source: rtems/c/src/lib/libbsp/m68k/uC5282/ChangeLog @ 33fc4f6

Last change on this file since 33fc4f6 was 33fc4f6, checked in by Eric Norum <WENorum@…>, on Feb 5, 2007 at 3:27:26 PM

Enable RTS/CTS flow-control pins.

  • Property mode set to 100644
File size: 6.5 KB
Line 
12007-02-05  Eric Norum <norume@aps.anl.gov>
2
3        * console/console.c: Enable RTS/CTS flow-control pins.
4
52007-01-21  Eric Norum <norume@aps.anl.gov>
6
7        * network/network.c: Add capability to lock at 10-half.
8        Expand report to include auto/fixed status.
9
102006-12-18      Till Straumann <strauman@slac.stanford.edu>
11
12        * startup/bspstart.c: Changed BSP_installVME_isr() so that
13        the special handling of a 'FPGA interrupt' [this FPGA is *not*
14        present on the uC5282 module but is externally connected to
15        IRQ1 on Eric Norum's particular 'motherboard'] is only
16        activated when connecting to the special vectors > 192.
17        The change allows us ordinary users [:-)] to use IRQ1
18        normally, simply by connecting an ISR to vector 64+1...
19        Also, BSP_enable_irq_at_pic(), BSP_disable_irq_at_pic(),
20        BSP_irq_is_enabled_at_pic() were introduced (compat. with
21        some PPC BSPs).
22
232006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
24
25        * configure.ac: New BUG-REPORT address.
26
272006-10-30      Joel Sherrill <joel@OARcorp.com>
28
29        * include/.cvsignore: New file.
30
312006-10-20      Ralf Corsépius <ralf.corsepius@rtems.org>
32
33        * Makefile.am: Remove superfluous -DASM.
34
352006-10-20      Ralf Corsépius <ralf.corsepius@rtems.org>
36
37        * include/bspopts.h.in: Remove (bogus).
38
392006-10-19      Ralf Corsépius <ralf.corsepius@rtems.org>
40
41        * configure.ac: Require automake-1.10. Require autoconf-2.60.
42
432006-08-01  Eric Norum <norume@aps.anl.gov>
44
45        * startup/bspstart.c: Add bsp_setbenv system call.
46
472006-05-15  Eric Norum <norume@aps.anl.gov>
48
49        * startup/bspstart.c: Add checks for FPGA interrupt request overflow.
50                          Allow single spurious FPGA interrupt.
51
522006-04-11  Eric Norum <norume@aps.anl.gov>
53
54        * startup/bspstart.c: Install default exception handler.
55
562006-03-24  Eric Norum <norume@aps.anl.gov>
57
58        * startup/bspstart.c: Add missing reset-cause bit.
59
602006-02-08      Joel Sherrill <joel@OARcorp.com>
61
62        * startup/linkcmds: Add sections required by newer gcc versions.
63
642006-02-06  Eric Norum <norume@aps.anl.gov>
65
66    * clock/clock.c: Avoid division by zero.
67
682006-01-29  Eric Norum <norume@aps.anl.gov>
69
70        * clock/clock.c, network/network.c, startup/bspstart.c:
71        Add an 'extended BSP' routine which returns the CPU load average.
72
732006-01-11      Ralf Corsepius <ralf.corsepius@rtems.org>
74
75        * Makefile.am: Add preinstall.am.
76
772005-12-19  Eric Norum <norume@aps.anl.gov>
78
79    * startup/bspstart.c: Add another 'extended BSP' routine which return
80                          reboot status register information.
81
822005-11-12      Ralf Corsepius <ralf.corsepius@rtems.org>
83
84        * bsp_specs: Remove %cpp.
85
862005-11-11  Eric Norum <norume@aps.anl.gov>
87
88    * console/console.c: Clean up UART2 pin setup.  Protect pin setup code.
89
902005-11-08  Eric Norum <norume@aps.anl.gov>
91
92    * console/console.c: Add code to set up pin assignments
93
942005-11-07  Eric Norum <norume@aps.anl.gov>
95
96    * Almost everything: Assign copyright to OAR.
97
982005-10-26  Eric Norum <norume@aps.anl.gov>
99
100        * README, network/network.c: Add support for forcing link parameters.
101
1022005-09-16  Eric Norum <norume@aps.anl.gov>
103
104        * startup/bspstart.c: Add bsp_reset bootrom call.
105        * startup/bspclean.c: Call bsp_reset from bsp_cleanup().
106
1072005-07-05  Eric Norum <norume@aps.anl.gov>
108
109        * startup/linkcmdc: Add .gnu.linkonce.b
110
1112005-07-05  Eric Norum <norume@aps.anl.gov>
112
