source: rtems/c/src/lib/libbsp/m68k/mcf5235/ChangeLog @ 288f1c33

4.104.114.9
Last change on this file since 288f1c33 was 288f1c33, checked in by Chris Johns <chrisj@…>, on May 29, 2008 at 6:01:33 AM

2008-05-29 Chris Johns <chrisj@…>

  • include/bsp.h: FEC unit numbers based on 0 not 1. Change the interface name to fec0.
  • Property mode set to 100644
File size: 6.2 KB
Line 
12008-05-29      Chris Johns <chrisj@rtems.org>
2
3        * include/bsp.h: FEC unit numbers based on 0 not 1. Change the
4        interface name to fec0.
5
62008-05-23      Joel Sherrill <joel.sherrill@OARcorp.com>
7
8        * console/console.c: Eliminate copies of switches to convert termios
9        Bxxx constants to xxx as an integer. Use the shared
10        termios_baud_to_number() routine to do the same conversion.
11
122008-05-14      Joel Sherrill <joel.sherrill@OARcorp.com>
13
14        * Makefile.am: Rework to avoid .rel files.
15
162008-05-12      Joel Sherrill <joel.sherrill@OARcorp.com>
17
18        * startup/bspstart.c: Refactored and renamed initialization routines to
19        rtems_initialize_data_structures, rtems_initialize_before_drivers,
20        rtems_initialize_device_drivers, and
21        rtems_initialize_start_multitasking. This opened the sequence up so
22        that bootcard() could provide a more robust and flexible framework
23        which is easier to explain and understand. This also lays the
24        groundwork for sharing the division of available memory between the
25        RTEMS workspace and heap and the C library initialization across all
26        BSPs.
27
282008-04-23      Joel Sherrill <joel.sherrill@OARcorp.com>
29
30        * console/console.c: Remove all references to console_reserve_resources
31        and termios_reserve_resources.
32
332008-03-03      Joel Sherrill <joel.sherrill@OARcorp.com>
34
35        * startup/linkcmds, startup/linkcmdsflash, startup/linkcmdsram: Add
36        wildcard to gcc_except_table section so programs compiled with gcc
37        4.3.x can link.
38
392007-12-14      Chris Johns <chrisj@rtems.org>
40
41        * gdb-init: Make the first hb temporary.
42        * network/network.c: Add support for reading the MAC address from
43        the FEC if set by the boot monitor. dBug does not do this unless
44        the network is used which is a shame.
45
462007-12-14      Chris Johns <chrisj@rtems.org>
47
48        * gdb-init: Add the show-exception.
49
502007-12-11      Joel Sherrill <joel.sherrill@OARcorp.com>
51
52        * include/bsp.h, startup/bspstart.c: Eliminate copies of the
53        Configuration Table. Use the RTEMS provided accessor macros to obtain
54        configuration fields.
55
562007-12-04      Joel Sherrill <joel.sherrill@OARcorp.com>
57
58        * startup/bspstart.c: Move interrupt_stack_size field from CPU Table to
59        Configuration Table. Eliminate CPU Table from all ports. Delete
60        references to CPU Table in all forms.
61
622007-12-03      Joel Sherrill <joel.sherrill@OARcorp.com>
63
64        * Makefile.am, startup/bspstart.c: Moved most of the remaining CPU
65        Table fields to the Configuration Table. This included
66        pretasking_hook, predriver_hook, postdriver_hook, idle_task,
67        do_zero_of_workspace, extra_mpci_receive_server_stack,
68        stack_allocate_hook, and stack_free_hook. As a side-effect of this
69        effort some multiprocessing code was made conditional and some style
70        clean up occurred.
71
722007-12-03      Chris Johns <chrisj@rtems.org>
73
74        * console/console.c: Set the baud rate for stdin to 19200 when
75        opening the console. This is the default rate for the dbug
76        monitor.
77        * gdb-init: New.
78
792007-11-26      Joel Sherrill <joel.sherrill@oarcorp.com>
80
81        * startup/bspstart.c: Eliminate the interrupt_vector_table field in the
82        m68k CPU Table since it is never read.
83
