1 | /* include/bspopts.h.in. Generated from configure.ac by autoheader. */ |
---|
2 | |
---|
3 | /* If defined, then the BSP Framework will put a non-zero pattern into the |
---|
4 | RTEMS Workspace and C program heap. This should assist in finding code that |
---|
5 | assumes memory starts set to zero. */ |
---|
6 | #undef BSP_DIRTY_MEMORY |
---|
7 | |
---|
8 | /* If defined, print a message and wait until pressed before resetting board |
---|
9 | when application exits. */ |
---|
10 | #undef BSP_PRESS_KEY_FOR_RESET |
---|
11 | |
---|
12 | /* If defined, reset the board when the application exits. */ |
---|
13 | #undef BSP_RESET_BOARD_AT_EXIT |
---|
14 | |
---|
15 | /* Interrupt level for the CD2401(when CD2401_IO_MODE == 1). */ |
---|
16 | #undef CD2401_INT_LEVEL |
---|
17 | |
---|
18 | /* 0 for polled I/O, 1 for interrupt-driven. */ |
---|
19 | #undef CD2401_IO_MODE |
---|
20 | |
---|
21 | /* 1 for using termios based console. */ |
---|
22 | #undef CD2401_USE_TERMIOS |
---|
23 | |
---|
24 | /* Port to use for the RTEMS console. 0 - /dev/tty0, Serial Port 1/Console on |
---|
25 | the MVME712M. 1 - /dev/tty1, Serial Port 2/TTY01 on the MVME712M. 2 - |
---|
26 | /dev/tty2, Serial Port 3 on the MVME712M. 3 - /dev/tty3, Serial Port 4 on |
---|
27 | the MVME712M. */ |
---|
28 | #undef CONSOLE_MINOR |
---|
29 | |
---|
30 | /* Define to the address where bug reports for this package should be sent. */ |
---|
31 | #undef PACKAGE_BUGREPORT |
---|
32 | |
---|
33 | /* Define to the full name of this package. */ |
---|
34 | #undef PACKAGE_NAME |
---|
35 | |
---|
36 | /* Define to the full name and version of this package. */ |
---|
37 | #undef PACKAGE_STRING |
---|
38 | |
---|
39 | /* Define to the one symbol short name of this package. */ |
---|
40 | #undef PACKAGE_TARNAME |
---|
41 | |
---|
42 | /* Define to the home page for this package. */ |
---|
43 | #undef PACKAGE_URL |
---|
44 | |
---|
45 | /* Define to the version of this package. */ |
---|
46 | #undef PACKAGE_VERSION |
---|
47 | |
---|
48 | /* Port to use for printk debugging output. 0 - /dev/tty0, Serial Port |
---|
49 | 1/Console on the MVME712M. 1 - /dev/tty1, Serial Port 2/TTY01 on the |
---|
50 | MVME712M. 2 - /dev/tty2, Serial Port 3 on the MVME712M. 3 - /dev/tty3, |
---|
51 | Serial Port 4 on the MVME712M. */ |
---|
52 | #undef PRINTK_MINOR |
---|
53 | |
---|
54 | /* If building the mvme167 BSP */ |
---|
55 | #undef mvme167 |
---|