcmds: Fix typo and add extra 0 to base address.
228        Now runs until printf() tries to put a character and then
229        it locks up checking a status bit that does not change.
230
2312000-11-25      Joel Sherrill <joel@OARcorp.com>
232
233        * The JMR BSP is for a Toshiba TX39 evaluation board but
234        can also be used with the mips simulator in gdb.
235        * .cvsignore, ChangeLog, Makefile.am, README, bsp_specs,
236        configure.in, clock/.cvsignore, clock/Makefile.am,
237        clock/clockdrv.c, console/.cvsignore, console/Makefile.am,
238        console/console-io.c, include/.cvsignore,
239        include/Makefile.am, include/bsp.h, start/.cvsignore,
240        start/Makefile.am, start/regs.S, start/start.S,
241        startup/.cvsignore, startup/Makefile.am, startup/bspstart.c,
242        startup/linkcmds, wrapup/.cvsignore, wrapup/Makefile.am: New files.
Note: See TracBrowser for help on using the repository browser.