842007-05-03      Joel Sherrill <joel@OARcorp.com>
85
86        * startup/linkcmds: Handle .data.* sections
87
882007-04-12      Ralf Corsépius <ralf.corsepius@rtems.org>
89
90        * bsp_specs: Remove qrtems_debug.
91
922007-03-12      Joel Sherrill <joel@OARcorp.com>
93
94        * include/coverhd.h, start/start.S, startup/bspclean.c,
95        startup/bspstart.c, startup/linkcmds, startup/linkcmdsflash,
96        startup/linkcmdsram: Correct license URL and/or fix mistake in
97        copyright notice. Both of these mistakes appear to be from code
98        submitted after these changes were made previously.
99
1002007-03-11      Joel Sherrill <joel@OARcorp.com>
101
102        * startup/bspstart.c: Remove assignments of
103        Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
104        value in boot_card.c
105
1062007-03-10      Joel Sherrill <joel@OARcorp.com>
107
108        PR 1227/bsps
109        * include/bsp.h: Remove MAX_LONG_TEST_DURATION and
110        MAX_SHORT_TEST_DURATION. They are obsolete and unused.
111
1122006-12-15      Ralf Corsépius <ralf.corsepius@rtems.org>
113
114        * network/network.c: Use ioctl_command_t as arg in ioctl-functions.
115
1162006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
117
118        * configure.ac: New BUG-REPORT address.
119
1202006-11-15      Joel Sherrill <joel@OARcorp.com>
121
122        * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
123        file and simplified initialization.
124
1252006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
126
127        * Makefile.am: Remove superfluous -DASM.
128
1292006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
130
131        * configure.ac: Require autoconf-2.60. Require automake-1.10.
132
1332006-09-11      Joel Sherrill <joel@OARcorp.com>
134
135        * console/console.c, startup/init5235.c: Convert C++ style comments to
136        C style.
137
1382006-06-23      Worth Burruss <worth@motioncontrol.org>
139
140        * Makefile.am, README, startup/init5235.c, startup/linkcmds,
141        startup/linkcmdsflash, startup/linkcmdsram: Modify to the mcf5235
142        eval boards to either load and run from ram using the dBug moniter as
143        the boot deviced (Board setup as shipped from the factory), or it
144        allows the user to Boot his code from flash he loads onto the eval
145        board. The code changes between the two are based on the selected
146        linker script using a variable in the script.  The options to the
147        linker are used to override the default linker script and select
148        which options to configure at boot either from flash, or from ram:
149            -qnolinkcmds -T linkcmdsflash
150        If no options are given the standard linker sript assumes dBug was
151        used to set up the board and the user is going to load his program
152        to RAM.
153
1542006-02-08      Joel Sherrill <joel@OARcorp.com>
155
156        * startup/linkcmds, startup/linkcmdsflash, startup/linkcmdsram: Add
157        sections required by newer gcc versions.
158
1592006-01-11      Ralf Corsepius <ralf.corsepius@rtems.org>
160
161        * Makefile.am: Add preinstall.am.
162
1632005-11-07      Ralf Corsepius <ralf.corsepius@rtems.org>
164
165        * console/console.c: Eliminate unsigned32, unsigned8.
166        * include/bsp.h: Eliminate unsigned32.
167        * startup/bspstart.c: Eliminate unsigned32.
168
1692005-06-17      Mike Bertosh <mbertosh@motioncontrol.org>
170
171        * .cvsignore, ChangeLog, Makefile.am, README, bsp_specs, configure.ac,
172        clock/clock.c, console/console.c, include/bsp.h, include/coverhd.h,
173        include/tm27.h, network/network.c, start/start.S, startup/bspclean.c,
174        startup/bspstart.c, startup/init5235.c, startup/linkcmds,
175        startup/linkcmdsflash, startup/linkcmdsram, timer/timer.c: New files.
176
Note: See TracBrowser for help on using the repository browser.