source: rtems/c/src/lib/libbsp/m68k/efi332/README @ b1b5a7cb

4.104.114.84.95
Last change on this file since b1b5a7cb was 486c329, checked in by Joel Sherrill <joel.sherrill@…>, on Sep 20, 1995 at 3:05:19 PM

Actually adding efi bsp's from John Gwynne after forgetting to
commit them.

  • Property mode set to 100644
File size: 1.4 KB
Line 
1#
2#  $Id$
3#
4
5Description: efi68k
6============
7CPU: MC68332 @16MHz
8RAM: 256k max. (supports several configurations)
9ROM: 512k (supports several configurations)
10
11   This general purpose controller has been designed by a group of
12Internet subscribes to the mailing list "efi332" (an offshoot of the
13"diy_efi" mailing list). Although efi332 was initially designed for
14automotive research, it is a fairly generalized embedded controller
15when used without the companion EFI board. It is patterned much after
16the the Motorola BCC but cost on the order of $250US. A 4x3 inch
17(approx.) printed circuit board is available.  For complete
18information see
19
20        http://www.cim.swin.edu.au/wwwhome/aden/efi332/332_index.html
21
22TODO:
23=====
24- add separate interrupt stack (low priority).
25
26- add a timer driver for the tmtest set.
27
28- generate include/coverhd.c to preform the tmtest.
29
30- the interrupt drive I/O should be integrated into the RTEMS.
31
32- finish the ROM memory model.
33
34
35                                       John S Gwynne
36                                          Gwynne.1@osu.edu
37_______________________________________________________________________________
38               T h e   O h i o - S t a t e   U n i v e r s i t y
39    ElectroScience Laboratory, 1320 Kinnear Road, Columbus, Ohio 43212, USA
40                Telephone: (614) 292-7981 * Fax: (614) 292-7297
41-------------------------------------------------------------------------------
42
Note: See TracBrowser for help on using the repository browser.