/* void Shm_Get_configuration( localnode, &shmcfg ) * * This routine initializes, if necessary, and returns a pointer * to the Shared Memory Configuration Table for the MVME147. * * INPUT PARAMETERS: * localnode - local node number * shmcfg - address of pointer to SHM Config Table * * OUTPUT PARAMETERS: * *shmcfg - pointer to SHM Config Table * * NOTES: The SIGLP interrupt on the MVME147 is used as an interprocessor * interrupt. * * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://www.rtems.com/license/LICENSE. * * MVME147 port for TNI - Telecom Bretagne * by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr) * June 1996 * * $Id$ */ #include #include #include "shm_driver.h" #define INTERRUPT 1 /* MVME147 target supports both */ #define POLLING 0 /* polling and interrupt modes */ shm_config_table BSP_shm_cfgtbl; rtems_unsigned32 *BSP_int_address() { rtems_unsigned32 id, offset; id = (rtems_unsigned32) vme_lcsr->gcsr_base_address; offset = (id << 4) & 0xF0; offset |= 0xffff0003; /* points to GCSR global 1 */ return( (rtems_unsigned32 * ) offset ); } void Shm_Get_configuration( rtems_unsigned32 localnode, shm_config_table **shmcfg ) { /* A shared mem space has bee left between RAM_END and DRAM_END on the first node*/ if (localnode == 1) BSP_shm_cfgtbl.base = (vol_u32 *) RAM_END; else BSP_shm_cfgtbl.base = (vol_u32 *) (DRAM_END + RAM_END); BSP_shm_cfgtbl.length = DRAM_END - RAM_END; BSP_shm_cfgtbl.format = SHM_BIG; BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt; #ifdef NEUTRAL_BIG BSP_shm_cfgtbl.convert = NULL_CONVERT; #else BSP_shm_cfgtbl.convert = CPU_swap_u32; #endif #if (POLLING==1) BSP_shm_cfgtbl.poll_intr = POLLED_MODE; BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT; BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT; BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT; #else BSP_shm_cfgtbl.poll_intr = INTR_MODE; BSP_shm_cfgtbl.Intr.address = BSP_int_address(); /* GCSR global 1 */ BSP_shm_cfgtbl.Intr.value = 0x01; /* SIGLP */ BSP_shm_cfgtbl.Intr.length = BYTE; #endif *shmcfg = &BSP_shm_cfgtbl; }