source: rtems/c/src/lib/libbsp/m68k/idp/startup/bspstart.c @ 634e746

4.104.114.84.95
Last change on this file since 634e746 was 634e746, checked in by Joel Sherrill <joel.sherrill@…>, on 01/29/97 at 00:28:47

All RTEMS system call implementation renamed to be rtems_*.

  • Property mode set to 100644
File size: 6.0 KB
RevLine 
[ac7d5ef0]1/*  bsp_start()
2 *
3 *  This routine starts the application.  It includes application,
4 *  board, and monitor specific initialization and configuration.
5 *  The generic CPU dependent initialization has been performed
6 *  before this routine is invoked.
7 *
8 *  INPUT:  NONE
9 *
10 *  OUTPUT: NONE
11 *
12 *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
13 *  On-Line Applications Research Corporation (OAR).
14 *  All rights assigned to U.S. Government, 1994.
15 *
16 *  This material may be reproduced by or for the U.S. Government pursuant
17 *  to the copyright license under the clause at DFARS 252.227-7013.  This
18 *  notice must appear in all copies of this file and its derivatives.
19 *
20 *  $Id$
21 */
22
[88d594a]23#include <bsp.h>
[3a4ae6c]24#include <rtems/libio.h>
25 
[88d594a]26#include <libcsupport.h>
[3a4ae6c]27 
28#include <string.h>
29#include <fcntl.h>
30 
31#ifdef STACK_CHECKER_ON
32#include <stackchk.h>
33#endif
[ac7d5ef0]34
35unsigned char *duart_base;
36extern struct duart_regs duart_info;
37
38#define DELAY 5000
39
40void led_putnum();
41
42/*
43 *  The original table from the application and our copy of it with
44 *  some changes.
45 */
46 
47extern rtems_configuration_table  Configuration;
48rtems_configuration_table         BSP_Configuration;
49
50rtems_cpu_table Cpu_table;
51 
[3a4ae6c]52char *rtems_progname;
53
[ac7d5ef0]54/*      Initialize whatever libc we are using
55 *      called from postdriver hook
56 */
57 
58void bsp_libc_init()
59{
60    extern int end;
61    rtems_unsigned32        heap_start;
62 
63    heap_start = (rtems_unsigned32) &end;
64    if (heap_start & (CPU_ALIGNMENT-1))
65        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
66 
67        /* Create 64 KByte memory region for RTEMS executive */
68    RTEMS_Malloc_Initialize((void *) heap_start, 64 * 1024, 0);
[3a4ae6c]69
70    /*
71     *  Init the RTEMS libio facility to provide UNIX-like system
[634e746]72     *  calls for use by newlib (ie: provide __rtems_open, __rtems_close, etc)
[3a4ae6c]73     *  Uses malloc() to get area for the iops, so must be after malloc init
74     */
75
76    rtems_libio_init();
[ac7d5ef0]77 
78    /*
79     * Set up for the libc handling.
80     */
81 
82    if (BSP_Configuration.ticks_per_timeslice > 0)
83        libc_init(1);                /* reentrant if possible */
84        else
85        libc_init(0);                /* non-reentrant */
[3652ad35]86}
87
88/*
89 *  Function:   bsp_pretasking_hook
90 *  Created:    95/03/10
91 *
92 *  Description:
93 *      BSP pretasking hook.  Called just before drivers are initialized.
94 *      Used to setup libc and install any BSP extensions.
95 *
96 *  NOTES:
97 *      Must not use libc (to do io) from here, since drivers are
98 *      not yet initialized.
99 *
100 */
101 
102void
103bsp_pretasking_hook(void)
104{
105    bsp_libc_init();
[ac7d5ef0]106 
[3652ad35]107#ifdef STACK_CHECKER_ON
[ac7d5ef0]108    /*
109     *  Initialize the stack bounds checker
[3652ad35]110     *  We can either turn it on here or from the app.
[ac7d5ef0]111     */
112 
113    Stack_check_Initialize();
114#endif
[3652ad35]115 
116#ifdef RTEMS_DEBUG
117    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
118#endif
[ac7d5ef0]119}
120 
121
[3a4ae6c]122/*
123 * After drivers are setup, register some "filenames"
124 * and open stdin, stdout, stderr files
125 *
126 * Newlib will automatically associate the files with these
127 * (it hardcodes the numbers)
128 */
129 
130void