113        * startup/bspstart.c: Ensure that CS[12]n are enabled.
114
1152005-06-28  Eric Norum <norume@aps.anl.gov>
116
117        * network/network.c: Add full/half-duplex auto-negotiation support.
118
1192005-06-20  Eric Norum <norume@aps.anl.gov>
120
121        * network/network.c: Clean up transmit buffer realignment.  Many
122        thanks to Mr. Kolja Waschk for identifying the problem.
123
1242005-05-26      Ralf Corsepius <ralf.corsepius@rtems.org>
125
126        * include/bsp.h: New header guard.
127
1282005-05-23  Eric Norum <norume@aps.anl.gov>
129
130        * startup/linkcmds
131          startup/bspstart.c: Followup fix to Joel's/Chris's VBR changes.
132
1332005-05-11  Eric Norum <norume@aps.anl.gov>
134
135        * startup/bspstart.c: Followup fix to Joel's changes of 2005-05-03.
136
1372005-05-10  Eric Norum <norume@aps.anl.gov>
138
139        * network/network.c: Poke RDAR/TDAR every time.
140                         Add more diagnostic printout.
141
1422005-05-03      Joel Sherrill <joel@OARcorp.com>
143
144        * startup/init5282.c: Remove use of _Coldfire_VBR and use _VBR as rest
145        of m68k family.
146
1472005-04-26      Joel Sherrill <joel@OARcorp.com>
148
149        * network/network.c: Eliminate warnings.
150
1512005-04-20  Eric Norum <norume@aps.anl.gov>
152
153        * startup/bspstart.c
154        * network/network.c: Try instruction-only cache.
155
1562005-04-19  Eric Norum <norume@aps.anl.gov>
157
158        * startup/bspstart.c: Expose read/write copy of cache control registers
159                          in case some application diagnostic code wants to
160                          display the values.
161
1622005-04-13  Eric Norum <norume@aps.anl.gov>
163
164        * network/network.c: Add some more diagnostics.
165                         Poke TDAR/RDAR only when necessary.
166
1672005-04-10  Eric Norum <norume@aps.anl.gov>
168
169        * startup/bspstart.c: Set up IRQ1* handling properly.
170
1712005-04-08  Eric Norum <norume@aps.anl.gov>
172
173        * startup/bspstart.c: FPGA interrupt status register is now 16-bit.
174
1752005-03-12  Eric Norum <norume@aps.anl.gov>
176
177        * network/network.c: Add statistics counter for number of realigned bytes.
178
1792005-03-10  Eric Norum <norume@aps.anl.gov>
180
181        * startup/bspstart.c: Add NOP after CACR writes (work around hardware bug).
182
1832005-02-14  Eric Norum <norume@aps.anl.gov>
184
185        * startup/bspstart.c: Don't cache flash -- it messes up programming.
186
1872005-02-04      Ralf Corsepius <ralf.corsepius@rtems.org>
188
189        * console/console.c, include/bsp.h, network/network.c,
190        startup/bspstart.c: Remove obsolete fixed size types.
191
1922005-02-04      Ralf Corsepius <ralf.corsepius@rtems.org>
193
194        * startup/bspstart.c:
195        rtems_interrupt_catch(trampoline, vector, &old_handler).
196
1972005-02-03  Eric Norum <norume@aps.anl.gov>
198
199        * include/bsp.h, startup/bspstart.c: Add 'extended' BSP
200        support (pseudo-VME).
201
2022005-02-02  Eric Norum <norume@aps.anl.gov>
203
204        * network/network.c: Lock FEC/PHYS at 100 Mbs, full-duplex
205
2062005-02-01  Eric Norum <norume@aps.anl.gov>
207
208        * include/bsp.h, network/network.c, startup/bspstart.c: Add some
209          bootprom system calls.
210
2112005-02-01  Eric Norum <norume@aps.anl.gov>
212
213        * start/start.S, network/network.c: Place FEC buffer descriptors
214        in SRAM.  No longer need to worry about buffer descriptor caching.
215
2162005-01-31  Eric Norum <norume@aps.anl.gov>
217
218        * network/network.c, startup/bspstart.c: Processor doesn't snoop
219        FEC DMA so we must invalidate the cache appropriately.
220
2212005-01-31      Joel Sherrill <joel@OARcorp.com>
222
223        * .cvsignore: New file.
224
2252005-01-28      Eric Norum <norume@aps.anl.gov>
226
227        * uC5282: New BSP
228        * acinclude.m4: uC5282 BSP
229
Note: See TracBrowser for help on using the repository browser.