131bsp_postdriver_hook(void)
132{
133  int stdin_fd, stdout_fd, stderr_fd;
[9700578]134  int error_code;
135 
136  error_code = 'S' << 24 | 'T' << 16;
[3a4ae6c]137 
[634e746]138  if ((stdin_fd = __rtems_open("/dev/console", O_RDONLY, 0)) == -1)
[9700578]139    rtems_fatal_error_occurred( error_code | 'D' << 8 | '0' );
[3a4ae6c]140 
[634e746]141  if ((stdout_fd = __rtems_open("/dev/console", O_WRONLY, 0)) == -1)
[9700578]142    rtems_fatal_error_occurred( error_code | 'D' << 8 | '1' );
[3a4ae6c]143 
[634e746]144  if ((stderr_fd = __rtems_open("/dev/console", O_WRONLY, 0)) == -1)
[9700578]145    rtems_fatal_error_occurred( error_code | 'D' << 8 | '2' );
[3a4ae6c]146 
147  if ((stdin_fd != 0) || (stdout_fd != 1) || (stderr_fd != 2))
[9700578]148    rtems_fatal_error_occurred( error_code | 'I' << 8 | 'O' );
[3a4ae6c]149}
150
151int main(
[ac7d5ef0]152  int argc,
153  char **argv,
154  char **environp
155)
156{
[497428a2]157  m68k_isr_entry *monitors_vector_table;
158  int             index;
[ac7d5ef0]159
[3a4ae6c]160  if ((argc > 0) && argv && argv[0])
161    rtems_progname = argv[0];
162  else
163    rtems_progname = "RTEMS";
164
[ac7d5ef0]165  duart_base = (unsigned char *)DUART_ADDR;
166
167  /*
168   *  Set the VBR here to the monitor's default.
169   */
170
[497428a2]171  monitors_vector_table = (m68k_isr_entry *)0;
172   /* This is where you set vector base register = 0 */
[ac7d5ef0]173  m68k_set_vbr( monitors_vector_table );
174
175  /* The vector interrupt table for the 680x0 is in appendix B-2
176         of the M68000 Family Programmer's reference table */
177  for ( index=2 ; index<=255 ; index++ )
178    M68Kvec[ index ] = monitors_vector_table[ 32 ];
179
180
181  M68Kvec[  2 ] = monitors_vector_table[  2 ];   /* bus error vector */
182  M68Kvec[  4 ] = monitors_vector_table[  4 ];   /* breakpoints vector */
183  M68Kvec[  9 ] = monitors_vector_table[  9 ];   /* trace vector */
184
185  /*
186   *  Set the VBR here if you do not want to use the monitor's vector table.
187   */
188
189  m68k_set_vbr( &M68Kvec );
190
191  m68k_enable_caching();
192
193  /*
194   *  we only use a hook to get the C library initialized.
195   */
196 
[3652ad35]197  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
198
199  Cpu_table.predriver_hook = NULL;
200
[3a4ae6c]201  Cpu_table.postdriver_hook = bsp_postdriver_hook;
[3652ad35]202
[ac7d5ef0]203  Cpu_table.idle_task = NULL;  /* do not override system IDLE task */
204
205  Cpu_table.do_zero_of_workspace = TRUE;
206 
[497428a2]207  Cpu_table.interrupt_vector_table = (m68k_isr_entry *) &M68Kvec;
[ac7d5ef0]208 
209  Cpu_table.interrupt_stack_size = 4096;
210
[8cbbe312]211  Cpu_table.extra_mpci_receive_server_stack = 0;
[ac7d5ef0]212
213  /*
214   *  Copy the table
215   */
216 
217  BSP_Configuration = Configuration;
218 
219  BSP_Configuration.work_space_start = (void *)
220     (RAM_END - BSP_Configuration.work_space_size);
221 
222  /*
223   * Add 1 region for the RTEMS Malloc
224   */
225 
[e6d4b1d]226  BSP_Configuration.RTEMS_api_configuration->maximum_regions++;
[ac7d5ef0]227 
228  /*
229   * Add 1 extension for newlib libc
230   */
231 
232#ifdef RTEMS_NEWLIB
233    BSP_Configuration.maximum_extensions++;
234#endif
235 
236  /*
237   * Add another extension if using the stack checker
238   */
239 
240#ifdef STACK_CHECKER_ON
241    BSP_Configuration.maximum_extensions++;
242#endif
243 
[3a4ae6c]244  /*
245   * Tell libio how many fd's we want and allow it to tweak config
246   */
247
248  rtems_libio_config(&BSP_Configuration, BSP_LIBIO_MAX_FDS);
249
[ac7d5ef0]250/*  led_putnum('e'); * for debugging purposes only */
251  rtems_initialize_executive( &BSP_Configuration, &Cpu_table );/* does not return */
252 
253  /* Clock_exit is done as an atexit() function */
254
255  return 0;
256}
Note: See TracBrowser for help on using the repository browser.